Question about 2007 Chevrolet Avalanche LTZ

Open Question

How to remove right front headlight assembly to replace day time running light bulb?

Posted by on

  • awreford0719 Aug 04, 2009

    Took the Avalanche to the dealer and they spent 1 hour removing the light assembly witout breaking it.

    Thanks

  • mithila011
    mithila011 May 11, 2010

    Here is some great CAR solution by Some FIXYA EXPERT. Get any kinds of CAR solution from bellow.

    » BMW ( 3876 Solution ) » Buick ( 2987 Solution ) » Chevrolet (12345 Solution )
    » Chrysler ( 3456 Solution ) » Dodge ( 4765 Solution )
    » Ford ( 11345 Solution )
    » GMC ( 6754 Solution ) » Honda ( 8943 Solution )
    » Hyundai ( 4187 Solution )
    » Jaguar ( 2876 Solution )
    » Lincoln ( 3346 Solution )
    » Mazda ( 3781 Solution )
    » Mercury ( 8762 Solution )
    » Mitsubishi ( 4765 Solution )
    » Nissan ( 7654 Solution )
    » Oldsmobile ( 2467 Solution )
    » Pontiac (1986 Solution )
    » Saturn ( 3997 Solution )
    » Subaru ( 4225 Solution )
    » Suzuki ( 4832 Solution )
    » Toyota ( 9761 Solution )
    » Volkswagen ( 4681 Solution )
    » Volvo ( 2875 Solution ) aa-55

×

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 1 Answer

SOURCE: Removing Headlight assembly

There is a small hex headed fastener behind the headlight, oriented vertically. Loosen this and remove it, it is long and passes through the body of the light housing to threads below. You then pull the headlight housing forward, its still held in place by several friction fasteners so it may take a little force but it will "pop" off and then when you're through you'll have to "pop" in back in.

Posted on Jan 13, 2009

  • 2 Answers

SOURCE: cannot remove tail light assembly

I had the HARDEST time with the lights...I never realized changing a bulb would be so difficult. Once you unscrew what you need to, go into the trunk and pull the lining away from the back part of the light. There are the white prongs that you will need to tap with a hammer until they pop out and then the light assembly will come out. Be careful though, I got a little too impatient and broke mine. I used a binding agent to hold it back in place though...GOOD LUCK!

Posted on Nov 29, 2008

  • 1 Answer

SOURCE: how to replace low beam headlight bulb on 1999 chevy malibu

just have a philip screw driver, remove the screw, pull out the light and take the light to the nearst aurozone and they will give you the right light, and put it back the same way.

Posted on Dec 30, 2008

  • 1 Answer

SOURCE: 2003 Mercury Sable headlight bulb replacement

This problem is now resolved, thanks to a prior post by sableowner.

http://www.fixya.com/cars/t1479995-2001_merc_sable_headlight_replacement

The 2003 Sable has the same headlight assembly and removal/replacement instructions as the 2001 Sable. Once I had this information in hand, bulb replacement was easy.

Posted on Jan 13, 2009

  • 10865 Answers

SOURCE: how 2 change head light bulb on a 2000 z24

To change the bulbs in the headlights,(on a 2002 Z24) you need to remove the plastic splash cover the extends the width of the car over the headlights by removing the plastics pins that hold it in . Pull up on the center of the pins to remove them. Once the cover is off, remove the two bolts that hold the headlight in, then place a screwdriver into the slot for the parking light lens to pop the clip loose that holds the lens in place. The headlight assembly can then be removed, once the wire harness is unplugged from the bulb. There is a round retainer that locks the bulb into place. Rotate the retainer counter clockwise and remove the bulb. Don't touch the bulb surface as oil from a person's hands can cause premature failure. Just reverse these dirctions to reinstall the rest of the parts. This may sound difficult, but it really isn't. I hope this helps out some fellow z owners.

Posted on Feb 17, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to Replace Headlight Bulb on 2005 Prius?


Remove fender well trim ( a few screws)
Remove front bumper COVER (not the bumper- the plastic cover)
About 14 screws. Mostly on the underside, get a creeper, and a few
on the top.

Remove the (left or right side) Headlight assembly ( a couple more screws).
One assembly contains the headlight, turn signal and running light. Unplug
the electrical connector from the assembly. All bulbs remove from the back
of the headlight assembly. Headlight is held in place by bail wire, smaller
bulbs are 1/4 turn.

Oct 20, 2016 | 2005 Toyota Prius

3 Answers

Replace headlight bulb


  1. INSTALLATION GUIDE:
  2. BMW E38 99-01 HID TYPE 7 Series 1PC Halo Amber Projector Headlights
  3. Parts Identification:
  4. Projector Headlight
  5. Halo & L.E.D.
  6. Bottom of the Headlight:
  7. Ballast Bracket, Halo Wires(red/black)
  8. Turn Signal Adaptor
  9. TOOLS REQUIRE
  10. 10mm - 8mm socket
  11. Philip Screwdriver
  12. Crimper/Pliers
  13. For more information about how to install your vehicle, come visit our youtube page on
  14. http://www.youtube.com/spyderauto
  15. Remove the facotry headlight from the BMW. First remove the front panel cover below the headlight to access the bottom screw of the headlight housing. There is also two screws on the top of the housing.
  16. Once you have remove the headlight, turn the headlight around and remove the bracket that holds the Ballast. Then remove the ballast using a philip screwdriver.
  17. Unplug the wire from the ballast, and then remove the Xenon Plug from the housing. Put the Ballast aside.
  18. Carefully remove the D2S Xenon Bulb from the factory housing. Once you have remove the bulb, transfer the bulb to the Spyder headlights.
  19. Remove the bracket from the Spyder Headlight, and then install the ballast on the housing like the original. Once you have put the ballast on, put the bracket back on.
  20. Remove the Panel Cover bracket from the original headlight to the new Spyder Headlights as shown here.
  21. STEP:
  22. Install the Spyder turn signal socket if the orignal does not fit, unplug the factory plug from the harness and plug the new one on.
  23. Install the Spyder Headlight back on to the vehicle. Plug the Harness back on, the halo/L.E.D. Wires is connect to the Parking lights. These wires are optional to your vehicle, you do not have to wire them together.
  24. Factory Xenon Headlight
  25. Spyder Projector Headlight using Factory Xenon Lights
  26. STEP:
  27. PLS VOTE ME
BMW e46 HID Headlight Replace
replace-headlight-bulb-afy5cnsznmokzumyhdcbeseq-5-0.jpg

replace-headlight-bulb-afy5cnsznmokzumyhdcbeseq-5-2.jpg

Nov 23, 2012 | 2000 GMC Denali

2 Answers

Headlights wont work and dash and parking lights come when ignition switch is turned on. sometimes jiggling wires works. what is the problem?


Check out related help links with solutions to troubleshoot these problem.
Click the link below directly:---
Heater fan and headlights will not turn off with ignition off? http://technoanswers.blogspot.com/2012/01/heater-fan-and-headlights-will-not-turn.html

---------
High beams stopped working but headlights still work?

http://howtobyme.blogspot.com/2011/11/highbeams-stopped-working-but.html

---------------
Only one head light works on 2001 Dodge Caravan? http://howtobyme.blogspot.com/2011/11/only-one-head-light-works-on-2001-dodge.html

----------------
Headlight Assembly Removal On Honda Accord http://technoanswers.blogspot.in/2012/06/headlight-assembly-removal-on-honda.html ------------- Honda Headlight Assembly Removal
http://schematicsdiagram.blogspot.in/2012/06/honda-headlight-assembly-removal.html-----------
All headlights not working? http://repairhelpcenter.blogspot.com/2012/01/all-headlights-not-working.html

----------
Headlight wiring diagram for 1997 Lincoln Town Car?

http://technoanswers.blogspot.in/2012/02/headlight-wiring-diagram-for-1997.html

-----------
Dash Lights And Front Marker Lights Flashing On And Off http://schematicsdiagram.blogspot.com/2012/10/dash-lights-and-front-marker-lights.html
---------- 2001 Chevrolet Tracker: Headlights and Dash lights Pulsating? http://whoisbyme.blogspot.in/2012/06/2001-chevrolet-tracker-headlights-and.html
--------- No parking lights and headlights not turning OFF? http://technoanswers.blogspot.com/2012/01/no-parking-lights-and-headlights-not.html
------------- How to replace HID headlight bulbs for lexus 400h? http://schematicsdiagram.blogspot.com/2012/01/how-to-replace-hid-headlight-bulbs-for.html
--------- Head Lights Comes ON by Itself? http://whoisbyme.blogspot.in/2012/07/head-lights-comes-on-by-itself.html
--------- Only high beams work but head lights not working on Ford F350?

http://howtobyme.blogspot.com/2011/11/only-high-beams-work-but-head-lights.html

-------------


Only high beams working on GMC Savana?---------
Working of Headlight switch?

----------
Both headlight bulbs blow together?
--------

Car headlight bulbs don't last long?


--------
How to replace Headlight Bulbs on Lincoln Town Car?

http://howtobyme.blogspot.com/2011/12/how-to-replace-headlight-bulbs-on.html


How to change headlight?

http://repairhelpcenter.blogspot.com/2011/12/how-to-change-headlight.html

-------------
Both headlights and turn signals not working? http://schematicsdiagram.blogspot.com/2011/12/both-headlights-and-turnsignals-not.html

----------
Headlights will not turn OFF on Ford expedition and car trailer?

http://technoanswers.blogspot.com/2012/01/headlights-will-not-turn-off-on-ford.html

----------
Headlight Assembly Removal on 2010 buick lacrosse? http://technoanswers.blogspot.in/2012/04/headlight-assembly-removal-on-2010.html
--------- Headlights flickering and car hesitates to start?

http://howtobyme.blogspot.in/2012/02/headlights-flickering-and-car-hesitates.html

---------
Hummers headlights flashes while start?

http://technoanswers.blogspot.in/2012/02/hummers-headlights-flashes-while-start.html

----------
Using non-AFS headlamp assembly for AFS assembly?

http://schematicsdiagram.blogspot.in/2012/02/using-non-afs-headlamp-assembly-for-afs.html

------------

How to replace Headlight Bulb on 2001 mitsubishi magna
http://www.howtorepairguide.com/2012/10/how-to-replace-headlight-bulb-on-2001.html

---------
These details will help.
Thanks.



Nov 22, 2012 | 1996 Pontiac Grand Am

2 Answers

How do you remove the headlights off a Pontiac grand am 2004


Lighting Headlight, Side Marker, Park & Turn Signal Assembly Removal & Installation To Remove:
  1. Open the hood.
  2. Remove the front air deflector.
  3. Apply light pressure to the headlight lens to hold the headlight in place while disconnecting the retainers.
  4. Lift up the headlight retainers to release the housing.
  5. Remove the headlight assembly, pulling straight forward from the headlight mounting panel. NOTE: Note the location and position of the adjuster retainers and locator tab.
  6. Disconnect the wiring harness from the headlight assembly.
  7. Rotate the bulb(s)/socket(s) as needed counterclockwise to release.
  8. Remove the bulb(s)/socket(s) from the headlight assembly.
To Install:
  1. Install the replacement bulb(s)/socket(s) to the headlight assembly rotating clockwise until fully seated.
  2. Connect the wiring harness to the headlight assembly.
  3. Position the headlight assembly to the mounting panel.
  4. Apply light pressure to the headlight assembly lens to hold the assembly in place while installing the retainers.
  5. Align the headlight assembly retainers and slide them over the assembly mounting tabs
  6. Install the front air deflector.
  7. Close the hood.
prev.gif next.gif

Feb 02, 2011 | 2004 Pontiac Grand Am

1 Answer

Replacing headlight bulb on 2006 maxima


Hello,

Replacing Your headlight bulb seem to be easy when You look at it, but quite technical. But If You get the proper guide, I think fixing this will not be difficult for You. You will be needing these instruments to fix this(Flathead screwdriver, Phillips head screwdriver, 3/8 inch drive ratchet, 3/8 inch drive 10 mm socket, Replacement bulb(s), Shop rags or towel), then You carefully follow the steps below to fix this:
  1. Turn the steering wheel all the way in toward the engine on the side you are changing the light bulb in. For the driver's side bulb replacement, turn the steering wheel all the way to the right. For the passenger side bulb replacement, turn the steering wheel all the way to the left.
  2. Turn the ignition switch to the off position and remove the keys. Make sure the light switch is in the off position.
  3. Remove the retaining clips and screws from the front of the wheel well area, including the bottom splash shield valance underneath the front of the Maxima. The valance is attached to the wheel well and can be left intact. Use the Phillips head screwdriver for the screws and the flathead screwdriver to pop up the center post of the clips and then pry the clips out. Remove enough of the clips to gain access into the front fender cavity.
  4. Locate and turn the outer low-beam headlight cover counterclockwise to remove it. This will reveal the bulb and socket.
  5. Turn the bulb counterclockwise to remove it from the headlight assembly.
  6. Release the retaining pin (if applicable for theft deterrent package).
  7. Remove the wire harness plug from the bulb socket and then remove the bulb.
  8. Insert the new bulb into the socket without touching the glass of the bulb. Reverse the procedure to reinstall.
But if it is the high beams bulb You want to replace, then please follow the steps below, It is the same instruments as before You will be needing to do this job.
  1. Release the hood latch if you're replacing the high beam bulb only. Then lift the hood. Locate the two 10 millimeter bolts at the top of the headlight assembly and remove them with the ratchet and the socket.
  2. Locate the four fascia retaining pins and remove them using the flathead screwdriver. This will allow flexible movement of the fascia to remove the headlight assembly.
  3. Place a shop rag or towel between the tight gap of the fascia and the bottom of the headlight assembly to prevent scratching the fascia.
  4. Maneuver the headlight assembly forward away from the front of the Maxima. There is a guide pin still retaining the assembly in place so apply equal parts of determination and gentleness to remove the assembly without scratching the lens or the fascia.
  5. Remove the headlight assembly far enough to get your hand behind it and remove the seal from the back of the high-beam headlight. Turn the seal counterclockwise to remove.
  6. Turn the bulb counterclockwise to remove from the assembly.
  7. Release the retaining pin (if applicable).
  8. Unplug the wire harness from the light bulb and remove the light bulb.
  9. Plug the new replacement bulb into the wire harness without touching the glass of the bulb.
  10. Reinstall by reversing the procedure.
Hope this information helped. Thank You for using FixYa!!!

