Question about Mitsubishi Cars & Trucks
Posted by Anonymous on
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
205 is the width in mm. 65 is the hight of the sidewall (.65x205=133.25mm)65 percent of the with. 15 is the diamater in inches of the rim (tire hole) for example if you keep the same rims 205 75 15 would be the same width but slightly taller.
215 65 15 is wider and taller as 65% of 215 is 139.75 millimeters. if you go to 16 or 17 inch rims u can get much bigger. the width of the tire must not rub on the insides of the fenders. the hight must not contact the top of fender taking in consideration the suspension. u can look for car clubs of that model and chat with the members.
Posted on Jul 23, 2009
Tips for a great answer:
Aug 12, 2017 | Mitsubishi Cars & Trucks
Sep 06, 2016 | 2005 Mitsubishi Grandis
Aug 30, 2015 | 2007 Mitsubishi Grandis 2.4
Apr 15, 2014 | Mitsubishi Grandis Cars & Trucks
Dec 20, 2012 | 2007 Mitsubishi Grandis 2.0
engine and the automatic transmission in this vehicle are computer
controlled and in most cases when a fault occurs a fault code is
stored in the memory of the computer control module. There are
exception to this, such as the Mass Airflow Meter and fuel pressure
problems. What must be done is to have all the basic testing done
such as a scan of the system for fault codes as well as a check with
a live data scanner tool for engine functions that are not within
range of normal, a trained technician is required to know what is
correct and what isn't, then based on careful diagnostics done from
a factory repair manual the correct part is replaced or the wiring
repaired or the computer replaced (known as the PCM), which is very
rarely the problem. Other basic checks must be done as well such as
mechanical problems with the engine as well as engine state of tune
and mileage on the engine. The transmission can have mechanical
issues as well such as no gear engagement at all or a failed pump or
other pressure related problems.
Sep 27, 2012 | 2007 Mitsubishi Grandis 2.0
May 18, 2012 | Cars & Trucks
Jun 02, 2010 | 1984 Mitsubishi Starion
Nov 21, 2009 | 2007 Dodge Ram 3500 Quad Cab Laramie
14 people viewed this question
Usually answered in minutes!