Question about Cars & Trucks

Open Question

Replacement cup holders on my 2011 Sea Ray 2011 SD 240.These have a drain plug in the center. I need exact dimensions.I also need a suggestion for a replacement flush that attaches to pump out.

Posted by on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
  • 168 Answers

SOURCE: No spark at plugs on my 1991 volvo 240

Did you replace the plugs? How hot is the spark from the coil thin and blue? if it is big and orange it is a weak coil and should be replaced. If it is good try an other wire from a different car (do not put a spark plug in it) and see what the spark looks like if good put the plug in it and check the spark again if this is a good the wires are bad

Posted on Mar 06, 2009

Ad
  • 6982 Answers

SOURCE: cup holders for 1997 toyota 4runner

Try a local scrap yard...much cheaper there.

Posted on Jul 07, 2009

  • 524 Answers

SOURCE: Buick Regal cup holder problem

Yes absolutely you can my friend. and you are correct this will fit 1997 to 2004 actually!

Posted on Apr 09, 2010

emissionwiz
  • 76109 Answers

SOURCE: My Teka FCI340 has stopped working and an engineer has confirmed that it needs to be replaced. I am trying to find out the manufacturers dimensions so I can get an alternate replacement as Teka appear

I'm sorry but I believe you have this posted in the wrong product category? Please re-post the question in the proper category if this is the case, otherwise you have my apologies. This is the car and truck problem category



Posted on Jul 16, 2012

  • 24 Answers

SOURCE: Where is the drain plug on my 2011 dodge avenger so i can do a radiator flush

Follow this diagram, and the red arrow lol
DRAINCOCK, Radiator
Number on Image: 22
25730347-vjurxzpykhcjlldy45nrgwvl-3-0.jpg

Posted on Jun 05, 2015

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

The cupholder in my Montana is stuck,and won't come out...what do I take apart to get it back out?


Dash Cup Holder is stuck and won't come out, how do I fix ...

www.fixya.com/.../t10005627-dash_cup_holder_stuck_won_39_t_come
Aug 5, 2011 - Dash Cup Holder is stuck and won't come out, how do I fix it? - Saab 2004 9-3 ... How do I remove an in-dash cup holder in my 2005 Chevy Malibu. Apr 26, 2014 ' 2005 ... Nov 05, 2012 ' 1999 Pontiac Montana ยท 1 Answer ...

cup holder montana van Questions & An


Dec 26, 2015 | Cars & Trucks

1 Answer

2011 Honda Ridgeline center console cup holder can't retract. Stuck in the extended position. Won't close. Hits something.


Most often it is just gummed up with soda syrup. spray a little armor all into the mechanism and let it sit for a few minutes, then operate the mechanism. repeat until it works smoothly again, making sure to wipe any excess fluid up. Hope this helps.

Nov 11, 2015 | Honda Cars & Trucks

1 Answer

I AM TRYING TO TAKEOUT A CENTER CONSOLE OUT OF A 2000 CHRYSLER INTREPID


Hi Ken, I'm glad to help! Ken I have removed so many of the center consoles on Intrepids, heck I can do it in my sleep. I'm not sure how far you have gotten removing it. But there are some hidden screws under the rear cup holder. Pull the rear seat cup holder out and there is one in the very front and 2 down inside the slot. Those are the only ones you need to remove the other screws simply hold the cup holder in. The rest of the removal is very easy. Hope this helps and have an awesome day Ken!

Apr 18, 2014 | 2000 Chrysler Concorde

1 Answer

Replacing cup holder


I assume you mean the one that flips up in the center console?

If so, there are three likely issues.

1) did you slide out the retainer from the upper screw? the top screw had a cover that had to be pried off. you then took the screw out. Lastly you have to slide out the plastic retainer that the screw went into. It slides out towards the opening.

2) you have to have the cup holder partially open to remove it. the hinged part that folds up is stored in the cavity under the console when closed. you have to open the cup holder and keep pushing until the front of the cup holder lip comes up. Work the cup holder up and down until it comes out.

3) the cup holder is stuck in place due to years of spilled liquid. If you've done the above, then you can either spray soapy water on the creases around the opening and let it set, or you can apply strategic brute force.
Be aware through. if this is the center console cup holder just behind the gear shifter. There are two screws and nothing else to hold it in. Just be carefull....

Mar 17, 2014 | Volvo S80 Cars & Trucks

2 Answers

How do i change the radiator hose?


BUY YOUR RADIATOR HOSES FIRST MAKE SURE NEW HOSES MATCH THE OLD HOSES. BUY NEW RADIATOR CLAMPS AND HAVE EXTRA GALLON OF ANTIFREEZE. MAKE SURE ENGINE IS COOL IF YOU GOING TO CHANGE TOP RADIATOR HOSE REMOVE RADIATOR CAP OR OVER FLOW JUG CAP IF YOUR RADIATOR DONT HAVE RADIATOR CAP FIND RADIATOR DRAIN PLUG.PLACE A CATCH PAN.OPEN RADIATOR DRAIN PLUG CATCH ANTIFREEZE. DRAIN HALF ANTIFEEZE IF YOU GOING TO REPLACE TOP HOSE AND DRAIN OUT ALL ANTIFREEZE IF YOU GOING TO CHANGE LOWER COOLANT HOSE TO WATER PUMP.WHEN DONE CLOSE DRAIN PLUG.PUT ANTIFREEZE IN A SAFE PLACE FROM PETS AND KIDS UNTIL JOB DONE. WHEN YOU REMOVE COOLANT REMOVE WATER HOSE CLAMPS THEN REMOVE RADIATOR HOSES PUT NEW RADIATOR HOSES AND CLAMPS ON HOSES TIGHTEN HOSE CLAMPS DONT OVER TIGHTEN. POUR ANTIFREEZE IN RADIATOR.CRANK ENGINE UP CHECK FOR LEAKS.CHECK COOLANT LEVEL WHEN THERMOSTAT OPENS ADD MORE COOLANT AS NEEDED.

Jun 13, 2010 | 1991 Buick LeSabre

1 Answer

Buick Regal cup holder problem


Yes absolutely you can my friend. and you are correct this will fit 1997 to 2004 actually!

Jul 10, 2009 | 1996 Buick Regal Olympic Gold

1 Answer

Cup holders for 1997 toyota 4runner


Try a local scrap yard...much cheaper there.

Jul 07, 2009 | 1997 Toyota 4Runner

2 Answers

Broken cup holder in 2000 BMW 740iL


unfortuantly the whol center councle needs taken apart it is harder than it looks sorry for the bad news, an easy fix is to just replace the front part of the cup holder

Mar 24, 2009 | 2000 BMW Z8

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

19 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

76109 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...