Question about Cars & Trucks

Open Question

Wiskunde vraestelle graad ses - Cars & Trucks

Posted by on

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

Tip

How To Check & Reset Your 2002-2006 Nissan Altima Service Engine Soon (SES)...


The following directions will help you decode your 2002-2006 Nissan Altima's Service Engine Soon (SES) light and reset it.<br /> <br /> <span style="font-weight: bold;">Obtain The Trouble Code</span><br /> <ol> <li>Turn the ignition key to the ON position and wait three seconds.</li> <li>Put the accelerator pedal to the floor and release it five times in less than five seconds.</li> <li>Wait exactly seven seconds. Put the accelerator pedal to the floor for ten seconds until the SES light flashes.</li> <li>Release the accelerator pedal and start counting flashes to obtain the four-digit trouble code.<br /></li></ol> <ul> <li>Long flashes (0.6 seconds) indicate the first digit of the code; count the blinks one through nine and write down the first digit. (Ten blinks indicates a zero.) </li> <li> The next three digits blink faster (0.3 second) and have a 1 second pause between digits.</li> <li>The ECM code repeats until you turn the ignition key to the OFF position.</li> <li>You can look up the trouble codes in the Service Manual.</li> <li>If you get four blinks of ten, or 0000, the ECM indicates no malfunction.<br /></li></ul> <br style="font-weight: bold;" /><span style="font-weight: bold;">Clear The Trouble Code</span><br /> <ol> <li> Clear the code and the SES light by holding the accelerator pedal down to the floor for 10 seconds or more while the SES light is blinking.</li> <li>When the pedal is released, the ECM will erase the trouble code(s).</li></ol>

on Feb 15, 2011 | 2002 Nissan Altima

1 Answer

Codes po171 174


Here we go.... just pulled out our service ticket:

Soooo interesting, I had never looked at these before:

So on 1/10/2005 we took the Vue in, and they did the following:
date: 1/10/2005
"CUSTOMER STATES THE SES LIGHT IS ON"
CAUSE: UNKNOWN
TECH COMM: SES LIGHT IS ON. FOUND FUEL TRIM LEAN CODE P0171 & P0174. RETORQUE INTAKE VACUUM CHAMBER BOLTS AND INSTALL VACUUM CHAMBER SPRINGS PER BULLETIN02/06/01/016A

REPAIR 1: INLET AIR CONTROL VACUUM RESERVOIR - REPLACE


Then, evidently it came back on a week later:

date 1/17/2005:

LINE1: "CUSTOMER STATES THE SES LIGHT IS ON"
CAUSE: OPEN
TECH COMM: SES LIGHT IS ON.
FOUND CODE P0171 FUEL TRIM LEAN B1 CODE P0174
FOUDN MASS AIR FLOW SENSOR FAILED REPLACED MAF SENSOR


...

The problem NEVER came back..

There's my experience. Good luck!

Apr 19, 2014 | 2002 Saturn VUE

1 Answer

Why is my Grand Prix surging/stalling when ideling?


If you did not disconnect the battery and drain the voltage from the ECM, it could be using old settings when the problem existed.
When a problem occurs, the computer tries to correct it or find new settings to work around the problem. When you fix a problem you have to clear the codes and sometimes erase the memory from the computer to allow it to start back at the factory settings.
When you disconnect something and the check engine light comes on, the computer goes into limp mode and uses values for the sensors preset by the factory. The car will almost always run rich to ensure the driver can get back to a place for repairs.

