Question about Cars & Trucks

Open Question

Need specs on vavle adjustment on man truck tgx26480

Posted by on

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What is the piston to vavle clearance at top dead center on a 1998 chevy s10 2.2L?


The problem with this question is its not revelant to the engine so there is no spec for this . I can give you the closed valve lbs for the springs 78 lbs or open is 228lbs the valve lash is not adjustable it has hydrolic lifters the plunger travelis 0.2177thpush rod length 8.299 inchs. So i can tell you what you want to know but you need to ask me the question differantly .What do you want to know and i'll will tell you

Mar 21, 2011 | Chevrolet S 10 Cars & Trucks

1 Answer

What is the difference between hot and cold vavle clearances


When it is stated that valve clearance should be set when hot, you first adjust the clearance on the cold engine after assembly to the hot setting specs if they are the only ones given, then let the vehicle warm up to operating temperature. Then adjust the clearances again.
If it is just a tune-up(undisturbed engine), let the engine warm up to operating temperature, then adjust.
The reason is that metal expands as it heats up, which affects the valve clearance.

Dec 05, 2010 | Toyota Land Cruiser Cars & Trucks

1 Answer

We have a 1989 Chevy Scottsdale Automatic Trans. we just picked up really cheep. BUT, (there's always a but!) all the gears are working except for third. Is there a transmission mod that is external or...


if was vacuum source wont shift at all. could be vavle stucked in vavle body. can be governor vavle sticking -tv cable need adjustment -accumulator piston sticking -

Nov 20, 2010 | Chevrolet C1500 Cars & Trucks

1 Answer

I need to know the vavle adjustment on 95 dodge dakota v6 eng.


No adjustment, the rocker arms ride on a shaft and there is no adjustment

Oct 24, 2010 | 1995 Dodge Dakota

1 Answer

I need the vavle clearance on a 1995 suzuki swift


Hi, the Suzuki Swift 1.0 has hydraulic lifters (no adjustment needed). The 1.3: Inlet - 0.23 - .027 hot and Exhaust - 0.26 - 0.30 hot. The 1.3 GTI has hydraulic lifters (no adjustment needed)

Nov 04, 2009 | 1995 Suzuki Swift

1 Answer

Mercedes 124 series 230e broke timming chain and bent vavles replace vavles and skim head now car are miss firing on number one cylinder what can be the problem?


This is because of imprper timing, ask the service man to open the head and fix the timing of crank and cam proprly, there could be no other reason for that, hope this will solve the problem

Sep 08, 2009 | 1991 Mercedes-Benz E-Class

1 Answer

Not running anymore


need to loosen off on the new valve springs, sounds like thry mea be too tight to let the engine turn over.If you find TDC (TOP DEAD CENTER) per your gm spects use a feller gage to get starded in tighting down the valve springs good enough to get it running than adjust as needed to take the tapping out.

Apr 27, 2009 | 1994 Chevrolet S-10

1 Answer

What is the timing set at for a 1983 dodge 318/automatic? the sticker under the hood is gone.


Hello snowcat426a:Not knowing for sure thing like altitude or if Calif. emissions here are all the specs. 318 w/2bbl. carb. man. or auto trans. 12 @ 750 rpm. with California emissions auto or man. trans. 16@700 rpm high altitude with auto or man. trans 16@700 rpm. If equiped with a 4 bbl carb. the specs are as follows. 4 bbl.stand trans 12@750 .with automatic 16@750 rpm. With California emissions stand. transnission 16@750 rpm. Automatic specs for California emission are not available.Heavt duty specs. man trans, 8@750 rpm.auto is the same as the man. transmission specs. Should you need further help just ask. please leave rating as this helps with feedback. Thank You for using FixYa. Roger

Apr 16, 2009 | Dodge Ramcharger Cars & Trucks

1 Answer

Valve lash


  • INTAKE VALVES: 0.003-0.005 in. (0.08-0.12mm)
  • EXHAUST VALVES: 0.006-0.008 in. (0.16-0.20mm)

  • PLEASE NOTE:
  • THESE SPECS ARE FOR A 4 CYLINDER, THE V6 HAS HYDRAULIC VALVE FOLLOWERS DOES NOT REQUIRE ADJUSTMENT
  • ALL ADJUSTMENTS ARE ON A COLD ENGINE

Aug 11, 2008 | 1992 Honda Accord

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

15 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

75005 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...