Question about Cars & Trucks
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Check for a bad temperature sensor. To check it, remove it first. Using an ohmmeter measure its resistance, which should decrease when dipped in hot water. If the the resistance remain high and doesnt change then you know it is bad, and you don't end up wasting money on buying one when it is still good.
Posted on Aug 12, 2009
gheck gas tune,could be mixture,definately settings or pressure loss,making the system take a few seconds to start the car,get it looked at,not one for the novice,but is very fixable
Posted on Oct 28, 2009
either your alternator is faulty or your battery is not holding charge
i would check the alternator and the battery and replace either or both
Posted on Jul 09, 2010
next time it wont start, pour hot water over ecu, if it starts replace ecu, you will need a scanner to reset as it will go into theft mode when you fit new ecu, beware that this is a common fault and you can buy 2nd hand faulty computers.
Posted on Jul 23, 2012
Need year/make/model/mileage of vehicle to provide a more specific set of troubleshooting steps.
When was the last tune up? Hard starts when cold are usually caused by fouled spark plugs, worn plug wires, or weak ignition coils. Fuel systems are not as effected by temperature changes as the ignition components.
Posted on Nov 28, 2012
Tips for a great answer:
Oct 27, 2016 | Cars & Trucks
May 02, 2014 | 1999 Ford Falcon
Oct 23, 2012 | Cars & Trucks
Jul 08, 2010 | Ford Futura Cars & Trucks
Mar 29, 2010 | 1990 Ford Probe
Oct 27, 2009 | 2005 Ford Futura
Aug 30, 2009 | 2005 Ford Futura
19 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: