Question about Cars & Trucks

1 Answer

Refitting the resevoir into the new gromits is their a sequence or do you just apply preessure

Posted by on


1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 20 achievements.


    An expert that got 10 achievements.


    An expert that got 5 achievements.

  • Cars & Trucks Master
  • 4,483 Answers

Lots of things on cars these days are held in place by grommets and some are rather tight and need a firm pressure to fit or remove. Often the application of a rubber-friendly lubricant to both the male and female parts can ease fitting considerably. Something like soft soap or detergent will soon disappear but a silicone lubricant can remain considerably longer and aid future dismantling.

Posted on May 20, 2017


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

2 Answers

2003 Ltd 4runner CEL and Track lights on Scanner

it is right under the brake fluid resevoir

Sep 27, 2013 | Cars & Trucks

1 Answer

Want to know the amount of torque pressure do i use when tightening the head bolts, and whats the sequence?

To install:

0996b43f80208f65.jpg enlarge_icon.gifenlarge_tooltip.gif

Fig. Cylinder head bolt torque sequence-3.8L engine

  1. Install the new cylinder head gasket with the arrow pointing to the front of the engine.
  2. Install the cylinder head.
  3. Install NEW cylinder head bolts. Torque the bolts in sequence, as follows:
    1. Step 1: 37 ft. lbs. (50 Nm).
    2. Step 2: Plus 120 degree turn.
To install:

0996b43f802316ea.jpg enlarge_icon.gifenlarge_tooltip.gif

Fig. Tighten the cylinder head bolts using the following sequence-31L and 3.4L engines

  1. Install the cylinder head with a new gasket.
  2. Apply thread sealer to the head bolts.
  3. Tighten the cylinder head bolts to 37 ft. lbs. (50 Nm) plus an additional 90 degree turn.

Dec 16, 2010 | 2002 Pontiac Grand Prix

1 Answer

Abs light is on and brake pedal is very hard

If you open the hood and look to the right front, you will see a resevoir. If this resevoir is dry due to a leak, it will not help assist to apply the brakes. This is very dangerous due to the weight of the vehicle. The resevoir should be green and tell you what fluid to use. This is very critical. the assist for the brakes on these models is hydraulic.

Nov 01, 2010 | 1988 Jaguar XJ6

1 Answer

Whats the bolt pattern for my 1995 ford escort head?

1.8 liter..NOTE: Lubricate the cylinder head bolts using the specified engine oil.

Install the cylinder head bolts. Tighten the cylinder head bolts in 2 or 3 steps in the sequence shown to 76-81 Nm (56-60 lb-ft).

1.9 liter
Apply a light coating of engine oil to the threads of the new cylinder head bolts. Install the new cylinder head bolts to the cylinder head. Following the sequence shown below, tighten the cylinder head bolts to 40-60 Nm (30-44 lb-ft). Loosen all cylinder head bolts approximately two turns, then retighten the cylinder head bolts to 60 Nm (44 lb-ft) following the sequence shown. After tightening, turn all bolts 90 degrees, in the same sequence. Complete bolt tightening by turning them an additional 90 degrees, in the same sequence. 398246b.gif

Aug 21, 2010 | 1995 Ford Escort

1 Answer

How to R&R a front Turn signal bulb from a 2007 Hyundai Entourage

look at position of bulb inside lamp assy then open bonnet feel behind h/lamp at location of indicator bulb you will locat the bulb wire socket turn this socket anti clockwise slightly it will release the socket complete with bulb pull it out then fit new bulb make sure bulb is correct one! ie the locating bayonet pins are same ? then refit socket with new bulb in reverse sequence test working

Nov 08, 2009 | 2007 Hyundai Entourage Limited Minivan

1 Answer

Applying the indicator they will blink but then stop

Go and get yourself a new flasher unit
Find the other one first by by the clicking and remove ,,and then go into the auto shop and get one the same and refit in in the place the old one came out of..

Have a goodday

Sep 24, 2009 | 2003 Volkswagen Passat

1 Answer

Hyundai Excel Rear Supension 99-2000 model

1. Apply the specified grease to the inside of the left suspension.
2. Using special tools (09555-21100, 09555-21000), drive bushings, into the suspension arm.

1) Apply grease to all outside surfaces of bushings.
2) Drive bushing in until the notch on the special tool
(09555-21000) reaches the end of the suspension arm.
3. When replacing the dust cover, insert a new one up to the center position (stopper) of the right suspension arm.
4. After applying grease to the surface of the right suspension arm, install the rubber stopper.
5. Slowly push the right and left suspension arms together. Wipe away the surplus grease. Align the marks on the stabilizer bar and the stabilizer bar bracket.
6. Install the rubber bushings, fixtures and washers.
7. After aligning the fixtures with the suspension arms according to the alignment marks, loosely tighten the nuts.

1) Install the washers and fixtures in the correct direction
and position as shown.
2) Tighten the nut to specification with the vehicle lowered
to the floor.

8. Pack grease in the dust cover and lips, and secure the dust cover with the clamp.

Jun 21, 2008 | 1994 Hyundai Excel

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

15 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts


Level 3 Expert

78936 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

john h

Level 3 Expert

13632 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides