Question about Cars & Trucks

2 Answers

2003 nissian aliima car won't turn over and do I have a timing belt or chain all you hear is clicking when turning over

Posted by Anonymous on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 8 Answers

Dont understand your reference to 'timing chain/belt'.

However..sounds like you either don't have enough current capacity in your battery to get the starter going, or your starter (there's a solenoid that is integrated into it) is failing.

If you have someone or "triple A" provide you with a boost/jump to your battery (allow 5 mins at least before trying to start) or if you have a battery charger (charge over night), if this works then you need to either replace the battery, or if a new battery already, your alternator is not charging, or you're drawing too much from the battery when driving (like a massive boom box stereo), or leaving lights/something on.

If the above doesn't work and.....If you are up to trying this and you must do it safely, meaning don't get yourself in a situation where you can hurt yourself or cause more damage. You can try to kick your starter in the '13UTT'

If you locate your starter, you can tap it with a small hammer. (google where it's located for your make and model), doesn't matter where you tap it. If it starts, then you know you need to have it replaced asap.

Posted on May 15, 2017

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Cars & Trucks Master
  • 1,717 Answers

I believe it has a chain.

Posted on May 15, 2017

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

03 Suzuki aerio need a step by step how to: replace the timing chain! Please help


WOW you work on engines not knowing what is there?
the engines are: 7 engines.!!!
1.3 L I4; 1.5 L I4; 1.6 L I4; 1.8 L I4; 2.0 L I4; 2.3 L I4; 1.4 L Diesel I4 ill guess, ( (die roll)
2.3 L below.

all answers, USA cars, this a USA forum. so.....
ever heard of the FSM the oem factory service manual?

is the chain making noises? if yes, the guide is bad, most chains fail due to that (as a true cause)
the FSM is here , just $4 to look , so ????
https://suzukipitstopplus.com/Products/1178-2003-aerio-service-manual.aspx

the clone is Alldata.com DIY, log in and read like we do.
google alldtata.com , bingo....

now the 2.3L (just the first half, ill let you pay $4 like we do)
  1. Before servicing the vehicle, refer to the Precautions Section.
  2. Remove engine assembly from vehicle.
  3. Remove oil pan.
  4. Remove cylinder head cover.
  5. Remove timing chain cover as follows:
    • Remove crankshaft pulley bolt. To lock crankshaft pulley, use special tool 09917-68221 (camshaft pulley holder).
    • Remove crankshaft pulley. To remove crankshaft pulley, use special tools 09944-36011 and 09926-58010 (steering wheel remover and bearing puller attachment).
    • Remove A/C compressor bracket.
    • Remove alternator belt idler pulley, water pump pulley and alternator belt tensioner.
    • Remove timing chain cover bolts and nut.
    • For reinstallation of timing chain, turn crankshaft so that timing marks on cylinder head and lower crankcase match with those on sprockets as shown in figure.
    • Remove second timing chain as follows:
      • Turn crankshaft to meet following conditions.
        • Key (I) on crankshaft is positioned as shown.
        • Arrow mark on idler sprocket (II) points upward.
        • Marks on sprockets (III) match with marks on cylinder head. Note that this step must be followed for reinstallation of timing chain.
      • Remove timing chain tensioner adjuster No.2 and gasket. To remove them, slacken second timing chain by turning intake camshaft counterclockwise a little while pushing back pad.
      • Remove intake and exhaust camshaft timing sprocket bolts. To remove them, fit a spanner to hexagonal part at the center of camshaft to hold it stationary.
      • Remove camshaft timing sprockets and second timing chain.
      • warning
      • After second timing chain is removed, never turn intake camshaft, exhaust camshaft and crankshaft independently more than such an extent as shown. If turned, interference may occur between piston and valves and valves themselves, and parts related to piston and valves may be damaged.
      • Remove timing chain guide No.1.
      • Remove timing chain tensioner adjuster No.1.
      • Remove timing chain tensioner.
      • Remove idler sprocket and first timing chain.
      • Remove crankshaft timing sprocket.
      • end.
    im not doing INSTALL, sorry.


25540491-yqaloxbadhjyikzm2dpnlv4n-2-0.jpg got that? also there are a hole section on details of gasket seals and such, nothing trivial that.

Mar 09, 2015 | 2003 Suzuki Aerio

1 Answer

1991 infiniti i30 3.0 liter,won't start ,turns over faster than normal


Your timing belt or chain could be broke.
First model year for the I 30 in the US was 1996 and it used a timing chain.
Have you checked compression yet ?

Feb 16, 2013 | Cars & Trucks

2 Answers

I have an 03 nissan altima engine makes loud clicking noise


1st check the the oil level and the vehicle's oil type.(owners manuel) 5w30-10w30
10w 30 is a thicker oil and could possibly be causing this.(Moves more freely through the engine heats the oil)

May 17, 2009 | 2003 Nissan Altima

2 Answers

Does the 1996 Nissian Maxium have a timing belt or timing chain?


Just about everything has a timing belt now days, because they are quite. A timing belt is a very important part of your car, it won't run without it, and in many cases if it breaks you will trash your engine in an instant. I'd change every time I change my other belts, I honestly believe that is a good rule of thumb, Your owners manual should tell you what the manufacturer recommends. I hope this helps, I do this for free, and I just want to help people.

Dec 19, 2008 | 1996 Nissan Maxima

1 Answer

Vehicle will not start


is the engine turning very fast and making an uncommon noise . if it is then you more than likely have a broken timing belt . if this is not the case then you need to check for spark .

Dec 08, 2008 | 2003 Nissan Sentra

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

18 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

74896 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...