Question about Cars & Trucks

Open Question

A code for multiple misfires and something to do with the primary side of the coil?

Posted by on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

scott586
  • 41 Answers

SOURCE: 1999 Pontiac Firebird multiple misfire

It could be a clogged fuel filter, bad gas. Or if you have done alot of modifications to it, the injectors may not be able to keep up.

Posted on Apr 21, 2009

  • 41 Answers

SOURCE: multiple misfire 95 monte carlo 3.1 liter

check codes first. But sounds like crank position sensor mine does it all the time

Posted on Apr 25, 2009

  • 400 Answers

SOURCE: engine misfire code multiple cylinders, starts

There are quite a few things that can cause this.
Check your fuel pressure to start. 55 psi key on is good.
Also make sure it dosen't fall back down should hold at that psi with out engine running.
Aslo the intake's like to leak air around the gaskits which will cause a miss fire.
Aslo the mass air flow.

Posted on Jun 22, 2009

  • 144 Answers

SOURCE: 2004 Audi A4 misfire

it is always a good idea to stay with o.e.m parts and yes there is updated parts in the newer coils. and yes the M.A.F will also cause misfire faults but will not make check engine light flash or make car shake and shudder. also check you wire harness going to your coils make sure your ground wires are not cracked. That could be the main culprate. good luck hope this helps

Posted on Sep 03, 2009

wireguy212
  • 1627 Answers

SOURCE: get multiple misfire codes. P0300 - P0303. If this

This could be a coil problem but i would start by changeing the plug wires and checking each plug.

Posted on Nov 17, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Toyota camry with codes obd codes p0300 - p0306 and p0354?


The car needs carlibration,the code means random cylinder misfire.fuel line need and MAF need check

Sep 05, 2014 | 2007 Toyota Camry

1 Answer

2007 Mercury Milan Premier V6 Misfiring


P0300 - Random multiple cylinder misfire
P0301 , 302 and 304 - Cyliners 1, 2 and 4 misfire
P0351 - Ignition coil A primary/secondary circuit malfunction
P0354 - Ignition coil D primary/secondary circuit malfunction

Nov 07, 2013 | Mercury Milan Cars & Trucks

1 Answer

2003 lincoln navegator with code po300-po355 what that means?


p0300 is usually a random multiple misfire and p0355 is an Ignition Coil E Primary. The P0300 code is triggered because of the P0355 code. Go to Cylinder 5, 1st-Replace the coil, 2nd-Replace the plug, 3rd-Check compression

Jan 28, 2011 | 2003 Lincoln Navigator

2 Answers

What P0300, P0305, P0306 and P0351 codes means?


HI. The codes and their respective definitions are below.


P0300 - Random/Multiple Cylinder Misfire Detected
P0305 - Cylinder #5 Misfire Detected
P0351 - Ignition Coil A Primary/Secondary Circuit Malfunction
P0306 - Cylinder #6 Misfire Detected

Aug 29, 2010 | 1997 Jeep Grand Cherokee

1 Answer

I got several error codes on my 07 Toyota Avalon, codes P0352,P0300 and P0301-P0306. Does any one one know what could be causing it or how to repair it.


p0352
Ignition coil B primary or secondary circuit malfunction
p0300
Random/multiple cylinder misfire detected
p03001
cylinder no.1 misfire detected
p0306
cylinder no.6 misfire detected
check you coils and spark plugs
make sure they are in good shape. check you spark plug wires also.

Aug 26, 2010 | 2007 Toyota Avalon

1 Answer

Multiple cylinder misfire


There could be a couple of reasons for this. If you are getting multiple misfires then usually it has something to due with the plugs going bad. It also depends on how many miles you have on the plugs and the wires. The other problem could be with the ignition coils or the ignition module.

Apr 10, 2010 | 2007 Hyundai Sonata Limited Sedan

2 Answers

Does anyone know what the code po316 is on the ford escape v6? there is also po300b,po303,po304b,po357and po353 codes


P0316 .... Engine Misfire Detected on Start-up (first 1000 Revolutions)

P0300b .. Random/Multiple Cylinder Misfire Detected

P0304b .. Cylinder 4 Misfire Detected

P0357 .. Ignition Coil G Primary/Secondary Circuit

P0353 .. Ignition Coil C Primary/Secondary Circuit

From codes you need new spark plus, Ignition Wires, and ignition coils

Feb 07, 2010 | 2005 Ford Escape

1 Answer

I have 1996 Dodge Gran Caravan, and it gives me these codes: 27 and 43, what do they mean??


CODE 27 - Injector Control Circuit, output driver does not respond properly to the control signal

Code 27 MIL light options: OBDII
P0201 - Injector #1 Control Circuit
P0202 - Injector #2 Control Circuit
P0203 - Injector #3 Control Circuit
P0204 - Injector #4 Control Circuit
P0205 - Injector #5 Control Circuit
P0206 - Injector #6 Control Circuit

CODE 43 - Cylinder Misfire, or Ignition Primary Circuit

CODE $# MIL options: OBDII
P0300 - Multiple Cylinder Misfire
P0301 - Cylinder #1 Misfire
P0302 - Cylinder #2 Misfire
P0303 - Cylinder #3 Misfire
P0304 - Cylinder #4 Misfire
P0305 - Cylinder #5 Misfire
P0306 - Cylinder #6 Misfire
P0351 - Ignition Coil #1 Primary Circuit
P0352 - Ignition Coil #2 Primary Circuit
P0353 - Ignition Coil #3 Primary Circuit

Feb 03, 2010 | 1996 Dodge Caravan

1 Answer

My engine light is on and the code machine is saying multiple miss fire, and i have just had a recent tune up.


Multiple misfire is determined by the O2 sensors. misfire can be the result of spark not reaching the cylinder from the coil (due to bad plugs/wires), or it can be the result of the coil not initiating the spark or not being told to initiate a spark by its inputs. if the tune up did include plugs and wires and was done without damaging any new components (broken plug during install, separated wire from connector inside boot, etc.), then perhaps the source of the misfire is in the primary ignition components (coil pack, crank sensor, ECM, etc.). Recommend wiggle each wire near the plug to ensure there is no broken plug or broken wire connector. This is more reliable if done while the engine is running, but know that if there is an arc somewhere in the secondary ignition it very well may shock your fingers (this is not dangerous, but better to be prepared than surprised by it)

Sep 29, 2009 | 2005 Chevrolet Silverado

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

19 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...