Question about Cars & Trucks

Open Question

Five ways in which sports personalities challenges can be addressed to the media

Posted by on

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Keyless entery keypad how to reset


Each vehicle equipped with a keyless entry keypad is programmed with a five-digit entry code. This code is provided to the customer through a wallet card in the owner literature package. In addition, this code is available through a diagnostic tool and is also printed on the vehicle security module label. When entering codes each digit mst be entered within five seconds of the previous button press.

Do you know the original five-digit code ? You need the original to reset with a new one .

Programming/Erasing Personal Code
A unique personal five-digit code can be programmed by following these steps:
  1. Enter the factory set five-digit code (the keypad will illuminate when pressed).
  1. Press 1/2 within five seconds of Step 1.
  1. Enter the unique five-digit code.
The personal code does not substitute for the permanent factory set code. Either code can be used to access the vehicle. In addition, if a second personal code is programmed, it overwrites the previous personal code. To erase a personal code, carry out the following procedure:
  1. Enter factory set five-digit code.
  1. Press 1/2 within five seconds of Step 1.
  1. Press 7/8 and 9/0 at the same time within five seconds of Step 2.
The system now responds only to the factory set code.
If you do not know the code ,it is located on the vehicle security module located under the dash some where or in the trunk . Sorry I can't be more specific ,my service info doesn't show sable .

Feb 17, 2016 | 2003 Mercury Sable

2 Answers

Replace transmission control switch on mitsubishi challenger


Montero or Challenger? Both on the drivers side of the transmission. Big black switch under where the shifter cable goes to the transmission. Under the vehicle.

Feb 11, 2015 | 2004 Mitsubishi Montero Sport

1 Answer

Mitsubishi challenger pinout diagram for instrument cluster


No chance the manfacturers do not release this sort of information or the ECU pins only to the dealers .

Feb 11, 2012 | 1996 Mitsubishi Montero Sport

1 Answer

Keypad instructions for entry - need instructions to change combination


Programming/Erasing Personal Code
A unique personal five-digit code can be programmed by following these steps:
  1. Enter the factory set five-digit code (the keypad will illuminate when pressed).
  1. Press 1/2 within five seconds of Step 1.
  1. Enter the unique five-digit code.
The personal code does not substitute for the permanent factory set code. Either code can be used to access the vehicle. In addition, if a second personal code is programmed, it overwrites the previous personal code. To erase a personal code, carry out the following procedure:
  1. Enter factory set five-digit code.
  1. Press 1/2 within five seconds of Step 1.
  1. Press 7/8 and 9/0 at the same time within five seconds of Step 2.
The system now responds only to the factory set code

Mar 06, 2011 | 2003 Mercury Mountaineer

1 Answer

How to reset code on door


Erasing personal code1. Enter the factory-set code.


2. Press 1/2 within five seconds of


step 1.


3. Press the 7/8 and 9/0 controls at


the same time within five seconds of


step 2.


The system will now only respond


to the factory-set code.

Programming your own personal entry code1. Enter the factory-set code (keypad will illuminate when pressed).


2. Press the 1/2 control within five


seconds of step 1.


3. Enter your personal 5 digit code.


Enter each digit within five seconds


of the previous one.

Your personal code does not replace the permanent code that the


dealership gave you. You can use either code to unlock your vehicle. If a


second personal code is entered, the module will erase the first personal


code in favor of the new code.

Oct 08, 2010 | 2001 Ford Explorer Sport

1 Answer

How do I change the code for key less entery on the key pad on door


Programming a personal entry code The factory set code cannot be reprogrammed but you can create your own 5 digit personal entry code. When pressing the controls on the keypad, press the middle of the controls to ensure a good activation.
Up to three personal entry codes may be programmed to the vehicle. To create your own personal entry code:

  • 1. Enter the factory set code.
  • 2. Within five seconds press the 1-2 on the keypad.
  • 3. Enter your personal 5-digit code. Each number must be entered within five seconds of each other.
  • 4. Press 1-2, 3-4 or 5-6 to indicate which of the three personal entry code positions you wish to use.
  • 5. The doors will again lock then unlock to confirm that your personal key code has been programmed to the module.
Tips:

  • Do not set a code that uses five of the same number.
  • Do not use five numbers in sequential order.
  • The factory set code will work even if you have set your own personal code.
  • If you program a code to a position that already contains a set code, the previously-set code will be erased.

Erasing personal code
  • 1. Enter the factory set 5 digit code.
  • 2. Within five seconds, press the 1-2 on the keypad and release.
  • 3. Press and hold the 1- 2 for two seconds. This must be done within five seconds of completing Step 2.
All personal codes are now erased and only the factory set 5 digit code will work.

Good luck (remember commend and rated this).

May 03, 2010 | 1996 Ford Explorer

2 Answers

Need radio 'code' for 2000 montero sport with factory cd player


From Mitsubishi's site FAQ's

I need a radio code for my vehicle. How do I get this?
You will need to speak to your Dealer who can organise this on your behalf. You will be required to submit your details and proof of ownership.

By law FixYa can not provide this information.

Apr 03, 2010 | 2000 Mitsubishi Montero Sport

1 Answer

HOW DO I RESET MY DOOR CODES FOR MY 1996 GRAND MARQUIS


Up to three personal entry codes may be programmed to the vehicle. To create your own personal entry code:

  • 1. Enter the factory set code.
  • 2. Within five seconds press the 1 � 2 on the keypad.
  • 3. Enter your personal 5-digit code. Each number must be entered within five seconds of each other.
  • 4. Press 1 � 2, 3 � 4 or 5 � 6 to indicate which of the three personal entry code positions you wish to use.
  • 5. The doors will again lock then unlock to confirm that your personal key code has been programmed to the module.
Tips:

  • Do not set a code that uses five of the same number.
  • Do not use five numbers in sequential order.
  • The factory set code will work even if you have set your own personal code.
  • If you program a code to a position that already contains a set code, the previously-set code will be erased.

Erasing personal code
  • 1. Enter the factory set 5�digit code.
  • 2. Within five seconds, press the 1 � 2 on the keypad and release.
  • 3. Press and hold the 1 � 2 for two seconds. This must be done within five seconds of completing Step 2.
All personal codes are now erased and only the factory set 5�digit code will work.

Feb 17, 2010 | 1996 Mercury Grand Marquis

1 Answer

Keyless entry on door 2003 ford f-150


this is from the Ford owners manual.
Programming a personal entry code
To create your own personal entry code:
1. Enter the factory set code.
2. Within five seconds press the 1 • 2 on the keypad.
3. Enter your personal 5-digit code. Each number must be entered
within five seconds of each other.
4. The doors will again lock then unlock to confirm that your personal
keycode has been programmed to the module.
Tips:
• Do not set a code that uses five of the same number.
• Do not use five numbers in sequential order.
• The factory set code will work even if you have set your own personal
code.
• If you set a second personal code it will erase your first personal code.

Mar 30, 2009 | 2003 Ford F150 Regular Cab

3 Answers

Keyless entry


I believe dealer has to re-program the new code.

Aug 29, 2008 | 2001 Ford Explorer Sport Trac

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

12 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

76132 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...