Question about Ford Cars & Trucks

Open Question

Fan belt replacement on a 1963 ford 2000, 4 cylinder gas converted to 12 volt

Posted by on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
chrischronic
  • 235 Answers

SOURCE: Fuel pump not working properly getting gas to engine.

change the fuel pump relay.

Posted on Jan 15, 2009

Ad
fixyathing
  • 341 Answers

SOURCE: I have a 39 ford 6 volt battery operated car. I

you need a voltage doubler circuit which feeds from your 6V DC system and converts it to AC and steps it up and converts it to 12V DC. This device might be difficult to find. OR use a 6Vdc power inverter and just use a 120volt AC fan if much easier to source out in your area.
You might want to try a 12VDC high speed fan and see if the 50% reduced speed is already sufficient for you.

Posted on Aug 30, 2009

bschilz
  • 2049 Answers

SOURCE: replace serpentine belt on 2000 ford focus

Here is a link to the diagram you will need to put the new belt on...

http://www.gates.com/common/part_locator/view_diagram.cfm?id=S7002

Here is a link to a video which will show you how to replace the serpentine belt...

http://www.wonderhowto.com/how-to/video/how-to-inspect-and-replace-your-car-s-serpentine-belt-267229/

Posted on Oct 03, 2009

Testimonial: "This was a great help. Thanks for the info bsci"

  • 1810 Answers

SOURCE: THERE IS A CRACK JUST BEFORE WHERE A 12

quit yelling bad bad bad

Posted on Mar 23, 2010

reisdos
  • 1297 Answers

SOURCE: Fan belt broke on my son's 2000 Chev Malibu -

yes... easy

you should have one belt called a serpentine

here is the 3.1 routing
e88cb98.gif

here's the 3.8 routing
fade3e8.gif

Posted on May 15, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2000 ford explorer A C & heater fan won't blow at


Use a jumper wire and jump 12 volts to the blower moter and see if it comes on, make sure that you have a good ground. If the motor does not come on then it is going to be the blower motor.. hope that helps mmkayyyy

Sep 15, 2013 | Cars & Trucks

1 Answer

2000 dodge grand caravan 3.3 what is the coil voltage in the cooling fan relay? 5 volts, 8 volts, 12 volts.


The cooling fan relay draws 12 volt power through 40A fuse 106 in the power distribution center

Apr 10, 2013 | 2000 Dodge Grand Caravan

1 Answer

1994 mustang v6 started running real rough and is now almost dieing when I press the gas I have cleaned.


Many times the plugs and wires are cancelled out with the coil pak.
change all of them, you will be glad you did.
The ignition coil pack is a crucial part of your ignition system. It's function is to convert the 12 volt power of your vehicle's electrical system in to 35,000 or more volts. This produces a high intensity spark at the spark plug which then ignites the fuel in the cylinder. Coils in general will wear out over time and cause a misfire condition. In engines like this that use a coil pack, if one coil goes bad, the complete assembly needs to be replaced. PLEZE LET ME KNOW. there isn't anything else.


  • HOLLANDER #: 610-00133
  • OE #: 919F-12029-AA

Sep 17, 2012 | 1994 Ford Mustang

1 Answer

Ford Focus - 12 years old, broke timing belt. The garage is saying I need a complete new cylinder head. I suspected it was the timing belt and expected several bent valves at worst. My question is...


Here at my repair shop have never had to replace a cylinder head, due to timing belt failure, just replace bent valve's and machine head.

Nov 11, 2010 | 2000 Ford Focus

1 Answer

Hi, i have a triumph spitfire 4 1963 have recently converted it from pos ground to neg ground ,fitted alternator new plugs points condenser ,coil, car runs for aprox 3 miles then splutters to a halt ,after...


It sounds like you have to fit a ballast resistor in the power supply to the coil or get a 12 volt coil. Later spits (-ve earth) used a 9 volt coil with a resistor to drop the battery volts down when running, when starting the full volts are used but the starter will drop this to 9 or 10 anyway, this helped cold starts.)

Jul 07, 2010 | 2006 Triumph Tr 7

1 Answer

2000 Ford Taurus, V6, auto trans, new thermostat installed, still over heating, not sure if cooling fans are starting. Checked all fuses. Any ideas?


first i would check the cooling fan relays, when the temp gauge gets anywhere between over half and overheating you should hear the relays switch(it will make a clicking sound). but do not let the car overheat! Secondly the fans are controlled by the cooling fan temp switch/sender, this is located on the radiator, and you should check to see if the fan is getting power by using a volt-meter to check for the proper 12 volts. Finally if they still do not kick on you will need to replace the cooling fan motor(s).

May 18, 2010 | 2000 Ford Taurus

1 Answer

I have a 39 ford 6 volt battery operated car. I


you need a voltage doubler circuit which feeds from your 6V DC system and converts it to AC and steps it up and converts it to 12V DC. This device might be difficult to find. OR use a 6Vdc power inverter and just use a 120volt AC fan if much easier to source out in your area.
You might want to try a 12VDC high speed fan and see if the 50% reduced speed is already sufficient for you.

Aug 30, 2009 | 2001 Ford Escape

5 Answers

The convertible top stop working


I HAVE 1994 FORD MUSTANG TOP COVERTABLE TOP NOT WORKING FUSS ARE GOOD I CHANGE THE RELAY IN THE TRUNK.I REPLACED THE CONVERTABLE MOTER IN THE TRUNK WHAT ELSE ARE THEY TO DO

Jul 29, 2008 | 1994 Ford Mustang

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

20 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

76109 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

fordexpert

Level 3 Expert

5520 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...