Question about 2004 Hyundai Santa Fe

Open Question

2004 santa Fe battery & brake light on now it won't start

Posted by on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 1 Answer

SOURCE: 2002 HYUNDAI SANTA FE

I had the same problem with a 2003 Hyundai Santa Fe. While driving to work as I pressed on the gas the brake and battery light would come on. When I applied the brake, the lights would go off. When I got to work I turned the car off and then tried to start it, nothing. The car made a funny sound while running and I could smell somethig smoking. I replaced the alternator and all is good again. When removing the alternator the bottom lifts off the mounting bracket, you cannot drive the bottom bolt back through the mount as I tried to. Simply remove the nut on the bottom bolt and remove the top bolt, then lift the alternator out.

Posted on Oct 26, 2008

  • 1 Answer

SOURCE: Fog Light Replacement Hyundai Santa Fe

The above statement is GREAT!!! The wheel-well piece folds down across the area you need to be in. There are 2 screws to undo this part. Push it back and there is a cap that unscrews which holds the wires and socket he is talking about. Unscrew the cap, unscrew the wire and housing. The bulb comes out. You pull the wire harness off and install the new bulb. It has a triangular push-in and it has to go just right so take note of how it comes out. Also, being a halogen light bulb, do not touch the bulb with your hands - the oils will make it explode.

Posted on Apr 06, 2009

goalie39
  • 469 Answers

SOURCE: ''check engine light'' illuminated, 1004 Hyundai, Santa Fe

If you live in the US, take it to qany Auto Zone store and thy will read the codes off for you, I would suspect any right thinking competitor would do the same, check if you don't have one near by.

Hope this is of some help.
Ed

Posted on Apr 21, 2009

  • 148 Answers

SOURCE: 2003 Hyundai Santa Fe ABS light is on along with TCS light

you may have damaged the ABS sensor or wire to the sensor up front check the wire that runs from the inner finder well and make sure it connected to the ABS sensor on the spindle

Posted on Jul 15, 2009

SOURCE: How to remove rear brake rotors

THE REAR BRAKE ROTOR IS A LOOSE ROTOR AND SHOULD COME OFF EASILY. IF NOT, IT IS POSSIBLE THAT THE ROTOR IS HELD BY RUST ONTO THE HUB OR THE BRAKE SHOES IS STILL EMBEDDED INTO THE ROTOR. REMOVE THE HANDBRAKE CABLE TO ENSURE THAT THE BRAKESHOES COLLAPSE AND TRY TO LOSEN IT AGAIN. IF SEASED ONTO THE HUB BY RUST, KNOCK THE ROTOR WITH A COPPER HAMMER TO BRAKE THE RUST WITH A RUST REMOVER.

Posted on Jul 15, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2004 Hyundai santa fe brake lights on passanger side replaced bulb still not working


Dude you need to do a circuit test to check for power at the bulb socket with someone pressing on the brake pedal, or use a short stick wedged against the drivers seat.
Have you had a towbar fitted recently, these are a constant source of faulty connections !

Aug 19, 2013 | 2004 Hyundai Santa Fe

1 Answer

2004 Santa Fe can't pull a fault code for ABS TCS lights coming on What can cause this?


It takes a special scanner to retrive this code, a generic handheld won't get it,

Jul 25, 2011 | 2004 Hyundai Santa Fe

1 Answer

1. Brake Light Came On 2. Steering got stiff


Check your belt/tensioner, and alternator. Either the belt has no tension or your alternator has gone bad.

Apr 06, 2010 | 2004 Hyundai Santa Fe

2 Answers

Instructions,repairing a rear passenger tail light assembly for 2004 Hyundai Santa Fe


Made a video of me replacing the brake light but I show how to remove and install the tail light assembly. It's on a 2005 Hyundai Santa Fe but should be the same as a 2004.

Dec 18, 2009 | 2003 Hyundai Santa Fe

1 Answer

02 Santa Fe brake and battery lights wet conditions only


sounds like you got the altenater wet which can cause oxidiseation .yo should check this at a auto electricions

Jul 07, 2009 | 2001 Hyundai Santa Fe

2 Answers

Brake light and battery light came on at the same time


Have your alternator and alternatorwiring checked, if the ALT light goes on, so does the brake. So it could be that the alternator is faulty. Also check the fuses.

Jun 29, 2009 | 2001 Hyundai Santa Fe

2 Answers

Changing the tail light assembly on a 2004 hyundai santa fe


Made a video of me changing a brake light but I show how to remove and install the tail light assembly. It's also on a 2005 Hyundai Santa Fe but should be the same.

Apr 11, 2009 | 2004 Hyundai Santa Fe

1 Answer

02 santa fe tcs & abs lights on


haynes has one id try bleeding the brakes or replace them an bleed

Aug 10, 2008 | 2004 Hyundai Santa Fe

Not finding what you are looking for?
2004 Hyundai Santa Fe Logo

Related Topics:

24 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hyundai Experts

yadayada
yadayada

Level 3 Expert

75066 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7754 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...