Question about Oldsmobile Cars & Trucks
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
maybe the wire is severed where the door (drver dr) pivots. thats what was wrong with mine. there is a rubber boot with crinkles in it that hold all the wires together. you can also try replacing the switch board that controls the wndws on the drvr dr. hope that helps.
Posted on Jan 20, 2009
disconnect battery,three bolts hold it to bell housing and two wires ,one is the feed the other activates the solonoid Easy job to do but dirty dirt grease and muck
Posted on Jan 24, 2009
ALL YOU NEED IS 3/8 RATCHET WITH A 5/8 SPARK PLUG SOCKET.YOU NEED EXTENSIONS AND UNIVERSAL JOINTS TO GET TO HARD TO REACH PLACES.YOU NEED A SPARK PLUG GAUGE.YOUR SPARK PLUG GAP SETTING WILL BE. 0.060 THAT WILL BE FOR THE 2.2 AND 3.1 ENGINES.
Posted on Aug 17, 2009
Testimonial: "Thank you very much for your advice and time!"
Checkk the EGR system for the EGR valve should open when the engine gets to operating temperature. If not the engine will stall out
Posted on Jun 19, 2010
Tips for a great answer:
Dec 24, 2013 | 1991 Oldsmobile Cutlass Ciera
Oct 17, 2017 | 1991 Oldsmobile Cutlass Ciera
Jun 22, 2012 | 1991 Oldsmobile Cutlass Ciera
Jul 01, 2011 | 1991 Oldsmobile Cutlass Ciera
Dec 01, 2009 | 1991 Oldsmobile Cutlass Ciera
Jun 27, 2009 | 1989 Chevrolet Corvette
Feb 06, 2009 | 1991 Oldsmobile Cutlass Ciera
Feb 03, 2009 | 1988 Oldsmobile Cutlass Ciera
22 people viewed this question
Usually answered in minutes!