Question about Cars & Trucks

Open Question

How to remove the egr from the manifold on a combo van 1.3 diesel 2005 reg someone must know how to do this

Posted by on

Ad

5 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
  • 1 Answer

SOURCE: removing a speed limiter from a vauxhall combo cdti van

The speed-limiter is likely to be enabled via the ECU. Removing the limiter is a five-minute job if you have access to the GM Tech 2 electronic management/diagnostic tool.

If the van is yours then there's no legal requirement for the limiter. You could just book it in at a Vauxhall dealer for the limiter to be removed. They may charge you for an hour's labour though. Still worth doing in my opinion.

Posted on Feb 13, 2009

Ad
  • 323 Answers

SOURCE: EGR Location

On the left side at the rear of the engine, and it isn't fun to change.

Posted on May 29, 2009

  • 244 Answers

SOURCE: how much oil will a ford escort van 1.8 diesel

if you have the owners manual-look in the index for oil capacity, or fluid capacities. that should inform you of the oil type and capacity (if you change the filter as well, it will prob. take another half-quart or so. the manual should inform you.
if no manual get on ford website, and search for escort 1.8L diesel van. precede with the year of model.it may inquire whether you have a/c, 4wd, etc. may need more oil, if so.
good luck!

Posted on Sep 09, 2009

Testimonial: "already looked in the manual, it only says fuel tank capacity not my oil, but yes i shall try the ford website. ive a feeling its around 5 litres."

jerry_kramer
  • 3904 Answers

SOURCE: 2005 chevy van trans pan.not enough space for pan removal. Do you have to drop the exhaust manifold?

You have to remove whatever is in the way. It may be just loosening it a bit to get some extra room.

Posted on Apr 21, 2014

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How can I sort glow plug light problem on Renault Kangoo 1.5Dci? Initially it extinguishes as it should after a few seconds. It comes on when accelerating, and if accelerating hard, seems to reduce po


Pete, if you get no code from a reader, it only means it is a physical problem and not in the system. You could possibly just have a dirty connection at one or all glow plugs power wires. This wouldn't change the mpg at all. The EGR, if faulty diaphragm, would cause a loss of power, but that's mainly on a gasoline engine. Not sure on diesel unless the EGR is in the center of the air inlet of manifold. I removed my intake on my old Chevy 6.2 diesel and replaced it with an open one from a higher performance 6.2 and it gave it much more power because now there's no air restriction because no EGR is in the intake. This stopped the excessive smoke from exhaust also. That's just MY experience, and I just LOVE diesel.

Dec 01, 2014 | 2005 Renault Kangoo

2 Answers

My 2005 town and country does not have an egr valve - but idles very rough when stopped


I had the same problem and your right no egr on 2005 town and country I have the same vehicle and the place for the egr is covered by a metal plate I also had the same exact problem with my van misfire bad idle at stop lights and after replacing every sensor there is and testing every part and injector with Ohm meter I read an article about the intake manifold plenum gasket leak can cause misfire so I bought new intake manifold plenum gasket set for only $7.99 and installed them and like magic the van ran perfect no more misfire no sluggish start from light Van is fixed finally!!!

Sep 30, 2012 | 2005 Chrysler Town & Country

2 Answers

Misfire in spark plug 2


swap the injector with another cylinder and see if the misfire follows the injector or start with a compression test

Sep 26, 2012 | 2001 Chrysler Town & Country

1 Answer

Where is the egr valve on a 2005 dodge 1500 5.7L


The electronic EGR valve and solenoid assembly (3) is attached to the front of the right cylinder head (1). An exhaust gas routing tube connects the EGR valve to the intake manifold.

2efe0f8.gif

Disconnect electrical connector (1) from EGR solenoid (2). Remove two bolts (3) connecting EGR tube (4) to valve assembly. Remove gasket located between EGR tube flange and EGR valve assembly.

Remove two mounting bolts (2). Separate valve assembly (3) from cylinder head (1). Remove and discard metal gasket located between cylinder head and valve assembly.
The new EGR valve will come with a new metal gasket. You can reuse the smaller gasket for the metal pipe going to the egr valve as long as its not damaged.

TY for using Fixya; remember rated this post.

Apr 14, 2010 | 2005 Dodge Ram 1500

2 Answers

2005 Ford F250 Deisel DTC 401 Exhust recirulaton flow insuffent


The DPFE sensor has failed on you egr system .Replace just this part and don't let someone sell you a egr valve .The sensor is about$70 and faily easy to do .:)

Sep 09, 2009 | 2005 Ford F 250 Super Duty

2 Answers

2005 Dodge 1500 code p0404 EGR valve.


The electronic EGR valve and solenoid assembly is attached to the rear of the left cylinder head ,

  1. Remove electrical connector (5) at top of EGR valve solenoid.
  2. Remove tube mounting bolt (1) at intake manifold.
  1. Remove two bolts (4) connecting EGR tube (1) to valve assembly.
  2. Remove gasket located between EGR tube flange and EGR valve assembly.
  3. Remove two EGR valve mounting bolts (5).
  4. Separate valve assembly (3) from engine.
  5. Remove and discard metal gasket located between cylinder head and valve assembly.
INSTALLATION
  1. Clean area at rear of left cylinder head where it joins base of EGR valve.
  2. Clean EGR tube where it joins EGR valve.
  3. Position new gasket between EGR valve and cylinder head.
  4. Position EGR valve to cylinder head. Install and tighten two bolts (5). Refer to Torque Specifications.
  5. Position new gasket between EGR tube flange and EGR valve assembly.
  6. Position EGR tube (1) to side of EGR valve and into intake manifold.
    1. Install EGR tube flange bolt (1) at intake manifold. Tighten bolt. Refer to Torque Specifications.
    2. Connect electrical connector (5) to top of EGR valve solenoid (2).Do a final tightening of two EGR tube bolts (4). Refer to Torque Specifications

Feb 05, 2009 | 2005 Dodge Ram 1500

3 Answers

Removing a speed limiter from a vauxhall combo cdti van


The speed-limiter is likely to be enabled via the ECU. Removing the limiter is a five-minute job if you have access to the GM Tech 2 electronic management/diagnostic tool.

If the van is yours then there's no legal requirement for the limiter. You could just book it in at a Vauxhall dealer for the limiter to be removed. They may charge you for an hour's labour though. Still worth doing in my opinion.

Jan 25, 2009 | 2005 GMC Sierra

1 Answer

Need to replace EGR valve


The exhaust gas recirculation valve is located on the intake manifold on my Isuzu. All it does is make the exhaust coming out of the tailpipe less poisonous. I'm ironiclly going to replace mine tomorrow. There should be a wiring connecter that you dissconnect and a large outgoing pipe that you need to unthread and remove. All that is holding on your EGR valve are two bolts. Remove those and the gasket and good riddance! Scrape the intake manifold with a razor blade, gently to remove the gasket completely and thread on the gasket to the new valve. Then just rebolt everything and plug in the electrical connection and start the engine. It should sound good.


Jan 12, 2009 | 2005 Chrysler Town & Country

2 Answers

2005 Golf TDI Diesel - EGR "Emissions workshop" fault light


Hi, The EGR valve itself is on a set of flexible pipework - usually stainless steel - which runs between the inlet manifold and the exhaust manifold. The EGR actuator valve is pneumatically / vacuum operated by a solenoid valve, controlled by the ECU ( aka the brane). It's not usual for the EGR valve itself to fail, more likely the solenoid valve or its electrical connector getting dirty. If you google for VAG TDI N75 valve you should get all the info you could possibly ever need :-)

Hope this helps, D.

Jul 16, 2008 | 2005 Volkswagen Golf

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

25 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

76132 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...