Question about Chrysler Cars & Trucks

1 Answer

2004 Chrysler Pacifica coil pack replacement instructions

I need to replace the coil pack in my 2004 Chrysler Pacifica & I don't have an instruction manual to know what I need to do the replacement

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Chrysler Master
  • 14,228 Answers

It says you need to remove the upper intake manifold to get to the coils,here's the link to it,then I will send the other link to removing the coils too. Repair Guides Engine Mechanical Components Intake Manifold AutoZone com Here's the second link on removing your coils. Repair Guides Distributorless Ignition System Ignition Coil AutoZone com

Posted on May 14, 2017

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I change the spark plugs on a 2007 Chrysler Pacifica?


the upper plenum will need to be removed on the 4.0 liter. Once the plenum is out of the way the coils can be removed and the plugs replaced.

on the 3.8 liter remove the plug wires from the plugs one at a time and replace that spark plug. Place the wire back on the plug as soon as it is installed and move on to the next.

Oct 08, 2016 | 2007 Chrysler Pacifica Touring

1 Answer

How to replace a EGR valve on a 2004 pacifica 3.5


The EGR is on the drivers side of the engine near the firewall side next to the exhaust pipe it has a wire to disconnect then take out the two bolts that hold the tube to the valve now remove the two bolts that hold valve to engine put back in reverse order

Sep 17, 2014 | 2004 Chrysler Pacifica

1 Answer

Trouble code p0845 trans fluid pressure sensor where is this sensor located


In the solenoid pack. Look down between the radiator and transmission. The solenoid pack is right there. Big electrical plug going to it. Clean it and around it well before replacing it. You get dirt in the holes after you remove it. You may have to pull the valve body and clean it.

Jan 17, 2014 | 2004 Chrysler Pacifica

1 Answer

I am replacing right rear wheel assembly (pads not drums) on 2004 pacifica. I have removed everthing but don't no how to loosen the brake cable from rear knuckle. instructions great pics better?


I generally use a pair of side cuts to loosen tension on the spring and it will come out of the socket. If it doesn't NEED to come off, leave it. Sometimes it can stay attached with little to no problems.

Apr 14, 2013 | Chrysler Pacifica Cars & Trucks

1 Answer

Chrysler pacficia wont start when i turn off car and i just got a new starter?


get some starting fluid and spray it in the throttle body and if it starts and then dies you lost fuel and it can be as simple as replacing the fuel filter and adding fuel injector cleaner but if it doesnt start then u lost spark and just about all the time on vehicles with coil on packs its the crankshaft postion sensor

Jan 29, 2013 | 2004 Chrysler Pacifica

1 Answer

My a/c is barely blowing out air,the air is cold but it won't blow with force. When I turn the heater on it does the same thing


your cabin air filter is most likely clogged. instructions for replacement are in your owners manual.

Jul 21, 2011 | 2004 Chrysler Pacifica

1 Answer

Diagram where are spark plugs in 2004 Chrysler Pacifica and how to replace them


They are under the coil packs. The rear three can be replaced easily with a male 25 torx socket and a 5/8 plug socket. However, the front 3 require removing the air intake plenum first. There are several sensors that need to be unplugged. Also the throttle linkage needs to be unhooked. Several bolts around the edge of the plenum that hold the oil fill, dipstick, support bracket, etc. Also the intake hose clamp needs to be removed. Finally there are seven bolts that hold the plenum to the intake. These 7 bolts have loctite on them that needs to be cleaned off and new applied during installation. Take your time and the plenum comes off easily. Be especially careful not to drop anything down the intake once the plenum is removed. The good news, Chrysler says 70,000 between changes so you don't have to do it very often.

Here is a link to dl the manual as I was unable to find a diagram. Hope this helps some.
http://carservicemanuals.blogspot.com/2010/05/chrysler-pacifica-2004-service-manual.html
Good luck.

May 09, 2011 | Chrysler Pacifica Cars & Trucks

1 Answer

How do i program my 2004 chrysler pacifica garage door opener?


The process is to liengthy to post here.

Goto HOMELINK.COM (they make the system)

DOWNLOAD THE PROGRAMING INSTRUCTIONS

HAVE A GREAT DAY

Jan 28, 2011 | 2004 Chrysler Pacifica

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

29 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

yadayada
yadayada

Level 3 Expert

75077 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7768 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...