Question about Citroen C1

Open Question

How do i get a scatch out of a citrin C1 bumper.

Posted by on

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What is citrine gem?


Citrine is the transparent, pale yellow to brownish orange variety of quartz.
http://www.gia.edu/citrine#.V_jWupN97Vo

Oct 08, 2016 | Cars & Trucks

1 Answer

How to remove bumper


1. Remove rear combination light assembly. A. Remove two mounting screws. B. Disconnect electrical connector from rear side of light assembly.

2. Remove bumper assembly. A. Remove four fasteners and four retaining screws from top of bumper assembly. B. Remove mud flap from bumper assembly. C. Remove two screws from bottom of bumper assembly. D. Remove two screws from side of bumper assembly. E. Remove four bumper mounting bolts from under of vehicle.
3. Install rear bumper in reverse order of removal.

Dec 22, 2013 | 2004 Kia Sedona

1 Answer

Where to drill holes for reversing sensor on Toyota Aygo rear bumper?


Hi there, firts of all, if your car its not designed to have that sensors and you draw over the bumper, past the metal plate and after the plate, you maybe find that the holes are not an acces point to get inside the car. That part conforms the collission metals and i guess you have some warranty that maybe that modification cant disable it. I remember that the metal plate in other cars have some holes from design, maybe you could remove the bumper, locate that squares and put your sensors there, but has i said, its not a point to get inside the car for the cables.
Hope this help you.

Nov 25, 2013 | Toyota Cars & Trucks

1 Answer

I lost my lower front bumper (the black plastic part) i have a new one but not sure how to put it on


There is a simple procedure to do that.And basic tools are required.

Click the link below for detailed procedure:----
How to Replace Front Bumper? http://repairhelpcenter.blogspot.com/2011/11/how-to-replace-front-bumper-on-audi-a4.html

-----------
How to Replace a Front Bumper Cover? http://technoanswers.blogspot.com/2011/07/how-to-replace-front-bumper-cover.html

----------
How to Attach the front bumper cover to the fender? http://technoanswers.blogspot.com/2012/01/how-to-attach-front-bumper-cover-to.html

--------------

How to replace Bumpers?
http://repairhelpcenter.blogspot.in/2011/11/how-to-replace-bumpers-on-acura-car.html

--------------
This details will help.
Thanks.

Oct 09, 2012 | Cars & Trucks

1 Answer

How to replace the rear bumper cover on a Chrysler Pacifica


1. Open liftgate. 2. Remove both taillight assemblies by removing 2 hex-head bolts located in the area revealed when the liftgate is opened. 3. Remove 4 plastic retainers on the very bottom of the bumper cover in the rear. 4. Remove 2 phillips head screws in the wheel well rear lip. 5. Remove 4 pop-up plastic retainers in liftgate area. Use two screw drivers to lift the head and then pull the entire retainer out. 6. Remove a hex-head bolt from each side in the area revealed when the taillight assembly was removed. 7. Bend the bumper cover outward on each side to clear the wheel well lip and remove the bumper. Have a blanket or carpet on the ground to protect the bumper. 8. Remove metal clips from tabs that connect the upper bumper cover to the lower bumper cover. 9. Drill out pop-rivets that connect upper bumper cover to lower bumper cover. 10. Push tabs out of slots to separate the upper and lower bumper covers. 11. Release tab locks on chrome trim pieces and remove from upper bumper cover. 12. Reverse this process to replace the bumper cover.

Feb 16, 2010 | 2006 Chrysler Pacifica

1 Answer

Transmission slipping radiator leaking a/c line


wow
time to buy a new used car

check the local car lot and dealer lot dealer trades are usuallly cheep you just need to ask about them they only put the best cars on there lot they warehoust the ugly ones in the warehouse or there fensed in surity area you just need to ask for a cheep one sontimes i get cars for like 500 and they only look so so like the paint has faded bad but the car has 100k and the inside is mint cause granny used to park under a tree so i get ner car after she traded it in for 500 the dealer is happy not to have to re paint the car and i get a great deal

Jan 16, 2010 | 2001 Chevrolet Impala

1 Answer

How to remove the rear bumper on a 2005 Kia Sedona


1. Remove rear combination light assembly. A. Remove two mounting screws. B. Disconnect electrical connector from rear side of light assembly. bs6d007a.gif 2. Remove bumper assembly. A. Remove four fasteners and four retaining screws from top of bumper assembly. bs6d007d.gif B. Remove mud flap from bumper assembly. C. Remove two screws from bottom of bumper assembly. bs6d007e.gif D. Remove two screws from side of bumper assembly. bs6d007b.gif E. Remove four bumper mounting bolts from under of vehicle. bs6d007c.gif 3. Install rear bumper in reverse order of removal.

Nov 09, 2009 | 2005 Kia Sedona

1 Answer

Need to replace the front bumper cover on a 1995 ford escort


its just the bumper cover.. once you buy the bumper cover it will replace your broke one,, however you my need to buy a bumpercover support..i think its only about $30 more..good luck keith...

Mar 15, 2009 | 1995 Ford Escort

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

25 people viewed this question

Ask a Question

Usually answered in minutes!

Top Citroen Experts

yadayada
yadayada

Level 3 Expert

76164 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

14363 Answers

Are you a Citroen Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...