Question about Nissan Cars & Trucks

1 Answer

Where is the high beam headlight fuse in a 1996 Nissan 200sx

High beams both out - low beams work fine

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Nissan Master
  • 786 Answers

Those fuses should be in a plastic box under the hood near the battery also check the relays. It should have a legend printed on the lid for fuse and relay function.

Posted on May 15, 2017

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My high beams work but my low beams and tailights do not


this circuit is fused also the headlight switch controls both functions for low as well as running lights

Aug 01, 2012 | 1986 Nissan 300ZX

1 Answer

My low beam head lights will not work, but high beam will. What could the problem be.


The headlight bulb has two elements. One works with high beam and the other works with the low beam. The low beam element is broken/fused. You have to change the headlight bulb in this case which is available at any of the auto spares shop.

Aug 02, 2011 | Nissan Pathfinder Cars & Trucks

1 Answer

My nissan maxima's headlights go fine on dip and full but when you put them on high beam they just cut off completely any ideas on how to fix this???


Have you replaced the lamps? Most car headlamps have separate elements for low beam and high beam. If both elements are broken, there's your answer. I believe also that the high beams are on a separate fuse to the low beams, so check your fuses to make sure it hasn't blown. Hope this helps!
Cheers, John

Nov 23, 2010 | 1990 Nissan Maxima

1 Answer

Right headlamp doesn't work on low beam only


in this case make sure you have voltage going to the low beam lights. 12 volts. you need a volt meter. if you do not have volatge you have to check and make sure power is going through the fuse. a bad fuse will be broke, but you can have a good fuse with no power going through it. if you have power going through the fuse you have a wiring open somewhere between fuse and whatever is between the headlight connecter.

plz check and get back i will keep checking on here on and off.

Michael
ASE certified
PLZ rate

Feb 09, 2009 | 2004 Acura TL

1 Answer

Highbeam Headlights not working


try replacing the fuse because low beam and high beam are two different systems

Aug 07, 2008 | 1996 Chevrolet Cavalier

4 Answers

Low beam headlights do not work, but high beam headlights do


Clyde,

I've been troubleshooting this same problem on a different vehicle this week, and I can give you the steps I'd take.

1. If both sides went out at the same time, the problem is *NOT* likely to be the bulbs.

2. Check the fuses to see if both low beam lights are on the same fuse. Many cars have one fuse for low beam and another for high beam, so both lights out at the same time typically means fuse blown.

3. If the headlights are OK and the fuses are OK, then the problem is *LIKELY* the headlight switch. In my case, AutoZone has one and it can be installed easily; but in your case, that may not be as simple.

Please post your findings or comments.

Jul 16, 2008 | 1991 Nissan Pickup

2 Answers

What would cause both low beam headlights to go out at the same time? i have replaced the headlights and they still dont work.


The headlight high/low beam switch assembly.96 Safari has the turn signal stem as the high/low beam switch.Removal of the steering wheel is necessary to get to the switch assembly for replacement.

Jul 13, 2008 | 1996 GMC Safari

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

20 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nissan Experts

yadayada
yadayada

Level 3 Expert

75807 Answers

Phil Lovisek
Phil Lovisek

Level 3 Expert

713 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22133 Answers

Are you a Nissan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...