Jan 15, 2011 | 2006 Nissan Maxima

2 Answers

How do you replace the front turn signal on a 2005 Buick Terraza?


Changing front, right turn signal on 2005 Buick Terraza: Open hood; when facing the front of vehicle, the right turn signal is on the passenger side (left). The headlight assembly needs to be removed to easily reach the turn signal. On my vehicle, there is a 10 mm screw on the left side. Remove it. There is L-shaped pin on the right side of the headlight assembly. Swing the pin counter-clockwise (to the left). Pull the pin straight up to remove. The headlight assembly is now loose, but there is a pin snapped in a socket on the back of the assembly that still holds the assembly. Pull the headlight assembly hard and straight to the front of the vehicle. When it snaps loose, the assembly is now held just by the rubber gasket surrounding the assembly. You need to gently work the right side of the gasket out of the grill cowling. The assembly should pull straight out. The wires are long enough to lay the headlight assembly in the engine compartment. Finally, the turn signal is now accessible. Twist the light holder counter-clockwise and pull out the light holder. Change the bulb. Do not punch your man-card for credit until you have successfully reinstalled the headlight assembly. It goes back in a little easier the second time. Once you have put the L-pin in place, the screw back, and successfully tested the lights, you can now punch your man-card.

I give the mechanical engineers and designers a D-minus instead of an F only because I was successful on the first try. No light bulb on anything commonly used by people should be this hard to figure out.

Sep 07, 2010 | 2005 Buick Terraza

2 Answers

How do you change the front light on the drivers side.


since i've not personally had a chance to get my hands on this model of vehicle yet, i'm going to make an educated guess based on how it is done on the 02 sierra, since both are gm products. On the sierra there are 2 rods right at where the headlights are under the hood. Remove those rods to release the light bezels, the bezels should be able to be easily removed. from there just remove the bulb from its' socket, disconnect it from the wire, put in the new one and reassemble. Hope this helps

Mar 10, 2010 | 2005 Chevrolet Equinox

2 Answers

Replace driver's side running light


The FRONT running light is serviced by removing the front filler panel just below the grill.
This panel is held in with spring clip retainers and is made to be removed without tools.
Once this panel is removed the bulb is easily accessed.

Mar 03, 2010 | 2000 Chevrolet Silverado 1500

1 Answer

Service light came on and day time running lights


No service light may means a different problem.You need a diagnostic tool in order to clear this light.Replacing only the bulb may not solve your problem.

Oct 05, 2009 | 2002 Chevrolet Cavalier Coupe

1 Answer

How to replace 1998 Ford Contour headlights (with diagram)


Step 1
Remove your Contour's front grille. You can do this by raising the hood and removing two screws that are located on top of the grille.

Step 2 Remove the headlight assembly. The headlight assembly is held into the front of your Contour by three screws. Two screws will be located on top of the assembly, and one on the bottom.

Step 3 Replace the headlight assembly, if necessary. If you are only changing individual bulbs, make sure you replace the correct bulbs. Each assembly holds three light bulbs, including the bright, dim and turn signal bulbs.

Step4 Replace the headlight assembly and reattach the three screws to hold it in place.

Step5 Replace the front grille of your Contour and the two screws that hold it onto the front of the car.


  • It is usually a good idea to replace bulbs together (in pairs). This will allow the bulbs to wear at the same rate.
  • If you choose to replace only the individual light bulbs, do not touch the new light bulbs. The contact of your skin on the bulbs will cause the light bulbs to burn out much sooner.

Let me know if you have any further questions.


Benjamin

Apr 26, 2009 | 1998 Ford Contour

Not finding what you are looking for?
2007 Chevrolet Avalanche LTZ Logo

Related Topics:

474 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

75797 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8152 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...