Question about 2008 Porsche Cayenne

1 Answer

Need to change right side indicator bulb

Aware of the special tool needed to take out headlight, had it changed professionally (no charge, although) and it blew again the next day! May be electrical (I hope not!) but would like to change again to give it another chance....anyone done this before?

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Sniper:

    An expert who has posted more than 50 answers, of which 90% or more were rated as helpful.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

  • Expert
  • 52 Answers

Open bonnet and in front panel is plastic flap which needs to be removed, then inside using a 5mm 1/4 drive socket and extension turn screw to release headlamp, it will click to release then foce the lamp out of appature. refitting is the reverse

Posted on Sep 06, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

What tool is needed to replace a headlight bulb in a Kia Amanti


Some cars are a complete b r t d to change headlight bulbs. You may need to remove the headlight unit, to do this may require the removal of the bumper. Ask a main dealer for a quote, then winge, they may explain why the cost is so high.

Jul 05, 2016 | Kia Amanti Cars & Trucks

2 Answers

How do I change the front driver side light bulb in a 03 Suzuki Grand Vitara 1.6?


Danielle, On the driver side you may have stuff in the way, which may have to be removed, to change bulb. Sometimes it is easier to remove headlight then change bulb and reassemble. Videos attached make it look fairly easy to change he bulb with out removal of headlight.
Check the attached links,instruction and guides, Good luck.
"I hope this helped you out, if so let me know by pressing the helpful button. Check out some of my other posts if you need more tips and info."
Suzuki Grand Vitara Headlight Bulb Replacement
Headlight Change 1999 2005 Suzuki Grand Vitara 2003 Suzuki Grand Vitara 2...
Auto Repair Maintenance How to Replace Headlight Bulbs
How to replace Suzuki Grand Vitara Tail Light Bulb


Jul 03, 2016 | 2003 Suzuki Grand Vitara

2 Answers

Replace bulb headlight


Most of the headlights do not unbolt to change bulbs. If it's a blown bulb you're trying to replace, look on the back side of the headlight housing. There should be a plug with wires attached going into the back. This plug should twist either to the right,left or up or down. Once you've twisted this plug out of the headlight housing you'll see the bulb you need to replace. Unplug the wire harness from the blown bulb and place it into the new bulb, being careful not to touch the new bulb with your bare hands as any oil or other contamination will cause these bulbs to blow as soon as they are turned on. Place the new bulb with harness back into the socket in headlight housing and twist into position.

Oct 19, 2013 | 2001 Hyundai Accent

1 Answer

How to replace headlight bulb on passenger side


On your 4x4 need to remove head lamp assembly to change the burnt bulb.There is no need of special tools but I recommend the job to be done by VW electrician.

Jun 28, 2011 | 2004 Volkswagen Touareg

2 Answers

How do you change a headlight bulb on a hhr


The procedure is in the owners manual, but it is not easy. You need to turn the wheels in (to right for drivers side) and then shut car off. Then you will need to loosen the inside front wheel well, which is plastic, until you can bend it out of the way enough to reach inside to the bulb. The bulb twists out with a 1/4 turn to the left and then unplugs. Just a hint, make sure that the gasket comes out with the bulb and that you only use one when you reinstall the new bulb. If you need to replace the fog lights, that bulb is replaced the same way.

May 19, 2010 | 2006 Chevrolet HHR

1 Answer

Do I need a special tool to change the bulb in my 2006 dodge caravan headlight?


NO - the bulb is held in with a lock ring that can be turned by hand (if you can get your hand in) and removed with no tools. Look under the hood where the wiring connector connects to the headlight and you will see the ring around it. Remove the wiring connector, turn the lock ring counterclockwise until it pops loose, then wiggle the bulb out. It is held in by a rubber seal and may need coaxing. Installation is the reverse. It is recommended you replace both bulbs (right and left) and keep the working one as a spare. Avoid touching the glass part of the new bulbs.

Dec 18, 2009 | 2006 Dodge Grand Caravan

3 Answers

Nissan Maxima - 2004 - Headlight replacement


Sometimes, if you buy it from a good auto parts store, you may get someone to replace it for you. its not rocket science ,but sometimes it is. ; )

Sep 21, 2009 | 2004 Nissan Maxima

1 Answer

How to Change the headlight bulbs for my 1992 Buick Regal


A torque bit screw driver are a philips screw driver should be all you need. JUST MAKE SURE NOT THE TOUCH THE BULB (new bulb) WITH YOUR FINGERS. Your body oil will make the bulb burn out quick!!!! Wear rubber gloves when installing the new bulb. f one is dim, you better change both sides. are the other side will also be dim.

Feb 06, 2009 | 1992 Buick Regal

2 Answers

Replacing headlights


There are two clips for each light; one to each side just lift up on the clips. Then you have four upper and two lower grill clips that are the push/pull type. Just pull where the clips are located and they will pull right out. Watch for stressing the wiring going to the running lights. You then can pull the headlight grill assy out far enough to change the lights. Low beams are to the outside and high beams to the inside. DON'T TOUCH THE BULBS!!! A little twist left or right will unlock the bulbs. Use some contact grease to make sure the contacts stay good. 15 - 20 minute job.

Nov 30, 2008 | 2004 Chevrolet TrailBlazer

3 Answers

Side light bulb change on hyundai terracan


hi there
the solution is simple,
you only need to undo the screw on top of the side light/indicator. then facing the head light place a flat headed screw driver under the bottom lip of side light. the bottom of the lihgt is on a small push fit stud, use a sponge or cloth to protect your bumper paint work then just apply pressure gently to lever side light out towards you, It will come dont worry, you may then change your bulbs if you wish remove the whole light unit you will see the bottom bolt as soon as you release the side light. to replace just push back into place then replace screw. whole job takes about five minutes

hope this helps kevan hildred

Nov 23, 2008 | 2003 Hyundai Tucson

Not finding what you are looking for?
Cars & Trucks Logo

662 people viewed this question

Ask a Question

Usually answered in minutes!

Top Porsche Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

ROBERT GARCIA
ROBERT GARCIA

Level 3 Expert

905 Answers

yadayada
yadayada

Level 3 Expert

76630 Answers

Are you a Porsche Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...