Question about Mercury Cars & Trucks

Open Question


Posted by on


6 Suggested Answers

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

  • 783 Answers

SOURCE: cant get spare tire off

The metal sleeve on the end of the cable,you turn it sideways and push it thru the hole in the wheel. If it is stuck to the wheel just pick up on the wheel then tap the sleeve with a hammer.

Posted on Feb 07, 2009

  • 21 Answers

SOURCE: 1998 Jimmy-heater core

Heater core is located under the dash board, as Jenkins said you need to remove the dash board amd all other panel to access it, you will have to spend at least 2 hours to remove them if you're not familiar with it, becareful not to break plastic locks and tabs. Get your self a service manual for your car and it will be a great help.

Posted on Mar 17, 2009

  • 407 Answers


may be hub bearings or u-joints

Posted on Oct 14, 2009

  • 1374 Answers

SOURCE: 1999 Mercury Mountaineer, heater/AC fan no longer blowing

I would check the fan first disconnect the electrical connectors on it and use a pair of home made jumper cables and run it from the battery. If it works move unto relay if it doesn't you've found the culprit.
Next check relay in the fuse box. Coolant tempertant switch(CTS) aka thermal switch and its circuit. CTS is usually located in the water jacket by the t-stat.

Posted on Apr 05, 2010

  • 1297 Answers

SOURCE: where is the power window relay on a 1998 mercury

technically you have three relays to worry about on these power windows

and all of them are behind the center of the dash in the RELAY box

Posted on May 19, 2010

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Where do i find the heater contol valve on a 1998 mountaineer?

The heat control valve if you stand in front of the vehicle facing it. Is on the left hand side/ passenger side near / very close to the firewall. It's to the right/ towards the driver's side of the blower motor. Before you remove it make sure it works by having someone turn on the heat while you watch it open and close. If it does not open or close check your vaccum line. The vacuum line is a grayish color mostly or may be black in color. If it works don't remove it, replace the heater core or flush your coolant system out. You can also flush out the heater core with compressed air or a water hose. To flush out the heater remove both top and bottom hoses and attach a receive and return hose. You can use CLR to help remove the slug built up in it. Let it seat in the heater core after removing any access or trace of coolant. Remove the CLR after about 10 mintues with high pressure water until it is clear. Replace connections of hoses to the engine and refill any anti freeze that is lost

Jan 09, 2015 | 1998 Mercury Mountaineer

1 Answer

Getting heat in the back of the car but not in the front.

I would take a closer look at the heater control valve located in line with heater core vacuum controlled to close coolant flow to heater core when a/c Is's located by the radiator on passengers has a black plastic lever on it, and the body it aluminum. The lever breaks internally, causing low coolant flow to heater core.remove and you will find white sludge build up. Replace and be on your way....

Mar 05, 2014 | 2004 Mercury Mountaineer

1 Answer

Not heating up all the way

If the engine is not heating up, check the thermostat and coolant level.
If the heater is not getting hot, and both heater hoses are hot, you may have a blend door problem. The blend doors direct air thru the heater core and the vents.

Dec 21, 2012 | 1998 Mercury Mountaineer

1 Answer

The heater on my 2004 mercury mountaineer does not work. When turning the dial from ac to heat, cold air blows out while a sound like a door opening and shutting is heard.

there is a vacuum ran valve on your heater hoses goin in to your heater core on the fire wall, they tend to get stuck shut n dont open to let hot anti freeze in the heater core, so cold air right, qwik fix is find the valve on heater core inlet and wire tie it open so antifreeze circulates no matter what, this is known on ford explorers. pretty much same truck.

Dec 16, 2010 | 2004 Mercury Mountaineer

2 Answers

Heater stop working

check thermostat and heater core

Jan 18, 2010 | 2003 Mercury Mountaineer

1 Answer

Heater quit working on my Mercury Mountaineer 2000. Looking for instructions on how to replace, as we are doing it by ourselves. Already have the part. Anyone have step by step instructions?

you need to be specific on what component of the heater system are you changing then maybe i can help on this matter (e.g.) water pump ,heater core,thermostat,heater control switch,1 way suction valves,vacuum lines, i dont know what you are asking for help on?

Jan 15, 2010 | 2000 Mercury Mountaineer

3 Answers

Heating and cooling

You can't even reach the door without pulling the dash assembly out, then u might as well fix the problem,

Nov 06, 2008 | 1997 Mercury Mountaineer

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

29 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mercury Experts


Level 3 Expert

78267 Answers


Level 3 Expert

5655 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

Are you a Mercury Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides