Question about Cars & Trucks
Tips for a great answer:
Jul 27, 2014 | Cars & Trucks
Disconnect the ground cable from the negative battery terminal, by using a wrench to loosen the retaining bolt and pulling the clamp off the terminal.
Raise the vehicle and support with jack stands placed underneath the frame.
Drain the transfer case. Locate the drain plug near the bottom of the transfer case. Place a waste oil collection pan underneath the plug and use a socket to remove it. Once all the fluid has drained out, reinstall the plug.
Remove the bolts that connect the rear driveshaft to the rear axle yoke using a socket. Lower the driveshaft, and slide it backward underneath the rear axle to disengage it from the transfer case. Remove it from the vehicle.
Remove the bolts that connect the front driveshaft to the front axle yoke using a socket. Lower the driveshaft, and slide it forward underneath the front axle to disengage it from the transfer case. Remove the driveshaft from the vehicle.
Label and disconnect the electrical wires and vacuum lines connected to the transfer case. Use masking tape and a marker.
Remove the transfer case shifter rod. Using needle-nose pliers, remove the clip that connects the shifter rod to the transfer case. Slide the rod away from the transfer case.
Position a floor jack underneath the transfer case. Raise it enough to take the weight of the transfer case off the transmission.
Remove the bolts that connect the transfer case to the transmission using a socket or wrench.
Slide the transfer case rearward to disengage it from the transfer case. Lower the floor jack, and remove the transfer case from the vehicle.
Jan 20, 2012 | Cars & Trucks
Feb 28, 2011 | Daewoo Leganza Cars & Trucks
Jan 17, 2011 | 1995 Ford Taurus
May 12, 2010 | Cars & Trucks
Mar 21, 2010 | 1993 Geo Tracker
Feb 25, 2010 | 2002 Chevrolet Camaro
Jun 18, 2009 | 2000 Daewoo Nubira
Mar 29, 2009 | 1988 Mazda B2600 Cab Plus
Nov 27, 2008 | 1994 Chevrolet G20
18 people viewed this question
Usually answered in minutes!