Question about Honda Cars & Trucks

Open Question

Hi I have a Honda pcs 125 year 2015 I have an intermittent problem with my indicators with working sometimes also high beam headlight and my hazard light's have stopped working

Posted by on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
MsMithra
  • 79 Answers

SOURCE: Headlights not working

If all fuses and bulbs are fine, it's probably a problem with the wiring harness. Take it to the dealer. Wiring harnesses are not something to do by yourself unless you're experienced with wiring on the specific car.

Posted on Feb 05, 2009

Ad
  • 1 Answer

SOURCE: HAZARD LIGHTS ON BUT NOT

HI,
I have the same problem - it is the relay switch attached to and behind the hazard warning triangle on the dashboard. Pull it all out (gently and replace (£60 ish). The indicators and hazard lights are on the same relay circuit. This is a well known problem for this car (amongst others - how about the wipers sticking)

Posted on Nov 25, 2008

  • 1 Answer

SOURCE: High Beam Indicator blinking

My lights have had this problem for months. From time to time I try to fix it, but I have learned the following:

1. [EASY SOLUTION] After turning off the car and turning off the headlights, when I pull the headlight switch back (toward me) and then let go, the running lights turn off. [/EASY]

Extra information that I haven't figured out how to use yet:

2. Apparently the DRL bulbs operate through the high-beam bulbs; this is why you get the high-beam light when the DRLs are broken (or whatever) and why you can turn them off with the high-beam switch.

3. My wife took the car out for a fluid change once and said the mechanic pointed at a light on the car and said, "that bulb's out," and that if she fixed it the DRL's would work normally, but she forgot which light it was. He even told her what bulb it needed. I took it to the same place and no one knew what I was talking about.

I don't think about trying to fix this very often since I realized I could turn the lights off with the high-beam switch. I used to worry that that blinker was somehow draining the battery, but it never has (whereas I once drained a brand new battery just by leaving the interior light on all night). I hope I've helped!

-Monteith

Posted on Feb 02, 2009

wireguy212
  • 1627 Answers

SOURCE: My headlights on my 2000 monte carlo does not work

Day time running lights run low voltage to the high beam bulbs so it sounds to me like you need two new bulbs or you need to check the fuses and see if any need replaceing.

Posted on Dec 07, 2009

ftw1952
  • 10319 Answers

SOURCE: The high beam indicator is on. The low beams don't work.

You need a new headlight dimmer switch located on the steering column between the dash and the firewall

Posted on Jun 03, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Driver side low and high beam on but dim. Passenger side low beam normal but high beam on and dim


I would check for the groundwire continuity

Driver side - dim low beams and no hi beam - Subaru Outback ...

www.subaruoutback.org > ... > General > Electrical & Electronics
Oct 11, 2014 - Hi everyone, My drivers side headlights are dim on low, (car has separate bulbs ... When the headlight switch is turned ON, but for low beams, ...

Driver-side Low beam Not Working (electrical issue not bulb ...

www.hummer4x4offroad.com/.../showthread.php?...Driver-side-Low-be...

Mar 12, 2015 - 10 posts - ‎4 authors
The high beam continues to work on both sides...I pulled the Driverside headlamp fuse and then both left and right beams lit up but very dim.

High beams ok, but not low beam - one side only - TDIClub Forums

forums.tdiclub.com > ... > VW MKIV-A4 TDIs (VE and PD)
Jan 23, 2014 - My driver's side lights are working fine - high and low beams. ... But it definitely looks like the big lamp on the driver's side gets brighter when ..... Drivers side headlight is very dim on low beam and goes out when on high beam ...

