Question about Nissan Cars & Trucks

1 Answer

Fuel pressure specs on 2000 Nissan Altima - Nissan Cars & Trucks

Posted by on


1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 20 achievements.


    An expert that got 10 achievements.


    An expert that got 5 achievements.

  • Nissan Master
  • 4,526 Answers

I don't have the specs for the Altima but looking through the range, all the Nissan specs I do have for that year are maximum 3 bar unregulated and 2.5 bar regulated, most in fact are a little less and unusually the actual pressures are quoted to two decimal places, such as 2.34 or 2.43 bar. Broadly, for testing it is not necessary to be as precise as that because if absolute accuracy is required the battery voltage would need to be stable, the ambient and the fuel temperature recorded and compensated for and probably the amount of fuel in the tank would make a minute difference. Such things are impractical.

The fuel pressure is important but a fuel system test would not be complete unless the fuel delivery volume has been checked in addition. That figure I don't have but a rule-of-thumb guide is 1 litre in 10 seconds is the minimum. Great care must be exercised while testing all aspects of the fuel system.

Posted on May 20, 2017


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

2000 Nissan Altima, 132,000 miles, had water pump changed and lost oil pressure immediately

At get complete guide on whether
to repair or not, service it, and how to repair etc, along with wiring diagrams, electrical diagrams, torque specs, error codes, everything.

Mar 01, 2018 | Nissan Cars & Trucks

1 Answer

What should fuel presure be and what type of gage should you use

Most parts stores will have a loan-a-tool pressure gauge. Your shop manual will have the pressure spec. Don't have a manual? You should buy one for lots of usful info.

Mar 10, 2016 | 2006 Nissan Altima

1 Answer

Replaced the fuel pump and filter on a 2000 Nissan Altona it's shooting fuel from the pump but not near the filter what can cause this

Nissan fuel pump recall : Nissan Altima Common Engine ... > Problems > Nissan > Altima
Nissan issued a recall on the fuel pump for premature failure. ... I am in need of a newfuel pump and scared to drive my car and its leaking ... pump and fuel filter located and how can i access them if i wan to replace th. ... 2000 Nissan Altima.

Fuel pump and fuel filter - 2003 Nissan Altima - RepairPal > Questions > Nissan > Altima > 2003 Nissan Altima
Mar 25, 2009 - Where is the fuel pump and fuel filter located and how can i access them if i wan to replace them?

Fuel Pump Replacement Cost for Nissan Altima - RepairPal ...

How To Replace Fuel Filter on Nissan Altima 2001 - YouTube? 6:46 25, 2011 - Uploaded by roluardoHow To Replace Fuel Filter on Nissan Altima 2001 ... How toreplace a 2002 Nissan 3.5 Maxima Fuel Filter 2000-2004 pt 1 - Duration: 14:20.fuel hose replacement. Car fuel leakage. fuel pump ...? 5:30 4, 2014 - Uploaded by LearningZoneHere I am going to illustrate the fuel hoses (fuel lines)replacement for Nissan Sentra ... Fuel pump leak fix - quick and cheap - Duration: 11:16.

Jan 13, 2016 | Nissan Cars & Trucks

1 Answer

Fuel pressure specs

Most fuel pumps can put out a pressure of 90 PSI , no petrol injectors work at this pressure, the pressure is controlled by the fuel rail regulator ,

Mar 14, 2015 | 2001 Nissan Altima

1 Answer

What is the fuel flow specs for 2001 nissan altima

what is more importaint is fuel pressure about 35-45 lb

Nov 30, 2014 | 2001 Nissan Altima

1 Answer

What is the specs for 2000 Nissan Altima torque and sequence for head bolts

best to buy a repair manual, all specs will be listed for all the work intaled to do what your doing..

Aug 27, 2014 | 2000 Nissan Altima

1 Answer

2000 nissan altima wheel/lugnut question

it will fit since I notice that the rim has a universal hole that can fit both PCD100 and PCD 114.

I’m happy to assist further over the phone at

Feb 02, 2010 | 2000 Nissan Altima

1 Answer

2000 altima starts but shuts off

change fuel filer if still happens check fuel pressure.change plugs and wires if they have not been change.

Apr 29, 2009 | 2000 Nissan Altima

1 Answer

What is the valve cover torque sequence for a 2000 nissan altima

No spec for torque. Bolts have shoulders. Replace gasket. Tighten the 2 center nuts first and just tighten the rest until they stop. You can tighten one and jump across the valve cover and do the other, but not necessary.

Sep 27, 2008 | 2000 Nissan Altima

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

45 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nissan Experts


Level 3 Expert

80407 Answers

Phil Lovisek
Phil Lovisek

Level 3 Expert

726 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

Are you a Nissan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides