Question about Chrysler Cars & Trucks
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
The haynes book is not recommended since there are numerous mistakes and they still will not update. One of the biggest is the firing order.
The factory service manual is the only way to go.
Head bolts - 46 - 50.5 lbs (there is an order sequence for the bolts)
Intake & exhuast manifolds- 13.5 - 20 lbs
Flywheel - 41.5 - 47 lbs
Clutch cover - 13.5 - 20 lbs
Posted on Mar 17, 2009
ok here we go tie rod=55 ft lbs axel nut= 180 ft lbs strut bolts= 65 ft lbs plus 90 degrees
Posted on Jan 07, 2010
Testimonial: "thank you very much!!!!!!!!!!"
If you buy a Chilton manual at your local parts store for that year of vehicle, it will list all of the torque specs for your engine. They typicaly run about 20 dollars.
Posted on May 12, 2011
SOURCE: I need the head torque
CYLINDER HEAD TORQUE/SEQUENCE:
Use the special tool and a torque wrench to tighten the bolts to 103 - 113 Nm (76 - 83 ft. lbs.) of torque in the order shown in the illustration. Tightening should be done in two or three steps.
CAUTION: Install the head bolt washers with shear droop upward as shown in the illustration
Posted on May 18, 2011
Tips for a great answer:
Mar 31, 2017 | Chrysler Cars & Trucks
Nov 06, 2016 | 2005 Chrysler Pacifica
Aug 18, 2015 | Chrysler Cars & Trucks
May 28, 2014 | 2004 Chrysler Pacifica
Apr 21, 2014 | 2005 Chrysler Pacifica
Mar 28, 2013 | 2004 Chrysler Pacifica
Apr 23, 2012 | 2004 Chrysler Pacifica
Jan 07, 2010 | 2005 Chrysler Pacifica
170 people viewed this question
Usually answered in minutes!