On my handset, model D3098 the Visual Blinker keeps blinking. How do I stop it from blinking?

The turn switch in the steering column is probably bad,

This is a common problem check the ground on that tail lamp assembly as you step on the brake the power sent to the bulb can not find ground and is returning thru the turn signal bulb so 2 positive sources keep the bulb out.

Replace the BCM.

Your right rear turn signal bulb is blown.Replace the bulb and the fast blinking will stop.

Hi,
Looks like the blinker relay needs to be replace! It blinks once and stop, means the relay bi metal is burned and have to be replace.
hope that helps you out!

is your blinker bulb out.. that is usually what it means....

remove the bulb and check voltage at the socket then check ground at the socket

its the fuse. wen a bulb blinks fast and cuts in and out its the fuse for the blinker. buy it at pep boys or any part place

replace the hazard light switch it is the flasher unit for both blinkers and hazards.

I have had this happen and it is rare, but I have had a filiment burn out in a two filment buld and short to the other filiment. It does happen and I think this might be your problem, the only way to find it is a visual inspection of each bulb. I am sure many people will think this is crazy, but I have had the exact same problem, I had the schematics, tested the circuits,etc. and them by accident found a stop/blinker 1157 bulb that had done this exact thing. I hope this helps you, check the bulbs in your headlights also.