Question about Mazda Cars & Trucks

Open Question

How do you get the top starter bolt out on a 1989 mazda b2200.

Posted by on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
rcampsr
  • 90 Answers

SOURCE: I want to turbocharge my 1989 mazda b2200 what do i need to get?

Your best bet would be to find a used engine assembly with ECM that already has the turbo and intercooler installed on it that will fit your vehicle as a changeout. There are a few differances in turboed engines, the pistons are heaverier duty, the crankshaft is heavier duty, the camshaft has a different performance curve and the ECM is different for the carburation or fuel injection. It would take you a lot of work to convert the engine over so it won't blow up when you jump on it due to overcharging the system. There are quite a few vendors that sell aftermarket packages, but that puts the turbo on the engine and does nothing for the engine strength, especially if you want real performance. Turbos are adjustable for the amount of boost the engine gets and the timing when the waste gate releases the boost to keep from blowing the engine. Depending on where you reside you may also have a problem with smog regulations, especially is there are annual inspections required. Good Luck, RAC

Posted on Apr 14, 2009

Ad
soc21610k
  • 215 Answers

SOURCE: price on a 1991 B2200 Mazda Pickup truck carburetor

Depends if you want new or used, Location, and a few other variables

Posted on Jun 04, 2009

  • 1 Answer

SOURCE: 1989 mazda b2200 can not set timing

i have a 1988 mazda b2200 and i was sittin still runnin and it was a lil low in water and i was just ab to take off when it cut off. it made steam *** out the hood. the thing is its gettin eletric to the plugs and its gettin gas and i even tried a lil eather and its turnin over it just want crank. do u have a idea wat it could b? im thinkin it jump timeing.

Posted on Feb 25, 2010

  • 3 Answers

SOURCE: how do i reset check engine light on a 1989 mazda

Disconnected the battery for 30mins and then connected again.

Posted on Mar 11, 2010

emissionwiz
  • 76846 Answers

SOURCE: how many bolts hold a starter on in a Mazda 626 1995?

there are 3 bolts holding it to the transmission bell housing, see picture below.


ced404c.jpg

Posted on Apr 03, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do i remove the steering wheel on a 1989 mazda b2200


Remove drivers knee panel then electrical plugs to steering column. Nest inside the engine bay remove the bolts from the universal joint. Last remove the two bolts holding the steering column to the dash frame.

Feb 14, 2015 | 1988 Mazda B2200

1 Answer

1989 mazda b2200. new batt. new cables, new altornater. will not hold a charge. will not charge off alt.


Sorry this isnt a solution but i am having the same problem with my mazda b2200 i replaced the alternator and now the battery will not hold a charge. Please help

Jan 26, 2011 | Mazda B2200 Cars & Trucks

1 Answer

How do i lower the spare tire on 1989 Mazda b2200 pickup?


will need the original wheel tools is about 4 foot long with hook on one end and square solid tool joint on the other which takes the handle supplied. go to the rear of the vehicle and insert the tool into the slot on top of the spare wheel and wind anti clockwise until the wheel is onthe ground

Jul 27, 2010 | 1988 Mazda B2200

1 Answer

I have a 1989 Mazda b2200 and I need to change the fuel filter how do I do that?


Its pretty simple, just 2 hoses to take off, and put them on the new filter.

May 08, 2010 | 1988 Mazda B2200

1 Answer

Starter in 89 Mazda b2200 truck just spins a number of times before it starts


that sounds like a faulty silnode which usally sits on top of the starter or missing or worn out teeth on the fly wheel

Mar 17, 2010 | 1988 Mazda B2200

1 Answer

Can I replace the solenoid on the starter on a 1989 Mazda B2200 Truck?


You may be able to replace Just the Solenoid on the starter but at that point it's Easier & Faster to replace it completely with re-manufactured unit or a Dealer part.
I'm going with my gut here but if you got 150+thousand miles out of the old starter a new factory starter should last just as long !

Mar 17, 2010 | 1988 Mazda B2200

2 Answers

1989 mazda b2200 can not set timing


i have a 1988 mazda b2200 and i was sittin still runnin and it was a lil low in water and i was just ab to take off when it cut off. it made steam *** out the hood. the thing is its gettin eletric to the plugs and its gettin gas and i even tried a lil eather and its turnin over it just want crank. do u have a idea wat it could b? im thinkin it jump timeing.

Feb 17, 2010 | 1988 Mazda B2200

1 Answer

Rebuild starter or get one remanufactured?


http://www.autopartsworld.com/mazda_parts/b2200/startermotor/1989.html $62 with $22 core
http://www.autozone.com/autozone/catalog/parts/partsShelf.jsp?displayName=Starter&itemId=prod61198&isSearchByPartNumber=&sortType=null&totalPages=[I@172fe06&currentPage=1&vehicleNValue=&navValue=16400045&parentId=cat30072&fromString=&fromWhere=null&filterByKeyWord=&categoryNValue=&categoryDisplayName=Starting+%26+Charging&_requestid=845319 <autozone both are pretty inexpensive.most likely bendix is bad more trouble than its worth to open one up....

May 31, 2009 | 1989 Mazda B-Series

1 Answer

1989 Mazda b2200 starts but won't stay running


My mazda b2200 starts and will stay running as long as the key is in the start position, but stops as soon as the key is turned from the start position

Feb 07, 2009 | 1989 Mazda 323

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

20 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mazda Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8560 Answers

Are you a Mazda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...