Question about Pontiac Cars & Trucks

Open Question

What was the engine capacity of the pontiac tempest of the year 1961

Posted by on

Ad

3 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

Ad
  • 1606 Answers

SOURCE: what wires are connected to the ignition of a 1990 pontiac tempest

I assume you mean the ignition keyswitch. You'll have 12 Volt ignition power from the IGN fuse or fusible link. There will also be an ignition terminal and a starter solenoid terminal. If you have the GM key security system (with the little black and silver resistor embedded in the ignition key), there will be two more wires going to the engine computer for checking the resistor.
I don't have the wire identification for these, except an educated guess that the power and solenoid wires will probably be the largest ones, and the power wire is most likely red. The solenoid and ignition wires probably have different colored stripes on the insulation. The anti-theft key wires are functionally interchangeable, although they may share a one-way connector that plugs into the switch (they are probably also the smallest wires since they don't need to carry a lot of current).

Posted on Nov 03, 2011

Ad
mccluskey1
  • 8213 Answers

SOURCE: what is the maximum speed of pontiac tempest 110 hp 1961

Pontiac Tempest

Posted on Nov 30, 2016

Testimonial: "thanks"

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What is the power of engine truck ford f-350 6 cylinder 1962


Powertrain[edit] If it's a stock engine, not changed out, probably 132hp.
Engine Years Power 223 CID Mileage Maker I6 1961-64 114 hp (85 kW) 262 CID Mileage Maker I6 1961-64 132 hp (98 kW) 292 CID Y-block V8 1961-64 170 hp (130 kW) 240 CID Straight-6 1965-66 150 hp (110 kW) 300 CID Straight-6 1965-66 170 hp (130 kW) 289 CID Windsor V8 (Mexican market) 1965-66 160 hp (120 kW) 352 CID FE V8 1965-66 208 hp (155 kW)

Nov 07, 2017 | Ford Cars & Trucks

1 Answer

Morris 1961 piston diameter


2.54"bore X 3.3" stroke
was a 1098 cc capacity engine of 48 bhp (35.8 KW )
any more --www.carfolio.com

Oct 13, 2017 | Morris Cars & Trucks

1 Answer

How do I change the coil pack of a 1991 pontiac tempest


Unbolt the coil pack, coat bottom of new coil pack with dielectric grease and install.

Dec 02, 2014 | Pontiac Cars & Trucks

1 Answer

1968 gto refrigerant capacity ?


according to an old Chilton's Repair Manual I have (1969) the refrigerant capacity is 4 1/4 lbs.for the '63-'69 pontiac and the '63-'69 Tempest is 3 3/4 lbs. Since the GTO would be an 8 cylinder I would expect the higher capacity. The oil capacity is 6 qts. plus 1 for a new filter for both the 350 and 400 CID

Jul 13, 2014 | 1968 Pontiac GTO

1 Answer

What size of hex wrench or type of screwdriver would one use to adjust the dwell on a Pontiac 326?


they have a flexable driver for that I think back in the day it was1/8 allen wrench with the dwell meter

May 22, 2014 | 1967 Pontiac GTO

1 Answer

What wires are connected to the ignition of a 1990 pontiac tempest


I assume you mean the ignition keyswitch. You'll have 12 Volt ignition power from the IGN fuse or fusible link. There will also be an ignition terminal and a starter solenoid terminal. If you have the GM key security system (with the little black and silver resistor embedded in the ignition key), there will be two more wires going to the engine computer for checking the resistor.
I don't have the wire identification for these, except an educated guess that the power and solenoid wires will probably be the largest ones, and the power wire is most likely red. The solenoid and ignition wires probably have different colored stripes on the insulation. The anti-theft key wires are functionally interchangeable, although they may share a one-way connector that plugs into the switch (they are probably also the smallest wires since they don't need to carry a lot of current).

Nov 02, 2011 | Cars & Trucks

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

29 people viewed this question

Ask a Question

Usually answered in minutes!

Top Pontiac Experts

yadayada
yadayada

Level 3 Expert

78267 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8836 Answers

Are you a Pontiac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...