Question about Oldsmobile Aurora

Open Question

I need to know the order that the push rods go on a 2000 osmoblie alura

Some push rods are shorter then the other ones I don't know how they go back in

Posted by on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
coehspprobe
  • 17 Answers

SOURCE: push rod order

when you take them out it's a good idea to keep them in a certian order that you will remember but im guessing that you didnt. its not really a big deal, just put them back in however it shouldnt hurt anything

Posted on Feb 24, 2009

Ad
daves944
  • 1050 Answers

SOURCE: push rod diagram

Found on the web, not sure what you mean about pinholes, the push rods spin freely when they are in the engine.

1d607a3.jpg

Posted on Apr 11, 2009

  • 14036 Answers

SOURCE: order for push rods 2000 olds 3400 engine

WHEN ORDER PUSH RODS YOUR INTAKE PUSH RODS LENGH 5 3/4 INCHES , THE EXHAUST PUSH RODS LENGTH 6 INCHES. YOU NEED 8 INTAKE PUSH RODS YOU NEED 8 EXHAUST PUSH RODS. YOU CAN GO TO DEALERSHIP BUY OR AUTO PARTS STORES HAVE THEM.

Posted on Sep 10, 2010

  • 3640 Answers

SOURCE: I need to know the

look at the order of the rockers arm stands. the rocker arms itself. some are higher. the longer rods go to these arms. the shorter one go to the lower arms.

Posted on Feb 14, 2011

  • 1 Answer

SOURCE: what order do push rods go in 3.4l

what order do my 2002 3.4L chevy impala push rodes go in they are not all the same length.

Kevin gwinn

Posted on Mar 18, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

On a 2000 osmoblie alura what order does the pushrodsvgobin


What engine do you have, 2.4L four cylinder? or 3.4L V6?. I assume Alura is a misspelling? This is an Alero correct?

May 17, 2017 | Cars & Trucks

1 Answer

I am replacing the head gasket on my 2000 pontiac grand am 3.4L engine. The push rods got mixed up and i need to know if the shorter rods go on the intake or exhaust side?


As you assemble things, it will become obvious as to whether you're attempting to put in a wrong length push rod. If it is wrong, it will appear that you need to adjust the rocker arm way different than it was originally to make it work. They just will not readily interchange. I think you'll do just fine.

Dec 03, 2013 | GMC Cars & Trucks

1 Answer

On the 3.1L engine in the 1999 Chevy Malibu, I need to install the intake and exhaust rocker arm and push roods.


The exhaust push rods are the shorter of the two, the intakes of course are longer. The rocker arms should have been keep in order removed but they are the same for intake and exhaust valves. Torque to the rocker arms to 13 foot pounds.

Sep 17, 2012 | Cars & Trucks

1 Answer

How do i remove lifters in 02 impala


Your push rods are different lengths. The intake push rods are the shorter ones and are marked with yellow paint. The exhaust push rods are marked with green paint. Double-check to make absolutely certain that you have them all in the correct position. (failure to do so will cause IMMEDIATE severe engine damage when the starter is cranked.)

Other than that, it is common for the lifters to leak down when the engine has been disassembled. I have even had several that made it very hard to start and "clattered" for like 5 minutes after starting the engine. It will be OK when the lifters pump back up.

Apr 23, 2012 | Cars & Trucks

1 Answer

98 oldsmobile achieva front head push rod order


You are thinking too hard.

It is VERY simple. The Intake valve push rods (marked with ORANGE paint) are shorter than the exhaust valve push rods (marked with BLUE paint) If you cannot see the paint, you can always stand them up next to each other...it is pretty obvious which ones are which.

BOTH heads are EXACTLY the same - they are interchangeable. It is just that one is turned one way and the other is turned the other way so the exhaust and intake ports will be on the correct sides. (intake port towards the center of engine, exhaust port to the outboard sides of the engine.) You do not need to go searching the internet for some "order". All you have to do is LOOK AT THE HEAD to tell which valve is intake and which valve is exhaust.

So then it is as simple as: Put the short push rods on the intake and the long push rods on the exhaust....

Apr 21, 2012 | 1998 Oldsmobile Achieva

1 Answer

I need to know the push rod order for a 2001 Chevy malibu V6


look at the order of the rockers arm stands. the rocker arms itself. some are higher. the longer rods go to these arms. the shorter one go to the lower arms.

Jan 17, 2011 | 2001 Chevrolet Malibu

1 Answer

Order for push rods 2000 olds 3400 engine


WHEN ORDER PUSH RODS YOUR INTAKE PUSH RODS LENGH 5 3/4 INCHES , THE EXHAUST PUSH RODS LENGTH 6 INCHES. YOU NEED 8 INTAKE PUSH RODS YOU NEED 8 EXHAUST PUSH RODS. YOU CAN GO TO DEALERSHIP BUY OR AUTO PARTS STORES HAVE THEM.

Sep 10, 2010 | 1999 Oldsmobile Alero

1 Answer

Which order do the push rods go in for 1999 chevorelet venture , i know there are the intake and exhaust pushrods , but they got mixed up when laid out


Well check them and see if there the same ,,
If they are then it dosent make any differance were they go but if they are not the same then check the rockers and you might find the rockers on inlet are shorter than the exhaust,
Put in the holes push down to cam follower and rest against rocker and it should rest about were the cup on push rod Sits.

Oct 02, 2009 | 1999 Chevrolet Venture

1 Answer

We replaced intake gaskets and now its making a loud knocking sound


Good day
which intake gasket need you replace upper or lower, did you remove the push rods if so did you put the right ones in the right place. intake push rod will be marked orange and are shorter, exhaust push rods are marked blue. it almost sounds like you might have put an exhaust into a intake.
hope this helps please let me know if this is not the case and we can go from there

Cheers

Jul 10, 2009 | 1998 Chevrolet Lumina

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

18 people viewed this question

Ask a Question

Usually answered in minutes!

Top Oldsmobile Experts

yadayada
yadayada

Level 3 Expert

76109 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8270 Answers

Are you an Oldsmobile Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...