Question about Scion Cars & Trucks
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
SOURCE: Warning lights won't go off.
You need to have a code scanner hooked to the car to find out why the lights are on, if there is an auto zone or advanced auto near you, go there and ask them if they can hook one up, or call around to see who can do it.
Posted on Jun 01, 2009
SOURCE: 2005 Toyota Highlander
there are literally hundreds of codes that would turn on the check engine light. the track off and vsc lights come on together, indicating a problem with the traction control system. again, many different items will turn these lights on. the only way to narrow it down is to hook it up to an OBD-II diagnostic tool and find out all the codes that are listed. if you don't have one, take it to a shop
Posted on Feb 21, 2010
I have a 05 Scion XB W/215000 mi My vsc ck eng light go on all the time. The dealer told me it was a little dirt speck of dirt in the timing gear and it would cost almost a thousand dollars to fix it. So I just disconnect the neg battery cable for 2 minutes and reconnect. The light stays out for about 4-6 months. when it comes on again I just repeat the steps.
Posted on Apr 10, 2010
SOURCE: How do you replace the
Remove the three bolts and two screws from the front of the lens. You will need a ten mm socket with and extension to reach the outside recessed bolt. The other two are located directly in front of the radiator area and are easily removed. You may need to remove one or two screws holding the rubber seal. That depends on your model and year. Head light unit now slides out forward and allows access to the bulb connections. You may have to wiggle it a bit to get it to move.
More detailed procedure as follows:--
Open up the hood. Get the Phillips Screw Driver in Hand. There is 4 Tabs with screws in them that hold the xA's Headlight on. Take the Screw driver and remove all the screws from those 4 points.
In order to remove the bottom screw, you will have to pull away the bumper Up then Out Slowly and Gently at these points.
Then push the bumper down, very little, just enough to stick the Phillips screw driver in and remove the 4th screw. It is alot easier than it sounds. After you remove the screws, gently pull out the headlight, remove the bulbs, (which in turn frees the headlight) and finish removing the headlight.
Thanks. Keep updated for any more query. You can rate this
solution and show your appreciation.
Posted on Aug 31, 2010
SOURCE: 2005 Scion XA Check Engine
The check engine light means that something is going wrong with the engine, electric, or emissions part of your vehicle. it will need to be hooked to a scanner to find out what the trouble codes are. Usually Autozone will scan and give you the codes for free. get them and post them here and i will try to help you with the diagnostics
Posted on Oct 06, 2010
Tips for a great answer:
Jan 21, 2013 | 2005 Scion xA
May 14, 2017 | 2005 Scion xA
Mar 25, 2012 | 2005 Scion xA
Jan 31, 2011 | 2005 Scion xA
Jan 06, 2011 | 2005 Scion xB
Oct 06, 2010 | 2005 Scion xA
Sep 16, 2010 | 2005 Scion xA
Jan 14, 2010 | 2005 Scion xB
Sep 14, 2008 | 2005 Scion xA
26 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: