Question about Sterling Cars & Trucks

Open Question

Jayco Sterling Outback - Sliding doors to en suite continually breaking away and coming apart at the top .Jayco service have fixed twice but no longer fixable.Is this common and what are our options ?

Purhased Dec 2010 - second Jayco

Posted by on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 4 Answers

SOURCE: Toyota Sienna Power door - SAME THING

Here is a fix on a 1999 Sienna power door cable

Posted on Sep 17, 2009

  • 64 Answers

SOURCE: On my 2003 Odyssey the passenger side sliding

yes with little ingenuity, and a kit from your local dealer.

Posted on Apr 17, 2010

  • 118 Answers

SOURCE: 2007 dodge caravan automatic sliding doors open when keys are in pocket

Keep the keys out of your pocket. Something is touching the open switch in your pocket.

Posted on Jun 13, 2012

  • 16 Answers

SOURCE: 2006 water filter jayco sterling in kkitchen where

Usually underneath or behind the appliance, you should follow the water tubing, it will be con.ected inline

Posted on Aug 13, 2014

rconbere
  • 554 Answers

SOURCE: What steps do I have to take to replace the (sliding hide away door that covers the drink holder). This sliding hide away door is between the driver and the passenger seats on my 2005 Acura TL

I don't believe this part is available aftermarket, only from Acura. Part # 77230-SEP-A02ZA $93.17. It isn't hard to replace. First you pry up left and right chrome side trims on the console. Start at the back, they are held on with clips, be gentle but firm, don't flex the trim. A plastic trim tool helps. Once you've done 1, they are easy. Then it is just screws holding the rear section, slide both seats all the way forward to help lift out console. Go to Acura E Parts to see an exploded view.

Posted on Sep 01, 2014

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Our 25ft jayco sterling has developed a squeak in the middle of the floor. Any ideas what causes this?


loose floor fittings or failing floor support
take it to any jayco service center and have it checked out

Apr 12, 2017 | Sterling Cars & Trucks

1 Answer

2007 dodge caravan automatic sliding doors open when keys are in pocket


Keep the keys out of your pocket. Something is touching the open switch in your pocket.

Jun 13, 2012 | 2007 Dodge Caravan SXT Minivan New Cars

1 Answer

I need to take off the cover to the dome light in my 2005 subaru outback wagon. how does the cover come off so i can change the bulb? i didnt wanna try pulling it off and break it.


The bulb in our 2005 Outback dome light has been replaced twice---I found the best way to remove the cover is with a dime.

Good luck!

Jan 03, 2011 | 2005 Subaru Outback

1 Answer

97 subaru legacy outback 2.5 vibration only at idle in gear


I would suspect a mount. Either motor or trans. Also check lateral mount on top of motor to firewall. Good luck and have a great day.

Feb 10, 2010 | 1997 Subaru Legacy

2 Answers

The door chime on our 2005 Saturn Relay Van continuously goes off when you put it in gear. There are no obstructions but the automatic door switch fails to open the door sometimes and other times the chime...


I have a 2006 SV6 with the power sliding doors. The problem that I found was with the contacts on the door ( They are called plungers) the movable pins were losing connection with the fixed part The plunger is very easy to replace if you can find one. The plungers are covered with a rubber cover and is held in place with 2 plastic pins. My Pontiac dealer could not even find one in his books or even a picture of one, and claimed that he had never had anyone come with a door problem. My Chevy dealer said that it came with a wiring harness that is not needed for $154. The cure that I came up with was to take the plunger block apart (it snaps together)and replace the rusted out springs then solder 3" wires to the end of the plunger pins (they solder easy) to the tabs that go to the plug(pop out the tabs or you will melt the plastic. It took about 45 min. now the doors work like new and will never loose contact again

Oct 06, 2009 | 2005 Saturn Relay

1 Answer

Toyota Sienna Power door - SAME THING


Here is a fix on a 1999 Sienna power door cable

Jun 27, 2009 | 2004 Toyota Sienna

1 Answer

04 pontiac montana sliding doors no longer work


the sliding doors on montana assuming there power have a electrical harness on the bottom track that break and jam the doors but unlikly both have this problem do the doors lock @ unlock if not check switch at drivers door

May 27, 2009 | 2003 Pontiac Montana

1 Answer

2004 Jeep Liberty Sport


damn, i agree, is there a service bulletin posted in service dept. one better, how about a recall ?

hope2help shack

Apr 18, 2009 | 2006 Jeep Liberty

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

15 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sterling Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Gary Nitowski

Level 2 Expert

298 Answers

Are you a Sterling Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...