Question about 2006 Dodge Charger

1 Answer

SPARK PLUG INSTALLATION ON 2006 DODGE CHARGER 2.7L

SPARK PLUG LOCATION AND INSTALLATION ON 2006 DODGE CHARGER 2.7L

Posted by on

  • 2 more comments 
  • Anonymous Mar 20, 2014

    The fan stays on

  • Anonymous Mar 23, 2014

    electronic throttle control location on 2006 Dodge Charger

  • Anonymous Mar 23, 2014

    Where can I find the fuze To a 2006 dodge charger

  • Anonymous Mar 23, 2014

    Where can I find the fuze To a 2006 dodge charger to the raido

×

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 61 Answers

In my experience with the 2.7L engine, the spark plugs are located on the top of the engine below the individual ignition coils. The coils are placed between the intake manifold and the valve covers, 3 per side. The coils are held in with "torx" screws. Simply remove the screws, and disconnect the connectors to remove the coils. The spark plugs will be underneath. Be sure to properly gap the spark plugs for maximum life and emissions compliance. Also, an improperly gapped plug can shorten the life of the coil packs.
Hope this helps!

Posted on Jul 25, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

I have a 2006 Dodge Charger just replace alternator will turn over but won't start


Is there spark , fuel ? Fuel pressure test , test electrical circuit ! Go on youtube an check out some videos on trouble shooting Cranks - no start videos ! How to test fuel pump electrical circuit , COP- coil on plug ignition system testing !

Apr 18, 2016 | 2006 Dodge Charger

1 Answer

2006 Charger, 3.5l. Where does this plug in?


it may well not connect to anything, as all manufactures use the same wiring loom for many different model versions, and as each version has different features eg A/C , headlight washers etc as an example .Is there any problems with the running of engine or any OBD codes if not then i'd expect it isn't used on your model

Jun 05, 2015 | 2006 Dodge Charger

1 Answer

How do i change spark plugs on the passenger side of 2006 dodge charger


The passenger is a bit tricky since the oil dipstick is in the way. Use a swivel socket and short extension to remove the bolts.

Nov 23, 2013 | 2006 Dodge Charger

1 Answer

How do I change the spark plug of the dodge magnum 2006


· Open the hood and remove the bolts that hold the engine cover in place, if your Dodge comes with an engine cover (depending on model and year). If so equipped, pull the cover off the engine.

· 2

Grab a spark plug wire by the base of the wire and pull the wire up and out of the engine. (You may need to wiggle it back and forth while pulling up on it to get it out of the engine.)

· 3

Trace the wire back to the power distributor and pull the spark plug wire off the distributor. Make a note of the plug orientation.

· 4

Install the new plug wire in the place of the removed one. Match the new wire with the old one to make sure they have the same size. Press the plug wire over the distributor electrode and onto the spark plug firmly, so that the ends are secure. Installation is the reverse of removal procedure.

· 5

Repeat the above procedure for all the other spark plug wires. It is best to change all the spark plug wires at the same time.

Sep 29, 2010 | Dodge Magnum Cars & Trucks

2 Answers

2006 dodge charger 3.5 change spark plugs


Normal 0 MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:10.0pt; font-family:"Times New Roman";} INSTALLINGS SPARKPLUGS ON 2006 DODGE CHARGER 2.7 / 3.5

Step 1: Disconnect the negative wire to the battery. I did this to be safe.

Step 2: Disconnect the oxygen sensor from the air intake. Do not pull from the wires only pull from the boot. Be careful not to break the sensor either


Step 3: Pull the tube connected to the left side of the air intake off then remove the air intake.


Step 4: Disconnect the map sensor and all other electric components that are attached to the manifold


Step 5: Disconnect the cable that is connected to the throttle body (you do not have to take the throttle body off of the manifold to do this).


Step 6: On the left hand side of the manifold there are 2 manifold support brackets loosen them up but do not take them off. When they are loose just pull the top part of the bracket that is connected to the manifold back and off the screws. .


Step 7: On the right hand side of the manifold there is another support bracket that is connected to the throttle body. First take off the screws then where the support bracket connects to the cylinder bellow the manifold loosen the two bolts until you are able to slide the bracket out of the way.


Step 8: On top of the manifold there are six bolts unscrew them.


Step 9: Important! Before you remove the manifold to get to the spark plugs be very careful and remove the manifold by lifting it straight up and then pull it towards you slow. The reason for this is because there is a valve connected to the manifold directly in the back that you do not want to break. The tubes that are connected are long enough so you can take the whole manifold and place it to the right just out of the way so you can get to the spark plugs. (before changing the spark plug it is recommended that you take compressed air and blow away the dirt surrounding the spark plug area. This is done so that no dirt gets into the combustion chamber when you remove the spark plug.)


Step 10: Once the manifold is out of the way disconnect the electric connectors that are attached to every spark plug. Pull them from the boot of the connector.


Step 11: Unbolt the spark plug tube then pull it straight out and then with the spark plug socket unscrew the spark plug and replace it with a new one (repeat 6 times).


Step 12: After the spark plugs are in on the left hand side of the engine in the back you will see a tube that says pcv. Remove the tube from the engine and unscrew the valve and replace it with a new one.


Step 13: Put everything back and you are good to go.
Once again thank you and I hope this was helpful.

Feb 17, 2010 | 2006 Dodge Charger

1 Answer

Spark plug relacement


its true.. they are recomended every 30,000 miles

Dec 20, 2008 | 2006 Dodge Charger

1 Answer

Changing sparks plugs on a 2006 Dodge Charager


I usually change the spark plugs on all vehicles every 10,000 miles.

Dec 20, 2008 | 2006 Dodge Charger

Not finding what you are looking for?
2006 Dodge Charger Logo

1,423 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

76109 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8270 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...