Question about Toyota Cars & Trucks
The passenger side window will not operate from the drivers door switch or the passenger door switch. I've replaced both switches. I've checked the circuits and grounds all checked good. Right now I'm scratching my head as to why I'm only getting power on one side of the fuses. Appreciate any insight you may have. Thanks
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: 2002 ford mustang power windows
Not sure what a gem box is but we had the same problem on our 94. It was the plastic drive gear in the lift motor. Auto Zone sold the entire assembly for about $50. Yours might be rebuildable ie. plastic gear replacement. Considering where it is located R&R was relativly easy. Rmember to suuprt the window so as not to change position when you rmove the motor assy. Good Luck
Posted on Sep 10, 2008
I have a 2004 honda pilot.The passinger door and the back door behind the driver seat will not lock or unlock with remote or with door lock switch,What can I do to fix it?
Posted on Nov 22, 2008
Their are two fuses that power this system. One is a 15 amp gauge fuse and the other one is a 30 amp main power fuse. You can also check the power main relay, your ignition switch, or i could possibly be a fault in the wiring
Posted on Mar 11, 2009
check the wire bundle that runs between the drivers door and the door post. This door is the most used in the entire vehicle which makes these wires flex and eventually break. I had the exact same problem, did exactly what you did until I finally figured out the problem was not where the symptoms showed up. It is a very tight spot to do any kind of a repair, but I did it and so can you.
Posted on Apr 03, 2009
I know its not what anyone would want to here but sounds like a short. Best thing to do is first wiggle your key switch when the vehicle in in the on position then at the same time try to check to see if locks or windows are working. Then do the same in while the rig is running. If that dont work your ignition is fine and you need to take off door panels and check and wiggle all conections on window motors and lock motors and look for melted or burt wire or some that might have got hot. If all is good there you need to go to the back of the fuse box were the fuses to those items plug in and check there. As far as the service engine light goes either take it to the nearest Schucks or AutoZone and they will check it for free if not cycle the key on and off 3 times and on the 3rd time leave it in the on position look at your odometer light and it will flash a code remember that code and type Dodge then the code on yahoo search and it should tell you why your light is on Hintz whay sensor is bad. Hope this helps.
Posted on Apr 05, 2009
Tips for a great answer:
Sep 12, 2015 | Toyota Cars & Trucks
Dec 02, 2014 | 2003 Toyota Tacoma
Jun 16, 2012 | 2004 Toyota Tundra Cab
Sep 08, 2011 | 2003 Toyota Tacoma
Aug 17, 2011 | Toyota Yaris Cars & Trucks
Jan 10, 2011 | Toyota T100 Cars & Trucks
Sep 05, 2009 | 2003 Toyota Tacoma
Aug 12, 2009 | 1998 Toyota Tacoma
Jul 08, 2009 | 2003 Toyota Tacoma
Sep 20, 2017 | Toyota Cars & Trucks
21 people viewed this question
Usually answered in minutes!