Question about Pontiac Cars & Trucks

1 Answer

2007 pontiac G5 door assembly

My drivers door will not open from the inside or the outside. How do I take the door panel off of a closed door?

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Master:

    An expert who has achieved Level 3.

  • Pontiac Master
  • 496 Answers

The lock may be stuck in locked position in the latch assembly.
Roll the window down,reach inside the door and move the lock button to unlock JUST as you give the door a severe whack with a rubber hammer at the outside door edge 1/2 way down the door at the door latch area.
It may take more than one try to unlock the door,if that's what is wrong,but usually is.

Posted on May 19, 2017

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2007 Cadillac Escalade drivers door will not open from the inside or the outside


You must remove the inside trim panel and manually trip the door latch.

Feb 15, 2017 | Cadillac Cars & Trucks

1 Answer

Is there a service bulletin for a Pontiac G5 for electrical issues?


their are 7 recalls on the 07 none are for an electrical problem with lighting system
http://www.pontiacproblems.com/recalls/G5/2007 and the following tsb from march 2010 is for flickering lights
  • TSB #PIC-5073B NHTSA ID #10034409
    • Date Announced: MARCH 01 2010
    • Additional Info: How to Fix
    Summary: CHEVROLET/PONTIAC: VARIOUS ELECTRICAL CONCERNS. SIR LIGHT, IP LIGHTS FLICKER/INOPERATIVE, PARKING LAMPS FLICKER/INOPERATIVE, TAIL LAMP DIM/INOPERATIVE, TRUNK OPEN LIGHT, RADIO INOPERATIVE DOOR LOCK INOPERATIVE, NO START, NO CRANK. POSSIB
    More Information »

ELECTRICAL SYSTEM:WIRING

  • TSB #PI-0817 NHTSA ID #10047261
    • Date Announced: SEPTEMBER 01 2012
    • Additional Info: How to Fix
    Summary: CHEVROLET/PONTIAC/SATURN: ENGINE FAILS TO START AFTER ENGINE CRANKS DUE TO FUEL PUMP WIRE HARNESS CONNECTOR NEEDS REPLACING, WITHOUT REPLACING FUEL PUMP COVER ASSEMBLY (FUEL PUMP FLANGE). MODEL 2007-2010 COBALT, G5, ION. *PE
    More Information »

ELECTRICAL SYSTEM:FUSES AND CIRCUIT BREAKERS

  • TSB #PIC-4578 NHTSA ID #10022806
    • Date Announced: JUNE 01 2011
    • Additional Info: How to Fix
    Summary: EPS/STR WHEEL CONTROL FUSE (#19) OPEN. *KB UPDATED 10/04/07. *NJ UPDATED 8/7/09. *PE UPDATED 8/1/11. *PE

    More Information »
  • TSB #PIC3385 NHTSA ID #10020916
    • Date Announced: FEBRUARY 01 2008
    • Additional Info: How to Fix
    Summary: REPEATED PARK LPS FUSE OPEN. *KB (ADDITIONAL INFORMATION) UPDATED 4/1/08. *NJ
2007 Pontiac G5 Recalls CarComplaints com

Sep 21, 2015 | 2007 Pontiac G5 Gt Coupe

1 Answer

How to change inside door handle cable 2009 Pontiac g5


You'll need to take the inside door panel off , a couple of screws down in the bottom handle cup, or handle pull .Look for other screws at the bottom of the panel . may or may not have any there. There is a screw hidden in the inside of the open lever .Take a little screw driver an open the plastic tab and you will find a screw . Take a good look around the edge of the door for any other screws , if you don't see any others then you can pry , pull or get a panel tool. You what something that is not going to scratch the paint. There are push pins holding it now. I'd suggest you look at this video and some other videos on you tube. To see if you think your up to it . How To Install Replace Door Lock Actuator 2005 10 Pontiac G6 To used this just to show you how door panel comes off . No need to look any further after door panel is off. I couldn't find a video for cable replacement. That is the easy part .getting the door panel off for the first time mite seam intimidating .

Dec 27, 2014 | 2009 Pontiac G5

1 Answer

Left front door wont open from the inside


the spring in latch has broken and it wont open door try put key in lock outside and lock unlock while opening the door sometimes unjams to be able to open door without taking panel off inside with door closed if dosnt work you have to remove the panel inside replace door latch assembly

Apr 04, 2014 | 2007 Kia Sportage 4x4 V6

1 Answer

I'm trying to open the driver side rear door. After checking everything else I removed the inside panel, disconected the switches, pulled and pushed the rods in the correct manner. The door would not open....


try some house hold oil spray it on the inside off the lock.
let it for an hour to penetrade.
then make a fist and knock on the inside where the lock sits.
the panel is off so see also for child lock inside the door.

Oct 18, 2013 | Pontiac Aztek Cars & Trucks

1 Answer

Door wont open from inside


hi there,

i guess you power doors are a bit of broken or missed align. if you know how to open your car doors sidings much better. all you need is to follow the mechanism and detect what is missed align or the hinges , latch that wouldn't function. commonly that is the problem of most cars. if you don't know how to fix it. take it to the expert.

regards,
xjc

Jun 24, 2012 | 2007 Pontiac G5 Gt Coupe

2 Answers

Rear pontiac grand am door stuck


I have a 2002 pontiac grand am with both power windows and door locks. Everything else works except the lock assembly on the rear driver side rear door latch. I have removed the inside panel , aboth rods are connected. all power is disconnected to that door. I moved both of the rods correctly and the door will slightly open but that is all. How can I get it to release so I can repair or replace the latch and lock if nescessary ? I had the same problem only reversed with the frond door it would not close but after some trying I fixed that problem.

Apr 04, 2012 | Pontiac Grand Am Cars & Trucks

1 Answer

My drivers door inside handle on my 2007 pontiac torrent will not open the door. the door locks work, but the door can only be opened with the outside handle


It is likely that the linkage to the handle has come loose. You will need to remove the door panel to fix this problem.

Aug 30, 2011 | 2008 Pontiac Torrent

1 Answer

I have a 2007 Pontiac G5. There is no ticker sound when I use my blinker but the blinker in and outside of the car work, I also have no bells (when the key is in the car/the driver is not wearing a...


The problem is the wiring to the drivers side door speaker. My G5 has the same problem. If you isolate sound to that speaker you will notice the entire speaker doesn't work. Sorry but I haven't figured out how to fix it yet though.

Dec 22, 2009 | 2007 Pontiac G5 Gt Coupe

2 Answers

Where is the fuse box located 2007 G5


The floor console fuse block is located on the
passenger's side of the floor console behind the
forward panel. The panel has three clips. Pull
the panel to disconnect the three clips, and access
the fuses. Use the fuse puller to remove fuses.

Jul 07, 2009 | 2007 Pontiac G5 Gt Coupe

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

25 people viewed this question

Ask a Question

Usually answered in minutes!

Top Pontiac Experts

yadayada
yadayada

Level 3 Expert

75066 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7754 Answers

Are you a Pontiac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...