Dim driver's side headlight (low & high beam) - GrandAmGT.com Forum

www.grandamgt.com > ... > Technical Q&A

Dec 11, 2002 - 6 posts - ‎4 authors

Jan 04, 2016 | Cars & Trucks

1 Answer

No highbeams low works fine. changed switch but still the same fuses are good. help


98 Explorer No High Beams Problem - Ford Explorer and Ranger ...

https://www.explorerforum.com/forums/showthread.php?t=374129

Nov 15, 2012 - 16 posts - ‎8 authors
98 Explorer XLT 4X4 - No high beams. I've read thru many threads here and other places about this. Pulled and checked every fuse - all good ... Fog Lights Off When High Beams Activated - Normal?
19 posts
Nov 30, 2015
Headlights not working (not MFS, Fuses, or bulbs)
12 posts
Feb 24, 2015
97 explorer no low beams high beams
3 posts
Nov 4, 2013
no headlights in 96
15 posts
May 7, 2009
More results from www.explorerforum.com

Jan 03, 2016 | 1998 Ford Explorer

4 Answers

I have a 2006 civic SI. DRL indicator is on, driver side low and high beam ok. Passenger side low beam ok but DRL and hi beam not working. Any help is appreciated.


When either the high or low beam light is out in either side, DRL (daytime running lights) indicator will come on. When one bulb goes out, that's a clue the opposite bulb will burn out soon, so its best to replace both bulbs. If it was a fuse issue, both left and right side would be out. If driver side is OK but passenger side is not, then its a bulb issue. A 2006 Honda civic takes 9006 (HB4) low beam bulbs and 9005 (HB3) high beam bulbs. Cheapest is online from Walmart site-2-store. After procuring, wear latex, vinyl, or ANY gloves to keep your (corrosive) oil skin from coming in contact with headlight glass bulbs. Your skin oil will chemically react and cause shorter life span on glass bulbs. Instruction don't tell you this, so you handle with your hands, then need to replace bulbs 3 years later instead of 5 years (or more) in the future. With gloves on, pop the hood and look behind each headlight. Turn counter clockwise to unlock headlight bulb holders. Its a quarter to half turn to unlock bulb holder lock. Replace one bulb at a time so you don't confuse high beam from low beam. The wire has a tab you need to lift to pull out & disconnect wire connector. You might need a slim narrow-**** (NOT phillips) screwdriver to lift the tab; or use your house key. Snap the wire connector to the new bulb, then twist into headlight housing to secure bulb holders, then move on to the next bulb to repeat the procedure. Pict below, 9005 high beam is on the left, 9006 low beam is on the right. Handle by grasping the plastic base, not the glass bulbs. The raised potrusion on the bottom center is where the tab locks onto wire connector. Replace all 4 bulbs now, but in the future, its likely the low beam will wear out before the high beam. In the future, replace only the pair, not all 4. The factory installs inferior bulbs that go out sooner, hoping you'll take to dealership and they ******** you with higher parts-n-labor fees. As opposed to Walmart online site-2-store, it would cost you AT LEAST triple in parts & labor from dealership to replace all 4 headlight bulbs :-(
45d1f6ac-2983-42b9-a46c-30ef441b89e7.jpg

Nov 29, 2013 | 2006 Honda Civic

1 Answer

Lights will not turn on


HEADLIGHTS NOT WORKING


It can be faulty headlight switch or issue with its wiring. Or its faulty head light fuse.


==========

To troubleshoot the issue i suggest you few help links with appropriate solution. So you can follow the test and confirm what exact problem is there in your case of headlights not working:-----

Click the link below: -----


All headlights not working?

http://repairhelpcenter.blogspot.com/2012/01/all-headlights-not-working.html

----------

Working of Headlight switch?
------------
Both headlight bulbs blow together?

------------
Car headlight bulbs don't last long?

---------------

2007 Dodge Caliber: Low Beam Headlight Not working

http://technoanswers.blogspot.in/2012/06/2007-dodge-caliber-low-beam-headlight.html

----------

2003 Toyota Camry: Headlights Work Intermittently?

http://technoanswers.blogspot.in/2012/04/2003-toyota-camry-headlights-work.html

----------

Chevy Tahoe: Low Beam Lamps are not working?

http://technoanswers.blogspot.in/2012/04/chevy-tahoe-low-beam-lamps-are-not.html

----------

2001 Chevrolet Tahoe: Headlights not coming ON?

http://technoanswers.blogspot.in/2012/04/2001-chevrolet-tahoe-headlights-not.html

--------

2004 Dodge Ram: High Beam Light is DIM?

http://technoanswers.blogspot.in/2012/04/2004-dodge-ram-high-beam-light-is-dim.html

----------

2001 Chevrolet Tahoe: Both Low Beam Lamps Not Working?

http://technoanswers.blogspot.in/2012/04/2001-chevrolet-tahoe-both-low-beam.html

------------

Low beam headlights Modification?

http://schematicsdiagram.blogspot.in/2012/04/low-beam-headlights-modification.html

---------
How to Replace a Headlight

http://schematicsdiagram.blogspot.com/2011/08/how-to-replace-headlight.html

------------
How to Replace a Headlight Bulb


http://schematicsdiagram.blogspot.com/2011/07/how-to-replace-headlight-bulb.html

-----------
How to Replace a Headlight Switch

http://schematicsdiagram.blogspot.com/2011/07/how-to-replace-headlight-switch.html

----------
How to Replace a Headlight Assembly

http://schematicsdiagram.blogspot.com/2011/08/how-to-replace-headlight-assembly.html


How to Replace a Park Light Assembly

http://schematicsdiagram.blogspot.com/2011/08/how-to-replace-park-light-assembly.html

-----------

Low beam headlights Modification?

http://schematicsdiagram.blogspot.in/2012/04/low-beam-headlights-modification.html

----------

Headlight Assembly Removal On Honda Accord

http://technoanswers.blogspot.in/2012/06/headlight-assembly-removal-on-honda.html

---------------

Honda Headlight Assembly Removal
http://schematicsdiagram.blogspot.in/2012/06/honda-headlight-assembly-removal.html

-----------

How to Replace a Headlight Door

http://schematicsdiagram.blogspot.com/2011/08/how-to-replace-headlight-door.html

----------

How to replace HID headlight bulbs for lexus 400h?

http://schematicsdiagram.blogspot.com/2012/01/how-to-replace-hid-headlight-bulbs-for.html

----------------

These will help.

Thanks.

Nov 28, 2012 | 1986 GMC K1500

2 Answers

High beam headlights will not turn on. No indicator in dash everything else works low beam and DTR


check your fuses, hi and low beams have seperate fuses for each one low and high beam. #15, #17 both 15 amps and two relays in there also.

in the fuse and relay box. is in underhood fuse box. have a good day !

Apr 09, 2011 | 2001 Honda Civic

1 Answer

No break lights, high beams, or turn signal lights


Do they work intermittently? Do your low beams go out sometimes when you put on turn signal? Do hazards work sometimes and if you play with switch they work off and on? I just had a problem with headlights would go off if I put on turn signal and if I jiggled the turn lever they would come back on and had trouble with all light working intermittently, brakes, turn and hazard. It was a Turn signal switch problem.The contacts in the switch were bad, all corroded and green when I took it apart. I know you wouldn't think this would affect brake lights but hey all run through this switch because of hazards and high beams. I got a new switch from dealer and all is working great now. Here's a link a link I used for switch replacement instructions. http://www.jeepforum.com/forum/f11/write-up-replace-turn-signal-switch-97-xj-620147/
If it isn't a fuse or wiring issue I would look into the switch.

Apr 02, 2011 | 1997 Jeep Wrangler

1 Answer

My bright light indicater is working, but I don't have any bright lights?


So, when u turn on the high-beams, the indicator light goes on, but u still have low beam headlights only? Check the headlight (either one), and see if by chance both high beams burned out at approx. the same time. U don't specify what year, I'm not sure if u have a replacement bulb, or a sealed beam headlight to replace. If the high beams are both ok, then it must be the headlight high beam switch. Let me know what u find.

Nov 05, 2008 | Honda Accord Cars & Trucks

1 Answer

The headlights come on, but the high beams and highbeam indicator do not come on when activated.


hi bassman68d,

Try to check fuse of the high beam and its electricals. if not, try to insert a new (or spare) headlights. if it still does not work, it is probably with the fuse or electricals.

hope it helps.

Jul 29, 2008 | Honda Civic Cars & Trucks

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

30 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts

yadayada
yadayada

Level 3 Expert

76109 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Kevin Daniels

Level 3 Expert

1455 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...