Question about Nissan Cars & Trucks

Open Question

2005 Nissan Altima...3.5 V6. There is no low pressure port for the A/C. Shop installed a new low pressure line...direct from Nissan....but, it has no low pressure port...like the old line.

Posted by on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 2 Answers

SOURCE: 2005 Nissan Altima

HEY WHATS UP BRO this is what you have to do i just got brand new headlight replacements for my 05 nissan altima and it looks great by the way if you replace one you should just do both becasue it will look weird. anyways i have an hid kit as well but so. what you have to do is remove the bumper take all the plastic screw things off the top and on the botton underneith the bumber then you remove 2 screws on each side of the bumper they are located kinda in the dender well then you unscrew those then you can pretty much pull the bumper off there are 4 screws holding on each headlight 2 on top one on the side and one on the bottom front in order to remove the headlight you have to take off the bumper. hope this helps oh ya and buy buy the way you should get an hid kit the bulbe size for the altima is an h1 bulb and you need to get the single beam buld. get it at xenoneyes.com and the the 6000k. The 6000k look the best and is the brightest trust me you wont be let down they are brighter and last longer than the standard halogen bulb um also and like 5 times brighter. they are 129$ at xenoneyes.com thats the cheapest price that i have seen and they are a great value and good quality just dont touch the bulb. oh ya if you replace one headlight do both it looks much better. maybe try this web site to show you a little bit of how to do it
http://images.google.com/imgres?imgurl=http://thaibruin.netfirms.com/ALTIMA/HID5.jpg&imgrefurl=http://www.nissanclub.com/forums/f-q-2002-2005/65970-how-installing-h-i-d.html&h=600&w=800&sz=60&hl=en&start=17&um=1&usg=__9gLitht8i7ud-QSgy-x_rCBvSWM=&tbnid=TUGSVoemsGTp1M:&tbnh=107&tbnw=143&prev=/images%3Fq%3D02%2Bnissan%2Baltima%2Bhid%2Binstall%26um%3D1%26hl%3Den%26safe%3Dactive%26rlz%3D1T4GGIH_enUS216US216
hope this helps my email is matthewsg2007@yahoo.com let me know how it comes out

Posted on Sep 19, 2008

jschoon77
  • 55 Answers

SOURCE: Location of oil filter on Nissan Altima 2005

The oil filter is located behind the right (passenger) inner fender cover. It is right next to the crankshaft pulley at the bottom of the front of the engine facing toward the right front wheel. I do not have a picture at this time.

Hope this is helpful!


Nissan Scope Technician- 10+ years experience in Nissan dealership.

Posted on Nov 04, 2008

mrgreenz
  • 962 Answers

SOURCE: head light 2005 altima

you have to remove the bulbs from inside of the hood in the engine compartment. in some cars you have to remove some "pins' and remove the entire headlight assembly.. You then remove the holder where the lightbulb is located and replace the bulb.

Posted on Nov 18, 2008

johnny5846
  • 379 Answers

SOURCE: replacing low beam head light on nissan altima

your welcome , glad to have assisted you

J5

Posted on Jan 21, 2009

  • 1 Answer

SOURCE: How do I change brake light bulb on 2005 Nissan Altima

The first objective is to figure out which bulb you need. I had to replace the bulb for the largest light which was a Sylvania 3157. The next objective is to remove the dang plastic carpet holder/net clip. Recognize that it is a two part piece. Use a flathead screwdriver for leverage. Pry the cap off by levering the screwdriver in the slot on the holder. Then go behind the carpet and pinch the plastic pin still holding the holder in place. Next,pry off the while plastic pieces from the two bolt/nuts you'll need to remove (see manual). Remove the nuts and give the two screws a push from the inside so you can see how the whole light casing comes off. Pry it off from the outside. On the backside of the bulb holder, turn bulb base counterclockwise and gently remove. Pull bulb upward and replace. Do not touch glass on new bulb with your fingers (wear non-powdered rubber gloves). Make sure the bulb snaps in place. Follow these instructions in reverse. Smile, you just learned something new and saved yourself some easy money.

Posted on Jan 09, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2005 nissan altima 3.5 compressor has voltage clutch will not engage


I would bypass the low cycling switch and service the ac first,or use direct power and ground to inspect the clutch,just make sure your compressor is not locked up first.

Sep 05, 2016 | 2005 Nissan Altima

1 Answer

How do you get the bolts loose from the alternator for a 2003 Nissan altima 3.5


Kathy, R&R info./instructions in links below. Check the attached links,instruction and guides, Good luck
"I hope this helped you out, if so let me know by pressing the helpful button. Check out some of my other posts if you need more tips and info."
2003 nissan altima 3 5l v6 alternator part 1
how to replace the alternator on 2003 nissan altima 3 5L alternatoe...
2003 nissan altima 3 5l v6 alternator install 1
2002 Altima Alternator How Do Replace the Alternator on My 2002


Jun 16, 2016 | 2003 Nissan Altima

1 Answer

2001 Nissan Altima A/C turns on and off


Pressure may be low due to a leak in the refrigerant lines. Pressure switch will cycle compressor frequently with low pressure. If pressure drops too low, a/c will not work at all.

Oct 18, 2014 | 2001 Nissan Altima

1 Answer

0il light comes on when car is in idle..2005 nissan altima


If the oil level is low, or the oil pump is worn out, this can happen. It indicates a dropping of oil pressure either due to oil moving forward away from the sump (low oil), or reduction of pressure due to lower rpms (worn out pump).

Aug 08, 2014 | 2005 Nissan Altima

1 Answer

Hello! I have a can of 134a refriderant and when I looked for the A/C low pressure port for my '03 Nissan Altima, I found a valve 1 & 2 on the left upper/back part of engine, and an unmarked tube...


Hi, there are two lines coming out of the compressor, one is larger than the other, the larger one is low pressure side or suction side for refrigerant , the port is in that line under a cap , possibly blue, possibly marked with an L for low to be be removed while adding refrigerant, engine running , A/C ON ,use eye protection and gloves.

May 30, 2011 | 2000 Nissan Altima

1 Answer

Where is the low pressure valve for the AC on 2005 nissan altima


you have two lines going to your compressor one is fatter than the other. follow the fatter line till you find the fittlng. it may be on your compressor but it will be at the fatter line.

Jun 07, 2010 | 2005 Nissan Altima

1 Answer

'05 Nissan Altima Low Beam not working


Need to disconnect ground to battery before replacing light bulb or fuse will blow. Fuse is located in engine compartment next to windshield washer fluid.

Jan 06, 2010 | 2005 Nissan Altima

1 Answer

Replacing low beam head light on nissan altima


your welcome , glad to have assisted you

J5

Jan 20, 2009 | 2005 Nissan Altima

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

24 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nissan Experts

yadayada
yadayada

Level 3 Expert

74896 Answers

Phil Lovisek
Phil Lovisek

Level 3 Expert

705 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Are you a Nissan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...