Question about Toyota Camry

Open Question

2004 carmay actually light blinking fast. Have replaced proper relay. Any other options to test?

Posted by on

Ad

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

Ad
canwoodjc
  • 3301 Answers

SOURCE: Left signal light blinks fast

normally when one light blinks fast its due to a intermittent ground loss, this can either be at the socket, or in the bulb itself, remove the bulb and check to be sure that its getting a good contact ,,

Posted on Sep 09, 2011

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a 2002 ford explorer sport track truck,front blinkers blink fast, back ones don't work, brake lights don't work, fuses good and bulbs. Is there relays bad maybe ? Help!


No relay's , wiring problems maybe . Viewing wiring diagrams an using a DVOM - digital volt ohm meter to test the electrical circuits is the way to find the problem . Blinkes flashing fast would indicate a bulb out or wiring problem or the switch .
Basic Electricity for Service Techs Ohm law Current Flow Opens Shorts
Electric Testing Techniques You Need to Know

Free wiring diagrams here http://www.bbbind.com/free-tsb Enter vehicle info. year , make , model an engine size. Under system click on lighting , then under subsystem click on turn signals . Click the search button ,then the blue link .
The brake light's not working could be the brake light switch ,located on top of the brake pedal arm (linkage) . Test for B+ voltage into the switch an out when pushing the brake pedal .

Mar 10, 2018 | Ford Explorer Sport Trac Cars & Trucks

1 Answer

Alpha Romeo 156 My Left hand indicator light stays on continually, does not flash. and when I turn the hazard light switch on both indicators continually glow.


Generally speaking, symptoms of a bad or failing turn signal bulb are usually the culprit...in your case, either it's the front left or rear bulb. Varies for different vehicle makes...common signs include:
  1. turn signal light staying on solid
  2. or blinking very fast
  3. or either sides of the bulbs stop blinking altogether.
To test this, make sure you reconnect everything you disconnected.
Turn the left signal light on; go to the front of the vehicle, is the turn signal bulb illuminated? If it lights up, even though it is not blinking obviously the bulb is okay. If it doesn't, replace it- problem solved. You'll do the same procedure for the rear turn signal Is that lit up? If not replace the bulb and the problem is solved.
Another common failure is when the turn signal blinks really fast, same procedure as mentioned above.
If both bulbs for the left side and right side illuminate but don't blink, the problem is in the steering column turn signal switch.
If the left or right side blinkers don't work properly at all...then check the integrated hazard warning/turn signal flasher relay- that may be defective; again, that's usually the case if both sides of the signal light don't work.
If you are blowing any fuses related to the flasher system, you have an electrical overload in the turn signal circuitry.

Feb 12, 2017 | Cars & Trucks

1 Answer

Turn signal relay location


look in the fuse box location, follow the diagram for the signal relay or
you can turn on the signal to hear the clicking sounds to locate it

Sep 29, 2015 | 2004 Lincoln LS

1 Answer

Turn signal blink fast but hazard blink proper what does this indicates


Maybe nothing, but check all your turn signal lights, front and rear. Often, a fast blinking flasher indicates a burnt bulb or one not working somewhere. If all are working, it just may be the nature of the turn switch and the flasher relay for it.

Mar 20, 2015 | Cars & Trucks

1 Answer

Is my 2004 GMC Canyon turn signal flasher a replaceable part?


hello,
yes it is replaceable, it should be under the dash lower panel, but the fast blinking sounds like a bulb is not working or a bad connection, if you replace the flasher the you may want to make sure that you have the electronic version as they are more reliable. and the other thing is to make sure that you have a good ground in your wiring and that all the connections are dry, tight, and installed properly by color code

Sep 08, 2014 | 2004 GMC Canyon

1 Answer

2008 CTS front directional not working?


Try replacing ALL directionals for the side that is not working properly. That fast blink in the back usually means bad bulb, but could also mean bad relay.

Can you elaborate? You say emergency flashers work, but FR directional does not. Does the bulb-in-question light when the E-flashers are going?

Oct 19, 2012 | 2008 Cadillac Cts

1 Answer

Blinks Fast, and Light Stays On.


check the relay and blown out bulbs will cause the lights to blink fast or some to stay on. one bad bulb will cause the problems.

Jul 14, 2009 | 2002 Chevrolet Cavalier Coupe

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

12 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

78919 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8836 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...