Question about Mercury Milan

Open Question

2007 Milan passenger side cv axle replacement, how do you get it out

Posted by on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

mas66
  • 104 Answers

SOURCE: CV Joint Axle Replacement

It's not an easy job, and a very messy one! If you have never done CV's before, I suggest you take it to a CV specialist, as they will do it quickly and cheaply in comparison to the hardship you will have to go through doing it yourself. These vehicles are common for the axles rusting into the hubs and siezing in there, and often the whole hub needs to be removed and the axle heated and pressed out. The new CV's often don't come with a tone wheel for the ABS system and you may need to swap the old tone wheel onto the new CV joint, and measure the alignment of it with the sensor when refitting.

Posted on Oct 21, 2008

  • 83 Answers

SOURCE: 97 toyota celica outer cv boot replacement passenger side

have you undone the main hub bolt, if yes, there could be two different items holding the cv joint on, one is a small circlip in the joint end, or the other is just like an expanding metal ring again only small. what i had to do to change my one was take the driveshaft out (easier to see whats there) then gently (rubber hammer) hit the CV joint it should then fall off to allow you to change the CV joint. I spent over an hour trying to get the metal ring off, then after taking driveshaft off it was changed and back on in ten mins. Or you can go to a motor factors or similar and get a boot puller, my opinion hammer works better lol

Posted on Jan 25, 2009

germcelchar
  • 389 Answers

SOURCE: how do i remove cv axle for a 98 isuzu trooper

Go to my profile I have just explained how to change a cv boot on a Trooper. The axle needs to be taken out to change the boot so the same solution. What you call an axle I have refered to as a drive (short for driveshaft) It takes a lot of explaining so save me a lot of writing if you read the solution I gave for changing the CV boot. Cheer's

Posted on Sep 28, 2009

don_mcleod3
  • 209 Answers

SOURCE: CV axle shaft replacement

Instructions
1.Set the vehicle transmission in "Park" and engage the emergency brake before attempting to remove the front right axle. Place wood blocks behind the rear wheels to prevent the vehicle from rolling and loosen the lug nuts one complete turn on the right front wheel with a tire tool.

2. .Lift the front passenger side of the vehicle with a floor jack and slide a jack stand under the vehicle frame near the wheel. Lower the floor jack so the vehicle is sitting on the jack stand and move the floor jack out of the way.

3. Remove the lug nuts with the tire tool and set the front passenger wheel out of the way. Take the cap off the end of the axle with a standard screwdriver and remove the cotter pin from the axle with a pair of pliers.

  • 4. Slide the crown washer off the axle and loosen the axle nut with a crescent wrench. Unfasten the top and bottom bolts that secure the brake caliper to the rotor with a socket wrench and slide the bolts out of the caliper.
  • 5. Lift the brake caliper off the rotor and remove the brake pads from the caliper. Suspend the brake caliper from the vehicle frame with a wire hanger and take the rotor off the axle.
  • 6. Unfasten the thru-bolt on the vertical sway bar with a socket wrench and remove the bolt from the sway bar. Take the channel bolt out from between the sway bar and lower A-arm that the thru-bolt ran through, and loosen the bolts that secure the front right axle to the center flange with a socket wrench and breaker bar. You may need to loosen the bolts with the breaker bar before removing them with the socket wrench.
  • 7. Slide the front right axle off the center flange and let it rest on the A-arm. Lift the front passenger side up with the floor jack to get enough room between the steering knuckle and A-arm and slide the axle out of the vehicle.
    Install in reverse order.
  • Posted on Mar 23, 2012

    kevin_getz
    • 1031 Answers

    SOURCE: 2002 Suzuki XL-7 CV Axle

    Obtain a Hayne's repair manual from AutoZone. It will give you detailed directions.

    Posted on May 01, 2012

    Add Your Answer

    Uploading: 0%

    my-video-file.mp4

    Complete. Click "Add" to insert your video. Add

    ×

    Loading...
    Loading...

    Related Questions:

    1 Answer

    95 mercury villager CV Axel replacement


    Shop around, look at labor prices( don't tell them are buying the part). Then buy your own part and have one replace the part. Fords.. When you have to replace the drives side CV axle. The left side has to come apart. The only way the drivers side axle comes out , is pushed out from the passenger side. Threw the transmission.

    Jul 29, 2016 | Mercury Cars & Trucks

    1 Answer

    How do I replace my inner axle on the passenger side of my 2002 Dodge Ram 4x4 4.7L. I lent my truck out and the C clip let go of the CV axle. The intermediate axle spline is stripped and I need to change...


    Lift and support front end on suitable jack stands preferably on frame. Remove right front cv axle, stub shaft, and seal. You will need to pull the right front brake caliper assembly loose and place to the side. Then remove bolts from shock and upper control arm and hub nut to do this. Next, remove axle lock actuator on passenger side of front axle. Place a drain pan underneath front diff cover and remove cover and drain axle. In the center of differential there will be an 8 mm head bolt holding spider gear cross-shaft. Remove bolt and cross-shaft only! Push inner axle in until clip clears inside of passenger spider gear. Set clip aside and push/pull axle shaft straight out to passenger side.

    Feb 09, 2015 | Dodge Cars & Trucks

    4 Answers

    Clicking noise down by the front tires.


    check your axles, for an open cv boot, this clicking is on straigth or turning, if turming to your rigth you hear noise to be louder on your left then your left axle is bad, do the same to your left and if noise exists then your rigth axle is bad.good luck

    Feb 27, 2011 | 2003 Dodge Caravan

    1 Answer

    We have a 2007 Hyundai Accent GS Hatchback with 125,000 miles and a front passenger side vibration that only occurs under hard acceleration between 2nd and 3rd gear. It is a standard. We have had the...


    I would say very good possiblity to be the cv shaft or cv shafts but you might try a tune up first change out the spark plugs and spark plug wires if that hasn't been done in 30,000-40,000 miles.If you have the cv axle or axles changed you will have to have it realigned again.

    Apr 23, 2010 | 2007 Hyundai Accent GS Hatchback

    3 Answers

    My front differential is leaking!


    I cannot see it, but I am guessing that you need to replace your axle seal. To do this,you have to pull your CV shaft out. Remove the tire, remove the caliper from the top of the rotor. Using a hammer on the back, remove the rotor. Take off the spindle (axle) nut, separate the axle (CV shaft) from the hub. Replace seal. It should pop right out. Good luck!

    Aug 05, 2009 | GMC Sierra 1500 Cars & Trucks

    1 Answer

    Replacing my CV Axles


    Hi, your axles on the metro are actually called half shafts, any larger name parts house can order them for you. Call them with the Make, Year, and Model and they will take care of you. you will need to tell them,drivers side or passengers side. Hope this helps!

    May 06, 2009 | 2000 Chevrolet Metro

    2 Answers

    Passenger side cv axle keeps breaking


    Contact your local parts store. Some are the same and some are different. I believe that the passenger axle shaft is longer than the drivers side.

    Apr 01, 2009 | 1988 Chrysler LeBaron

    2 Answers

    Cv axle


    Probably the wheel bering. If your going down the road and turn to the passenger side and it gets worse, its the drivers side bering and visa versa.

    Mar 22, 2009 | 1992 Toyota Corolla

    Not finding what you are looking for?
    Cars & Trucks Logo

    Related Topics:

    86 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Mercury Experts

    yadayada
    yadayada

    Level 3 Expert

    75822 Answers

    fordexpert

    Level 3 Expert

    5501 Answers

    Colin Stickland
    Colin Stickland

    Level 3 Expert

    22156 Answers

    Are you a Mercury Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...