Question about Cars & Trucks

Open Question

My ever start 1200a did not work out of the box is there a fuse that I can replace

Posted by on

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I jump started my rav4 2005 model) as it had a flat battery but ended up replacing the battery as the old one had a dead cell. In the process I blew the 15amp IGN & 10amp ETCS fuses which I have replaced...


have you checked to see if there is another fuse box under the dash on the drivers side it is not uncommon to have two fuse box locations.

Mar 03, 2015 | Cars & Trucks

1 Answer

My 2003 mitsubishi lancer es standard 5 gears signal lights arent working neither are my bright lights and my windshield wipers only are working on high ?


Sounds like a bad fuse. There are fuse boxes under the hood as well as inside. Try swapping the same number fuses with each other. If what you swap for starts working replace the fuse you swapped with. Alot of times there is a fuse puller in fuse box case and spare fuses.

Aug 15, 2013 | 2003 Mitsubishi Lancer

1 Answer

Gas gage and speedometer not working


You should start with you fuse block itself. For that many different things to be not working the one thing they have in common is the fuse box. if the fuses are good you may have a faulty fuse box itself. Use a voltmeter and test the slots to the fuses for each electrical item. If you dont have voltage going to your fuses then the box needs replacing. If you do then either fuses need replacing or damaged or broken wiring.

Feb 26, 2013 | 2000 Dodge Grand Caravan

1 Answer

How to replace alternator fuse on 2000 lexus es300


In most car models I have had to remove the fuse box retaining bolts and lift the fuse box up and go under the fuse and remove 2 small bolts that retain the heavy alternator fuse in place, it is the only fuse that is bolted in to the box from under the box. Always disconnect the battery negative cable before you start work.

Sep 04, 2012 | 2000 Lexus ES 300

1 Answer

Driver window wont go up and all other windows wont work


Check the owners manual for a fuse box diagram and replace the bad fuse. If you have no manual the diagram may be marked on the fuse box or fuse box cover. Failing that just start pulling fuses and replacing them until you find a bad one. Please rate this answer, thanks.

Feb 05, 2011 | 1995 Jeep Cherokee

2 Answers

My break lights aren't working


If all of your lights inside and out arent working, then its sounds like an electrical isuue. that cost as much as $1500 dollars. But i would start with checking the fuses in your relay box under the hood. That is usually where the lights fuse is at. Some cars have two fuse boxes and a relay box, one fuse box is inside the car, one is under the hood, and the relay box is under the hood. So i would check the relay box under the hood or fuse box if you can find one. granted your brother checked them all, it sounds to me like an obvious blown fuse... good luck

Jun 06, 2010 | 2000 Mercury Sable

1 Answer

Car suddenly won't start, fuse box and under the h...


You have a bad cell in your battery. Replace the battery.

May 20, 2010 | 2007 Ford Explorer Eddie Bauer

2 Answers

I have a 1990 Chrysler New Yorker. The turn signals don't work. When I turn on the hazard lights they work. I believe it is the relay fuse for the turn signals. The one I cant find is not located in fuse...


If the lights work with the hazards, your problem is not a fuse. You need what is called a multifunction switch. It is the switch that the directional arm goes into. It can be difficult to replace,

Hope this helps

Oct 06, 2009 | 1990 Chrysler New Yorker

2 Answers

Wont start


you may be having a problem with the connections on the battery or your selenoid on you starter is goin bad

Feb 16, 2009 | 1996 Chevrolet K1500

3 Answers

Jump Started, Now More Problems


If you are lucky, it probably burnt a/or some fuses somewhere (probably higher amperage fuses, or a Maxi fuse (large fuse), or it might have burnt a fusible link (which looks like a normal wire and varies on locations depending on vehicles but is designed to melt and prevent current flow in the event of a current overload)

But, you also might have fried some electronic modules...

Aug 19, 2008 | 2004 Chevrolet TrailBlazer

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

27 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

76132 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...