Question about Cars & Trucks
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
that appears to be a camshaft position sensor performance code. you can start by checking to see if the sensor is working properly, re-check and make sure that the harness is ok by checking the resistance through the harness if all looks well there make sure the computer has the latest software on it by having it scanned at your local dealer. also you can check the reluctor wheel on the camshaft for damage or debris in the way of the sensor.
hope this helps!
Posted on Feb 17, 2009
By having it scanned and cleared with an OBD tool. This light comes on when it detects a problem. Could be a bad gas cap, or it could be a misfiring engine. The code you get from having it scanned will pinpoint the trouble area
Posted on Sep 08, 2009
The check engine light is on for a reason. You need to pull the error codes, and resolve all of the issues indicated. Then the light will go off.
If a condition were to happen, and be intermittent, the light would go out....But your description appears to have a fault condition detected. It is better and less expensive to fix the issue(s).
Posted on Oct 10, 2009
AR82.60-P-7502-01A Coding Radio
(MODEL all with CODE (750) Radio Becker Europa 2000 with CODE (751) Radio Becker Grand Prix 2000 with RDS)
(MODEL all with CODE (353) Audio 30 APS with CODE (510a) Radio MB Exquisit with traffic news decoder, with RDS (Becker) with CODE (512a) Radio MB Special with traffic news decoder, with RDS.)
Posted on Dec 17, 2009
hi this is showing fuel trim bank 1 malfunction, this could be caused by the following things, intake leak, AIR system, fuel pressure/pump, injector/s EVAP canister purge valve, or HO2S ( air fuel mix incorrect) if it starts and runs fine, i do not think it will be fuel pump, or the injectors as this would make it run rough or even not start at all, if it was an intake leak, you would be suffering from high rev's when you start the car and would take a long time for the rev's to come down, so really, that just leaves the HO2S (sensor/s) these are located one on the exhaust manifold ( from engine follow exhaust manifold you will come to a things sticking out with some wires on) this is HO2S sensor bank 1, or if you look under the car on the exhaust, just past the catalytic converter you will see the same thing, this is HO2S sensor bank 2, it may be either of these, but i possibly would go for the first one, EVAP..it could be, if you have an air leak on it, the EVAP can be found under the hood/bonnet, at the front on the right hand side as you look into the engine/motor bay just in front of the screen was bottle...hope this helps
Posted on Oct 02, 2010
Tips for a great answer:
Jan 14, 2016 | Cars & Trucks
Apr 29, 2014 | 2005 Mercedes-Benz Mercedes Benz E320 Cdi
Apr 27, 2014 | Mercedes-Benz Sprinter Cars & Trucks
Feb 27, 2014 | 2005 Mercedes-Benz Mercedes Benz SLK350
Feb 27, 2013 | Mercedes-Benz Cars & Trucks
Jan 04, 2010 | 1997 Mercedes-Benz Mercedes Benz S Class...
Oct 10, 2009 | 1992 Mercedes-Benz Mercedes Benz 300 Class
Jul 08, 2009 | 1994 Mercedes-Benz E-Class
Jun 16, 2008 | 1993 Mercedes-Benz Mercedes Benz 300 Class
27 people viewed this question
Usually answered in minutes!