Question about 2000 Chevrolet Venture
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
If the fluid is dark, burnt , or has metal or dark clutch material.
The transmission has a burnt up clutches ,the sun shell in most cases with this transmission is the cause of failure inside.The sun shell holds the clutches and steels in place . When the sun shell breaks the transmission is loosing pressure inside. Then the clutch are not engaging . This is why the transmission is slipping This is a very common problem with this vehicle. The sensors/ soleniods are located in the valve body of the transmision. There are some cases where a transmission shop can tighten the sun shell or bands. This could be a temporary fix, The best thing to do is have the transmission replaced or rebuilt at your local transmission repair shop
Posted on Feb 03, 2009
Most commonly with these cars the security system will do this if the battery is "drained" while trying to start the car. ie: a low battery that is too weak to turn the engine over. Usualy the power options & accesories will not work if this is happening.
To fix it you will need to ensure the battery is charged, you then disconnect the battery negative cable for about 1 minute with the key out of the ignition. reconnect the battery cable & start the car normally. Everything should be back to normal.
Let me know if there is anything more you need for this concern.
Posted on Mar 17, 2009
SOURCE: jump start 2000 venture
In order to reach the negative terminal to the battery in a 2000 Vebture (I have one) you must first remove the fuse housing. The fuse housing is a large black box that sits atop the battery. There os a single bolt that holds it in place located in fron of the battery bolted into the lip of the motor bay. Unscrew this, then unhook the fuse housing from the cross bar running from the back roght to the front of the motor bay. This is a tight fit so watch your knuckles. Once the fuse housing is out, the negative terminal is located on the backside of the battery. It is a tight squeeze black is negative, red is positive.
Posted on Apr 02, 2009
there should be information in your owner manual telling you how to do it if you have miss place your owner manual try this website to see if you can down load one for your car its www.edmunds.com and i hope i was able to help you Michigan Man
Posted on May 12, 2009
Tips for a great answer:
Jan 03, 2014 | 2000 Chevrolet Venture
Jan 14, 2011 | 2000 Chevrolet Venture
Dec 26, 2010 | 2000 Chevrolet Venture
Nov 06, 2009 | 1999 Chevrolet Venture
Aug 10, 2009 | 2000 Chevrolet Venture
Jul 15, 2009 | 2001 Chevrolet Venture
Jan 03, 2009 | 2000 Chevrolet Silverado
Jan 01, 2009 | 1999 Chevrolet Venture
Nov 21, 2008 | 1999 Chevrolet Venture
Feb 26, 2015 | 2000 Chevrolet Venture
29 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: