Question about Mini Cars & Trucks
Check the wires under the seats to the passenger sensing devices. I believe Mini had a recall on this for some model years. You will need a SRS reader or the dealer to reset the airbag light after you fix the problem.
Posted on Jun 02, 2017
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
Make sure that the microswitches in the rear trunk are all depressed. There is one where the parcel shelf (the cover that covers the view of the trunk from the outside) sits on the left that is usually the problem make sure that it is sitting on the microswitch (pull down on the closest side to you so it pivots forward and sits on the microswitch. Then make sure that the latch on the left side (drivers side) of the rear that allows easier access to the trunk switches the microswitch there. now close the trunk and try the conv top. the parcel shelf, the rear access latch and i think the trunk switches need to be depressed for the top to work. I know at least the first two.
Posted on Feb 27, 2009
ECU - take it to a dealer for diagnostic and reset/repair
Posted on Jan 12, 2010
Testimonial: "Many thanks. Have had put on a machine at BMW and a local garage and it is not coming up with any error codes. Trying again on friday with dealer."
When the airbag light (SRS) is on or blinks it means a fault has occurred in the system and the airbag diagnostic monitor has disabled the system, the most common problem that turns the light on is a break in the connection to the steering wheel mounted airbag, this is due to a rotating ribbon contact that breaks under the steering wheel that connects the airbag to the wiring harness and the diagnostic monitor, the part is called the clock spring contact, a coiled up ribbon electrical contact that turns with the steering wheel while maintaining a mechanical connection to the airgag mounted on the steering wheel, to replace this part you must disarm the airbag system and remove the steering wheel, this requires a special steering wheel puller tool and that you disarm the airbag system before you start the work, to do this disconnect the battery negative cable for 1 hour prior.
Posted on Mar 22, 2010
Go to your local auto electrician, who will plug in scanner
This will locate fault and tell him if a sensor is damaged or just needs reset
Posted on Apr 28, 2010
Tips for a great answer:
Jan 13, 2012 | 2007 Mini Cooper S Convertible
Oct 25, 2011 | 2004 Ford Escape
Apr 28, 2010 | 2005 Mini Cooper
Mar 12, 2010 | 2005 Mini Cooper
Jan 26, 2010 | 2002 Mini Cooper
Jan 12, 2010 | 2003 Mini Cooper
Jan 23, 2009 | 2005 Mini Cooper
Jul 10, 2008 | 2003 Mini Cooper
Apr 27, 2018 | Mini Cars & Trucks
86 people viewed this question
Usually answered in minutes!