Question about Daihatsu Cars & Trucks

Open Question

What is the valve clearance for the daihatsu Mira 1986 carborator

Posted by on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

SOURCE: I am rebuilding 3cyl diesel

you will need a manual for this as diesel torque settings are different to that of a petrol engine.

Posted on Jul 18, 2008

Benimur
  • 6966 Answers

SOURCE: Daihatsu Mira 3 cyl 660cc No

Hi,

In my past dealings with these 3 cylinder engines, common faults (depending on the engine) are:

  • contact point pitting/burns (clean, scrape/replace);
  • rotor;
  • distributor cap;
  • ignition coil;
  • ignition coil ignition B+12 connector;
  • ignition coil loose ground.
Please check above mentioned components.

Hope this be of initial help/idea. Pls post back how things turned up or should you need additional information.

Good luck and kind regards. Thank you for using FixYa.

Posted on Aug 04, 2008

  • 98 Answers

SOURCE: how to rebuilt the cylinder head of daihatsu charade 3 cylinder engine

Which motor?

Posted on Sep 04, 2008

  • 1 Answer

SOURCE: daihatsu mira

I have a 1992 daihatsu mira the fan will on turn on if I have the air con on is that correct. So if its over heating I need to turn the air con on to turn the fan on!

Posted on Jul 13, 2009

  • 1 Answer

SOURCE: 1994 Daihatsu Mira L200 repair Manual

how to overhaul mira l2 gear box??

Posted on Feb 24, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Need valve specification on 86 chevy nova


from my 1985/1986 official shop manual:
figure 6A1-39 valve stem and guide clearance
max intake clearance 0.08 mm (0.0031 in)
max exhaust clearance 0.10 mm (0.0039 in)
pg 6A1-17 If clearance is greater than the values given in 6A1-39, then replace the valve and guide

pg 6A1-17
standard overall length
intake 106.88 mm (4.2079 in)
exhaust 106/78 mm (4.2039 in)
do not grind more than 0.5 mm (0.020 in)

Mar 11, 2015 | 1986 Chevrolet Nova

1 Answer

Whats the valve clearance for my Diahatsu Mira 1998 850cc?


Mira 847 cc 1993- Engine Code ED 10
Ignition data
  • Ignition system type: El-ecu
  • Ignition coil make/type: Dia/-
  • Supply voltage: 12 + Volts with ballast resistor
  • Primary resistance: 1.35-1.65 Ohms
  • Secondary resistance: 22000-30000 Ohms
  • Distributor make/type: Den/-
  • Contact breaker gap/air: 0.2-0.4 mm
  • Dwell angle: Deg\par Ignition Timing - unleaded: 5 2/900 Deg eng/rpm (without vacuum)
  • Ignition Timing - leaded: Deg eng/rpm (without vacuum)
  • Timing mark location: Flywheel
  • No 1 plug location: Pulley
  • Firing Order: 1-2-3
  • Spark plug make: Bosch
  • Spark plug type: WR6DC
  • Electrode gap: 0.7-0.8 mm
Fuel System
  • Fuel type: U/L
  • Fuel pump type/pressure: bar
  • Engine idle speed: 900+100/-50 rpm
  • Fast idle speed: 2000 rpm
  • CO level at idle speed: 1.0
  • 0.5 Vol %
Engine Data
  • Valve clearance - inlet: 0.25 mm (hot)
  • Valve clearance - exhaust: 0.30 (hot)
  • Compression pressure: 1.2-1.5 bar
  • Oil pressure: 2.5-5.6/3000 bar/eng/rpm
  • Radiator pressure cap: 0.6-1.05 bar/type
  • Drive belt 1 - size: 9.5x925/KDB 925 mm/type
  • Drive belt 2 - size: mm/type
Electrical System
  • Alternator output: 10/2500 Amps/eng/rpm
  • Regulated output: 14.2-14.8 Volts
  • Battery: 12/35 V/Ah
  • Starter motor make/type: Den/-
Other data
  • Clutch operation type: Cable
  • Clutch adjustment: 10-30 mm
  • Cambelt failure: Damage
  • Cambelt Part Number: 13514-87211
  • Tyre pressures: 1.8(26)f 1.8(26)r bar (psi)
  • it took me 3 seconds to google this then i realized that this is a older engine then yours

Oct 30, 2014 | 1996 Daihatsu Mira

1 Answer

Valve clearance setting sequence


Hi Chris, send me your email at rheinhardg@gmail.com. I will send you a manual to help you.

Regards
Rheinhard

PS. I tried to add the solution here, but it keeps telling me "Please use English Characters only.

Jan 14, 2014 | 1988 Daihatsu Charade

1 Answer

I hav a 1986 mazda B2000, what is the valve clearance pls?


the valve clearance for a 1986 mazda B2000 is, Intake and exhaust valves are .012 inches (.30mm).... Hope this is helpful, have a good day

Mar 18, 2011 | Mazda B2200 Cars & Trucks

1 Answer

Dashlights faulty


Go to WARFS.ORG and look for the daihatsu help link Leon is the US rep for them and knows more about them than anyone on the planet.I hope this helps, good luck !!

May 12, 2010 | 1992 Daihatsu Charade

2 Answers

1994 Daihatsu Mira L200 repair Manual


how to overhaul mira l2 gear box??

Apr 17, 2009 | 1992 Daihatsu Charade

1 Answer

I am rebuilding 3cyl diesel daihatsu engine from a 1990 charade cs and require the head torque and valve clearance


you will need a manual for this as diesel torque settings are different to that of a petrol engine.

Jul 17, 2008 | Daihatsu Charade Cars & Trucks

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

12 people viewed this question

Ask a Question

Usually answered in minutes!

Top Daihatsu Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

yadayada
yadayada

Level 3 Expert

75117 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

4514 Answers

Are you a Daihatsu Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...