Aug 23, 2012 | 2000 Pontiac Grand Prix

1 Answer

Took my car (1994 Deville) to a GM auto repair Monday for an SES light on and they supposedly had the rear 02 sensor replaced and cleared the DTC as stated on the invoice. When I picked up the car...


even a dealer can make a simple mistake, But since you had the car done there I would take it back and ask them to re-clear the code, if there is a problem it will pop up again, since they guaranty their work,, if it does,, have them fix the problem

Sep 01, 2011 | 1994 Cadillac DeVille

1 Answer

Is there any recalls on the gas tanks of the 2006 cobalts cause my tank is leaking at the top


Fuel Sys, Driveability, Filters (Air & Fuel)
2006 CHEVROLET COBALT


02/01/2006 ELIMINATION OF FUEL FILLER TUBE FLAPPER DOOR 03/01/2006 ERRATIC FUEL GAUGE READINGS 06/01/2006 USAGE OF E85 FUELS IN GM VEHICLES - REVISED 06/01/2006 L61 ENGINE MALFUNCTION INDICATOR LAMP (MIL)/SERVICE ENGINE SOON (SES) LAMP ILLUMINATED WITH DTC P0171 "FUEL TRIM SYSTEM LEAN" SET 07/01/2006 TOP TIER DETERGENT GASOLINE - DEPOSITS, FUEL ECONOMY, NO START, POWER, PERFORMANCE, STALL CONCERNS - REVISED 07/01/2006 USE OF E85 FUELS IN VEHICLES NOT CERTIFIED BY GM AS BEING FLEX FUEL COMPATIBLE / AFTERMARKET CONVERSIONS OF VEHICLES TO OPERATE ON E85 FUELS 09/01/2006 397.pdf&btitle=2006 CHEVROLET COBALT&yr=2006">GM FUEL SYSTEM TREATMENT PLUS, FUEL SENDING UNIT CORROSION AND FUEL SYSTEM DEPOSITS - REVISED 11/01/2006 940.pdf&btitle=2006 CHEVROLET COBALT&yr=2006">ERRATIC FUEL GAUGE READINGS - REVISED 03/01/2006 USAGE OF E85 FUELS IN GM VEHICLES - REVISED 12/01/2006 TOP TIER DETERGENT GASOLINE - DEPOSITS, FUEL ECONOMY, NO START, POWER, PERFORMANCE, STALL CONCERNS - REVISED 01/01/2007 EMISSION RECALL - ENGINE FUEL INJECTORS - REPLACE 01/01/2007 LSJ, L61, LK5, L52, LL8 ENGINE - REDUCED ENGINE POWER, MIL/SES LIGHT, DTC P1516, P2135, P2138 02/01/2007 MULTIPLE DRIVEABILITY SYMPTOMS DUE TO CLOGGED FUEL INJECTORS, MIL/SES DTCS P0171, P0172, P0174, P0300, P1174, P1175 - REVISED 03/01/2007 MULTIPLE DRIVEABILITY SYMPTOMS DUE TO CLOGGED FUEL INJECTORS, MIL/SES DTCS P0171, P0172, P0174, P0300, P1174, P1175 - REVISED 05/01/2007 MULTIPLE DRIVEABILITY SYMPTOMS DUE TO CLOGGED FUEL INJECTORS, MIL/SES DTCS P0171, P0172, P0174, P0300, P1174, P1175 - REVISED 06/01/2007 <A href="http://arrc.epnet.com/autoasp/data.asp?sid=122357497&uid=s9193090.remote.autorefctr&type=pdf&ff=082000

Jul 12, 2010 | 2006 Chevrolet Cobalt

1 Answer

My gmc envoy idles rough and the ses light pop on with a p015


See or call your local auto parts store such as AutoZone or O'Reillys for the trouble code definition. Also, make sure your gas cap is really secure, and I mean tight.
Rick

Apr 16, 2010 | 2003 GMC Envoy

2 Answers

SES light (again!)


P0440 code is EVAP control system problem.This has to do with emissions from the carbon can, fuel tank and general leaks that come from fuel evaporation. Anywhere gas fumes can escape the systerm. This code is very common and can be caused by a simple fuel cap being loose or leaking. Check the fuel cap and reset the coputer. If the SES light comes back on there could be a problem with some of the systerm controls. ie vent valve,purge valveand canister. And /or vac leaks.

May 26, 2009 | 2003 Saturn VUE

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

24 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

76051 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...