Question about Cars & Trucks

1 Answer

Replacing the o rings in the faucet arm. Is there a video with instructions

It is leaking from the trim at the base

Posted by on


1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Cars & Trucks Master
  • 807 Answers

These faucets are cheap enough to just replace. don't risk a flood trying to repair it

Posted on May 17, 2017


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

2 Answers

What causes P0170 code

Many things can cause this. O2 sensor, vacuum leaks, wiring,and more. It needs to go on a scanner to isolate the problem. It could be $3.00 worth of vacuum hose or several hundred dollars for gasket replacement.

May 19, 2015 | 2008 Hyundai Elantra

1 Answer

Oil in spark park plugs

You have leaking spark plug grommet/seals under the valve cover, and most likely being a 91, also have leaking cam tower o-rings. The first is just a matter of replacing the valve cover gasket set. The second requires removal of the cam tower/rocker arm shaft assy. to access the o-ring seals between them and the head. If you are not an experience mechanic, I do not recommend doing this yourself. It is easy to damage parts and bend valves if you don't seat it properly.

Mar 14, 2014 | 1991 Honda Accord

1 Answer

I would like to see a how to video on the removal of the headliner on a 1987 Chrysler Lebaron

I've seen trim tools on Amazon. You never know what's available on You-tube for show and tell. Maybe check Instructables, a cool site.

Nov 24, 2013 | 1987 Chrysler LeBaron

1 Answer

How do i replace the wiper arm-not the blade and what tools do i need?

U need a socket or a wrench, 13mm i think, then just follow these instructions

  • Grab the trim cover over the base of the wiper arm with your thumb and forefinger and pull it upward to expose the wiper stud and nut.

  • 2

    Remove the nut from the wiper stud with your socket set.

  • 3

    Grab the wiper arm where it slips over the wiper stud with one hand and pull straight up to remove the old wiper arm. Discard the old arm.

  • 4

    Align the splines in the new arm with the splines in the wiper stud, making sure the wiper arm aligns properly in conjunction with the windshield, and push the arm down onto the wiper stud by hand.

  • 5

    Thread the nut back onto the wiper stud and tighten it down with the socket set. Push the trim cover over the stud and nut until it clicks into position.

  • Oct 20, 2010 | 1994 Ford Explorer Limited

    1 Answer

    Fuel injectors keep leaking at base of electric plug have changed all injectors 2 times now front of rail by where vaccuum line conects 1990 jeep cherokee laredo 4.0L

    When replacing injectors, there are small o-rings on bottom. Make sure that o-rings are still on base of injector before installing.

    Feb 15, 2010 | 1990 Jeep Cherokee Limited

    1 Answer

    How do you remove the windshield wipers at the base Trying to fix the connecting rod that takes the drive from the wiper motor to the arms. To do this you need to remove a piece of trim which won't come...

    the lock releases when the arms are pulled away from windshield then you can pry the arm off the post use a towel under the screwdriver to keep from scratching paint.

    Oct 17, 2009 | 1993 Dodge Dakota

    2 Answers

    1993 Cherokee Sport oil leak at spark plugs

    Reseal the valve cover. Don't use a gasket, use RTV sealer for the best results.

    Apr 27, 2009 | 1992 Jeep Cherokee Sport

    1 Answer

    Replace a window regulator in a 1994 ford explorer

    wow, a lot of work to do.

    Window Regulator, Front Door, Explorer Removal
    1. Remove front door trim panel and front door trim shield . Refer to Section 01-05B .
    1. Remove inside door belt weatherstrip and glass stabilizer.
    1. Remove front door window glass as described in this section.
    1. Remove two nut and washer assemblies attaching the equalizer bracket.
    1. Remove three rivets (manual) or four rivets (power) attaching the regulator base plate to front door trim panel finish panel (23712) .
    1. Remove window regulator electric drive and front door window channel bracket from vehicle.
    1. Working on a bench, carefully bend tab flat to remove arm slides from front door window channel bracket .
    1. Install new window regulator electric drive arm plastic guides into front door window channel bracket and bend tab back to 90 degrees. Use care not to break tab; if tab is cracked or broken, replace front door window channel bracket . Make sure rubber bumper is installed properly on new front door window channel bracket , if replacement is made.


    NOTE: The front door window channel bracket and window regulator electric drive are installed into the vehicle as one assembly. The front door window channel bracket may be disassembled from the window regulator electric drive as described in Steps 7 and 8 of Window Regulator, Removal.
    1. Install front door trim panel finish panel with preassembled glass bracket into vehicle. Set the regulator base plate to window regulator electric drive using base plate locator tab as a guide.
    1. Install three (manual) or four (power) rivets (385189-S100) to attach regulator to front door trim panel finish panel . Two 1/4-20 x 1-inch bolts and two 1/4-20 nut and washer assemblies may be used as alternates for glass retention. However, torque must not exceed 4-7 Nm (3-5 ft-lb). Equivalent metric retainers may be used.
    1. Install equalizer bracket.
    1. Install inside door belt weatherstrip and glass stabilizer.
    1. Lower regulator arms to access holes in front door trim panel finish panel . Install front door window glass as outlined.
    1. Adjust glass to ensure proper alignment with glass run. Cycle glass for smooth operation.
    1. Install front door trim panel and front door trim shield . Refer to Section 01-05B .

    Apr 11, 2009 | 1994 Ford Explorer Limited

    2 Answers

    Driver side wiper wont work

    One side does not work? Can you move the arm with your hands? If so, look for a loose nut that holds the wiper arm on. Remove the plastic trim on the wiper arm base, and tighten the 12 millimeter bolt. Please advise if this helps.

    Dec 22, 2008 | 2003 Toyota Highlander

    1 Answer

    '86 F250 wiper arm windshield trim removal

    lift arms off windshield there should be a little *** on side that pulls out. / if not there should be small holes near base. slide a pick or small allen through holes when arm is lifted off windshield. with ***/pick in place( wipers shouldn't be touching windshield) arms will wiggle right off

    Nov 22, 2008 | 2000 Ford F250 Super Duty Crew Cabs

    Not finding what you are looking for?
    Cars & Trucks Logo

    Related Topics:

    14 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Cars & Trucks Experts


    Level 3 Expert

    77932 Answers

    Colin Stickland
    Colin Stickland

    Level 3 Expert

    22306 Answers

    Thomas Perkins
    Thomas Perkins

    Level 3 Expert

    14403 Answers

    Are you a Car and Truck Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides