Question about Rover Cars & Trucks
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: Range Rover 1990 abs pump
Ok, your light WILL go out, and go back to normal once repaired, so don't fret.
Unless the pump was really loud (bad internals), you likely burned up the pressure switch (green thing on end of pump), which can be purchased in LA, USA; or through me, GreenDog Oregon (store name on Ebay US). These go out due to the pump running for an extended peroid of time, overheating the entire assembly, and allowing moisture into the pressure switch (Yes, they do go bad, and I have pictures of the inside of a bad one, full of brown muck). The reason this happens is bacause the nitrogen charge in the ABS accumulator (ball like canister attached to pump) has a limited life-span, and goes bad after about 7 years (Rave 2003). This means that the pump must run more often to accomidate braking, as it has no assist.
So, you can replace the Accumulator, and the pressure switch, and will likely be back in commission, after a proper bleeding, of course (directions for proper bleeding in Rave 2003 -CD available on ebay for appx $5)
Or, you could just replace the entire assy with a nkown good used part, and since the switch on the used part will likely be good, you can then just replace the ABS accumulator. The pressure switch is very hard to find, but I do have a couple of sources, here on the West Coast.
If you need further assistance or need a pressure switch (or parts), contact me through my ebay store, GreenDog Oregon. If you have trouble finding my store, just look for P38 and Classic parts, I'll be near the top of the store listings, as my prices are low, due to the low cost of rovers in the NW.
Posted on Oct 04, 2008
Unfortunately, there is a trick to replacing the battery.
1) Open the Driver side door.
2) Open the Bonnet and take the battery cover off.
3) Use your remote to lock and unlock the car (keeping the driver side door open)
4) Pull the Negative Lead from the battery first, followed by the Positive Lead.
5) Change or replace with charged battery.
6) Closed down Bonnet.
7) Your windows, sunroof, and key FOB will not work... so follow the next steps.
7a) Insert your key, with door closed into the exterior lock on driver's side.
7b) While turning the key to lock the door, hold down the "lock" button on your remote for 5 seconds while in "lick" position
7c) Your remote will reset, and you should be able to use your remote now
7d) While driving, roll each window down twice. On your third attempt, you should only have to touch the window button, and the window will have reset
Enjoy your Rover!
Posted on Jul 04, 2010
Tips for a great answer:
Mar 17, 2015 | 2006 Land Rover Range Rover Sport
Dec 16, 2014 | 2004 Land Rover Range Rover
Aug 29, 2014 | 2007 Land Rover Range Rover Supercharged
Jun 19, 2012 | 2006 Land Rover Range Rover Sport
Jan 21, 2011 | 2006 Land Rover Range Rover Sport
Nov 05, 2010 | 2003 Land Rover Range Rover
Oct 07, 2010 | 2006 Land Rover Range Rover Sport
Feb 07, 2010 | 2006 Land Rover Range Rover Sport
Jul 08, 2009 | 2005 Land Rover Range Rover
May 14, 2008 | 2006 Land Rover Range Rover Sport
Sep 11, 2017 | Rover Cars & Trucks
19 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: