Question about 1991 Nissan Pickup

1 Answer

1990 nissan 4 wheel drive truck

Gas gets to carb but not in it can pour gas in carb and still will not start. i have fire and no fuses are blown help please

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 61 Answers

I had a similar problem with my throttle body injected 89 pathfinder. The problem in my case was a poor ground from the injector connector. What I did to Mickey Mouse it to work is splice into the ground side of the injector connector and run a wire direct to a body ground on the firewall or the fenders. If your vehicle is fuel injected, try this. It may save you handfulls of hair and bundles of cash!
Hope this helps!

Posted on Jul 25, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

3 Answers

Engine cut off while driving down the highway why?


Fuel pump may be failing. Check fuel pressure at injector rail. If pressure is good and stays good, suspect fuel pump relay may be getting weak.

Aug 06, 2017 | Nissan Cars & Trucks

1 Answer

Need suggestions for my car not cranking. Has fire.


quite possible the fusible link has blown on the positive battery cable .

Aug 20, 2015 | 1985 Mercury Grand Marquis

1 Answer

Wont start getting gas to carb and have fire


The object on top of the intake is the throttle body. Are you getting power to the injectors, and a ground signal from the engine computer ? ?

Aug 06, 2014 | 1997 GMC Yukon

1 Answer

Amc eagle repair


Get yourself some rolls of wire and a box of connectors, a pair of wire strippers and a wire end crimping tool, and replace each wire ONE at a time. Your only other option is to take the breather that you removed from the carb to put the gas in, and go find another car that it will fit. Drive that one.

Apr 15, 2014 | 1986 AMC American Motors Eagle

1 Answer

Hard to start, no fuel to carb


If you take the fuel line off at the carb and crank the engine, does the pump push fuel out of the line ?

Apr 11, 2013 | 1984 Ford F 150

1 Answer

I have a 1993 chev 1500 Small V8 4 wheel drive after driveing for 15 min after i turn the truck off it will not start its not getting gas.Ive changed the fuel pump and filter twice and the fuel relay...


check all your GROUNDS, I can't express this enough, grounds @ tank, from top of pump, frame, check relay for fuel pump @ engine compartment, maybe on firewall ??? it may have a fuse. check all fuses, does pump HUM for (2) seconds when you turn key on ? listen for it, check all pump wiring front to back. along frame.

Mar 06, 2013 | Chevrolet Cars & Trucks

1 Answer

1990 chevy silverado fuel pump


It does seem to be a fuel problem, If your engine is fuel injected the fuel pump is in the gas tank. As far as the ground it is grounded through its harness and mounting.. First thing I would do is put a fuel gauge on the fuel rail fitting and check fuel pressures. Pump wil run for a few seconds when the key is turn ON., and then stop ( assuming its working ) A lack of pressure willindicate an inop pump, or even possibly a clog in the fuel filter. Let me know.

Mar 30, 2009 | 1990 Chevrolet C1500

1 Answer

1990 civic dx 1.5 L,turn over wont fire


best way to check this problem get your self a (noid light).you will be able to test injector operation follow directions second way if you have good pressure check fuses in panel for possible blown inj fuse,ecm,ign,

Sep 13, 2008 | 1990 Honda Civic

Not finding what you are looking for?
1991 Nissan Pickup Logo

165 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nissan Experts

yadayada
yadayada

Level 3 Expert

75807 Answers

Phil Lovisek
Phil Lovisek

Level 3 Expert

713 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22133 Answers

Are you a Nissan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...