Question about Chrysler Sebring

Open Question

@009 Chrysler Sebring. Cannot turn the key to the lock position and remove.

Posted by on


5 Suggested Answers

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

  • 22306 Answers

SOURCE: steering wheel locked all the way to the left,key

try giving it a good tug and wiggle the key at the same time

Posted on Dec 27, 2010

  • 18 Answers

SOURCE: I had locked myself out of my 2003 chrysler

Sounds like the immobilizer (SKIS) has been activated. To disable it, you would need to plug in a Chrysler scanner (DRB-III) with current software and input the appropriate PIN number (available only from Chrysler upon proof of ownership. Your best option at this point is to contact your local dealer

Posted on Apr 11, 2014

  • 344 Answers

SOURCE: I have a broken key in a 2008 Chrysler Sebring,

please take it to a shop, removal of the air bag is dangerous if you don\'t know what you are doing and it has to be removed then the steering wheel pulled ect.

Posted on Aug 24, 2014

SOURCE: I have a 2000 Chrysler Sebring jxi and my key is stuck in the ignition it will not turn to the off position. What can Ido?

Press and hold ypur breaks, or lock your steering wheel and try to release the key

Posted on Dec 21, 2015

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

I have a 1998 chrysler convertible sebring. My ignition is on the steering column. My question which is the off position. It's making me crazy. Son thinks I'm leaving in acc. Help please

most ignition switches have the following positions in sequence
off, accessories, run start
you insert/ remove the key when the switch is in the off position
acc position allows radio , stereo phone etc
run is where the engine is running, start is the last position and is where the engine starts and runs
normally you have to move it back to the off or the key will not lock the steering and will not come out of the switch

Mar 22, 2017 | Chrysler Cars & Trucks

1 Answer

How do I replace my whole ignition assembly on a 2000 Chrysler Sebring jxi

Start by removing the two lower shroud screws and remove the upper and lower steering column cover.
Look along the lower casing of the lock cylinder housing and you will see a small (1/8") hole with a pin in it.
Put the key in the cylinder and turn it to run. While in this position, push the pin into the lock cylinder and pull the key and cylinder out.
To install, turn the new key in the new cylinder to run position and slide it into the housing. To lock it in place, turn the key to the off position.

Oct 25, 2014 | 2000 Chrysler Sebring

1 Answer

I have a broken key in a 2008 Chrysler Sebring, will not go back to lock position. How do I remove an in-dash cylinder on a 08 Chrysler Sebring (4dr).

please take it to a shop, removal of the air bag is dangerous if you don\'t know what you are doing and it has to be removed then the steering wheel pulled ect.

Aug 24, 2014 | Cars & Trucks

1 Answer

I need to reset my chrysler sebring alarm

You'll need someone with a scan tool for that to look at the VTSS inputs..You might try turning the key into the off position, then turn all the way on with out turning the motor over and let it sit like that for 10 min without touching it. This will reset the anti theft program in the cars computer. After 10 min turn the key to the off position and then try to start the car...Sometimes its as simple as locking and unlocking the drivers door a few times with the key..Theres really no 1 way ... (i have found)...Do you have the owners manual for the car??? That should tell you how to do it...

Nov 09, 2011 | 2001 Chrysler Sebring

2 Answers

HELP please!! My daughter has a 96 sebring convertible and today she put her key in the door to unlock it and the alarm started going off. It wont stop, have disconnected the positive and negative battery...

Just a quick note once you hook the battery back up try locking it and unlocking it from the drivers door, if that fails you might try the passenger door. I know on some chrysler products you have to lock and lock again to arm and unlock to disarm. I hope this helps.

Sep 05, 2010 | 1998 Chrysler Sebring

2 Answers

Locked keys in trunk 2000 sebring how can i get to them

Here is how I done it with my 2002 Sebring LimitedIf the car has a release button on dashboard but you don't have keys to turn on ignition, (they locked in trunk) remove fuse cover (end of dash drivers side) remove fuse marked for dash lights and PRND1234 leave for 2 or 3 min then while holding trunk release button re-insert fuse and trunk release should work

May 09, 2010 | 2005 Chrysler Sebring Conv

1 Answer

I have 98 chrysler sebring and my ignition is lock and i cant turn my car on

First if the steering wheel is locked try to turn the steering wheel away from the locked position and and jiggle the key at the same time. If you have another set of keys try them too. I did have one of these tumblers go bad before if the other two things don't work you will probably have to replace the tumbler which is kinda hard to do if you can't turn the key on because to get the tumbler out you have to have the key on and push a button underneath as part of a security so its not easy to steal. You can get it out with a hammer and punch where the button is to force it out but be carefull not to break it. If you dont have a new tumbler right away you can use a large screwdriver to start it temperoly after you get the old tumbler out.

Mar 15, 2010 | 1998 Chrysler Sebring

1 Answer

I have 1996 sebring my key is stuck in the ignition

first thing to try would be to remove car from park to a gear and then put firmly back into park...... then retry,
if doin that a few times dont work, you will prob need to replace the ignition cylinder....... make sure it appears gear selector levers parts are all in their place,, visually that is

Jan 22, 2010 | 1996 Chrysler Sebring

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

20 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts


Level 3 Expert

77939 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22306 Answers


Level 3 Expert

814 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides