Question about Mitsubishi Diamante

Open Question

How to replace headlight assembly 2004 diamante

Posted by on

3 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 60 Answers

SOURCE: I have to replace the ballast for the HID

You need to remove the front bumper. Five push clips along the hood line, remove the headlight wipers (if equipped), one T25 screw in the front of each fender well, then two 12mm bolts under the headlights (1 each side). Then there are 4 10mm bolts holding the headlight in.

Posted on Aug 27, 2009

  • 5631 Answers

SOURCE: I've a 2004 malibu front headlight signals blow out driver side blows most ? Tried replacing bulb, replaced entire headlight assembly still continues to blow out? Help

If lights keep blowing out, you should scan the computer of your car to search for some circuit problem

Posted on Aug 14, 2015

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Changing low beam bulb


depending on which side it is either the battery box asembly or the air cleaner assembly has to be removed to get to the wire keeper that holds the headlight bulb assembly in the rear of the headlight housing. then release the wire keeper and the bulb assembly comes out of the rear of the headlight housing and you can change the bulb. do not touch the glass part of the new bulb assembly, only handle the metal part of the new bulb assembly.

Nov 10, 2013 | 2004 Mitsubishi Diamante

1 Answer

Lights will not turn on


HEADLIGHTS NOT WORKING


It can be faulty headlight switch or issue with its wiring. Or its faulty head light fuse.


==========

To troubleshoot the issue i suggest you few help links with appropriate solution. So you can follow the test and confirm what exact problem is there in your case of headlights not working:-----

Click the link below: -----


All headlights not working?

http://repairhelpcenter.blogspot.com/2012/01/all-headlights-not-working.html

----------

Working of Headlight switch?
------------
Both headlight bulbs blow together?

------------
Car headlight bulbs don't last long?

---------------

2007 Dodge Caliber: Low Beam Headlight Not working

http://technoanswers.blogspot.in/2012/06/2007-dodge-caliber-low-beam-headlight.html

----------

2003 Toyota Camry: Headlights Work Intermittently?

http://technoanswers.blogspot.in/2012/04/2003-toyota-camry-headlights-work.html

----------

Chevy Tahoe: Low Beam Lamps are not working?

http://technoanswers.blogspot.in/2012/04/chevy-tahoe-low-beam-lamps-are-not.html

----------

2001 Chevrolet Tahoe: Headlights not coming ON?

http://technoanswers.blogspot.in/2012/04/2001-chevrolet-tahoe-headlights-not.html

--------

2004 Dodge Ram: High Beam Light is DIM?

http://technoanswers.blogspot.in/2012/04/2004-dodge-ram-high-beam-light-is-dim.html

----------

2001 Chevrolet Tahoe: Both Low Beam Lamps Not Working?

http://technoanswers.blogspot.in/2012/04/2001-chevrolet-tahoe-both-low-beam.html

------------

Low beam headlights Modification?

http://schematicsdiagram.blogspot.in/2012/04/low-beam-headlights-modification.html

---------
How to Replace a Headlight

http://schematicsdiagram.blogspot.com/2011/08/how-to-replace-headlight.html

------------
How to Replace a Headlight Bulb


http://schematicsdiagram.blogspot.com/2011/07/how-to-replace-headlight-bulb.html

-----------
How to Replace a Headlight Switch

http://schematicsdiagram.blogspot.com/2011/07/how-to-replace-headlight-switch.html

----------
How to Replace a Headlight Assembly

http://schematicsdiagram.blogspot.com/2011/08/how-to-replace-headlight-assembly.html


How to Replace a Park Light Assembly

http://schematicsdiagram.blogspot.com/2011/08/how-to-replace-park-light-assembly.html

-----------

Low beam headlights Modification?

http://schematicsdiagram.blogspot.in/2012/04/low-beam-headlights-modification.html

----------

Headlight Assembly Removal On Honda Accord

http://technoanswers.blogspot.in/2012/06/headlight-assembly-removal-on-honda.html

---------------

Honda Headlight Assembly Removal
http://schematicsdiagram.blogspot.in/2012/06/honda-headlight-assembly-removal.html

-----------

How to Replace a Headlight Door

http://schematicsdiagram.blogspot.com/2011/08/how-to-replace-headlight-door.html

----------

How to replace HID headlight bulbs for lexus 400h?

http://schematicsdiagram.blogspot.com/2012/01/how-to-replace-hid-headlight-bulbs-for.html

----------------

These will help.

Thanks.

Nov 28, 2012 | 1986 GMC K1500

1 Answer

How to replace headlight assembly


  • 1

    Open the hood of the vehicle to disconnect the cable from the negative battery terminal and expose the headlight assembly.

  • 2

    Remove the headlight retainer clips by pulling toward the engine compartment.

  • 3

    Turn the bulb holder counterclockwise to pull the bulb from the headlight assembly and disconnect the electrical connection.

  • 4

    Install the new headlight. Do not touch the glass of the headlight -- oil from your fingers can cause the bulb to overheat and fail.

  • 5

    Replace bulb holder into headlight assembly and turn clockwise to secure it. Fasten the the retainer clips to secure the headlight assembly.


  • The retainer clips look like this :
    azzkikronu_3.jpg

    Jul 30, 2011 | 2004 Chevrolet Blazer

    2 Answers

    How do you remove the headlights off a Pontiac grand am 2004


    Lighting Headlight, Side Marker, Park & Turn Signal Assembly Removal & Installation To Remove:
    1. Open the hood.
    2. Remove the front air deflector.
    3. Apply light pressure to the headlight lens to hold the headlight in place while disconnecting the retainers.
    4. Lift up the headlight retainers to release the housing.
    5. Remove the headlight assembly, pulling straight forward from the headlight mounting panel. NOTE: Note the location and position of the adjuster retainers and locator tab.
    6. Disconnect the wiring harness from the headlight assembly.
    7. Rotate the bulb(s)/socket(s) as needed counterclockwise to release.
    8. Remove the bulb(s)/socket(s) from the headlight assembly.
    To Install:
    1. Install the replacement bulb(s)/socket(s) to the headlight assembly rotating clockwise until fully seated.
    2. Connect the wiring harness to the headlight assembly.
    3. Position the headlight assembly to the mounting panel.
    4. Apply light pressure to the headlight assembly lens to hold the assembly in place while installing the retainers.
    5. Align the headlight assembly retainers and slide them over the assembly mounting tabs
    6. Install the front air deflector.
    7. Close the hood.
    prev.gif next.gif

    Feb 02, 2011 | 2004 Pontiac Grand Am

    2 Answers

    Trying to change headlight bulb


    Hello,

    The 2004 grand prix pontiac houses 2 headlight bulbs per headlight assembly. The low beam headlight are located at the fender of the car and the high beam on the grill side of the assembly.

    To replace the headlight bulb of Your pontiac grand prix, 2004 model. It is qiute technical and moderately easy to fix. There is no solution that cannot be done the DIY way, as long as You get the proper guide and You are technically able to do such works.
    1. Park the Grand Prix on a flat surface, apply the parking brake and ensure both the engine and headlight switches are off.
    2. Open the hood and approach the headlight assembly with the faulty headlight bulb.
    3. Locate the headlight assembly retaining clip. It's behind the headlight assembly on top on the fender side. Lift the clip upward halfway to release the headlight assembly.
    4. Pull the assembly out being careful not to scratch the paint on the fender or the lens of the assembly.
    5. Reach behind the assembly and disconnect the wire connection and plug from the headlight bulb socket.
    6. Turn the socket of the bulb counterclockwise 1/4-turn to remove the composite bulb from the assembly. Discard the bulb.
    7. Install the replacement bulb into the assembly (handling the plastic socket part only oil in skin will damage the glass bulb of halogen bulbs because of the intense heat they burn at), but ensure the tabs of the socket end of the bulb are aligned with the notches in the assembly before turning it clockwise and locking the bulb into place.
    8. Plug the wire connection back into the socket of the bulb before replacing the assembly back into place and pushing down on the retaining clip. Test the headlight bulb for operation before closing the hood.
    Hope this was helpful. Thank You for using FixYa!!!

    Jan 15, 2011 | 2004 Pontiac Grand Prix

    1 Answer

    Can the headlight assembly of a 2004 Toyota Sienna be disassembled to replace a faulty low beam bulb?


    The whole bulb will have to be replaced. One bulb has high/low beam. You should be able to access it from behind the light assembly. You should have a locking device at the headlight assembly and be able to pull the assembly out to make it easier.

    Sep 09, 2010 | 2004 Toyota Sienna

    1 Answer

    Is there a way to replace the horn for a 2004 Malibu


    the horn is easiest to access by removing the right front headlight assembly. to remove headlight assembly, there are to plastic slide pins, just pull up on these to remove assembly.

    Mar 21, 2010 | 2004 Chevrolet Malibu

    1 Answer

    2004 Audi A4 headlight replacement


    you have to loosen the whole headlight assembly to open the covers behind the lights to actually get to the bulbs. 4 screws, 2 are on the top of the assembly(phillips screws) the other two are hex and attach the bottom of the assembly to the car. somewhat difficult to see but look behind the assembly and down into the compartment and loosen the screws(they don't fully come out) just enough to pull the assembly out. open the black cover behind he low bean and there is the bulb

    Jan 21, 2010 | 2004 Audi A4

    1 Answer

    Replacing the low beam headlight on a 2004 gmc envoy


    Just above the headlight assembly are two angled tabs, pull these straight up (they may need some effort). These will release the assembly, carefully pull the entire assembly forward. Access to the headlight bulb is behind the two rubber caps, the upper cap is for the low beam. Remove this cap, twist the headlight bulb socket CCW and remove. Disconnect bulb from harness by prying up gently on locking tab on socket, and pull bulb out. Being careful not to touch the new bulb glass surface with your finger, plug it into the socket and install it back into the headlight assembly turning it CW. Reinstall rubber cap, seat headlight assembly on frame, lining up the bottom and top pegs. Once the assembly is fully seated, push the two angled tabs down, locking the assembly in place.

    Oct 15, 2009 | 2004 GMC Envoy

    1 Answer

    Replacing headlight assembly --or cover--for Kia Optima-2004



    1. Open hood. Disconnect negative battery cable.
    2. Remove five bolts attaching headlight and combination light assembly to vehicle. deb10ad.jpg 3. Pull headlight and combination light assembly forward clear of vehicle. 4. Rotate back cover counterclockwise to disengage from light assembly. 5. Pull socket with bulb straight out of headlight and combination light assembly. Regards, Jeep Brainy

    Jun 22, 2009 | 2004 Kia Optima

    Not finding what you are looking for?
    Cars & Trucks Logo

    Related Topics:

    63 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Mitsubishi Experts

    yadayada
    yadayada

    Level 3 Expert

    75822 Answers

    Colin Stickland
    Colin Stickland

    Level 3 Expert

    22156 Answers

    Jeff Turcotte
    Jeff Turcotte

    Level 3 Expert

    8215 Answers

    Are you a Mitsubishi Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...