Question about GMC Cars & Trucks

Open Question

How do i check the front pump on a 2004 GMC Envoy XLT Auto Matic Tranmission to see is it pumping fluid?

The vehicle stop pulling on the road i can put the shift lever in all drive position and the vehicle want move.

Posted by on

Ad

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 45403 Answers

SOURCE: how can i fix the pump or the torque converter inside a automatic transmission with out removing it?

is there any oil in the transmission
unless you have a dipstick ( GMC products are normally sealed ) it is very possible that there is no oil in the transmission
the transmission oil pump is part of the transmission around an input shaft and requires the transmission removal for repair / replacement
take it to an accredited transmission service center and have it tested and properly diagnosed

Posted on May 14, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How can i fix the pump or the torque converter inside a automatic transmission with out removing it?


is there any oil in the transmission
unless you have a dipstick ( GMC products are normally sealed ) it is very possible that there is no oil in the transmission
the transmission oil pump is part of the transmission around an input shaft and requires the transmission removal for repair / replacement
take it to an accredited transmission service center and have it tested and properly diagnosed

May 14, 2017 | GMC Cars & Trucks

1 Answer

2004 GMC 4.2L XLT when i put the shift lever in drive the vehicle want move why?


Does it back up?
If it does,the cage that holds clutch plates may be cracked.
Trans has to come out.

May 10, 2017 | GMC Cars & Trucks

1 Answer

I have a 2004 envoy which wont move when put into gear. Is this a lockdown mode and how to fix it?


if their is a check engine light have the code read ------no such thing as lock down mode you have limp mode which will let you limp vehicle home or to a shop or off road safely sounds like a transmission problem check fluid --look and smell if it looks burnt brownish and or smells burnt try a flush with a fluid and filter change may gey lucky ---look under vehicle and check the selector cable and connections sometimes disconnect or rot away lastely possible internal problem which would need a transmission specialist to look at

Jun 04, 2016 | 2004 GMC Envoy SLT

1 Answer

Need to find location of emission pump on 2004 gmc envoy


I found this picture, for secondary air injection pump. It appears, driver side, frame rail, close to the front, hopefully.
You have to safely raise and support the vehicle to get at it.
26132003-c4gyrks1ciuv1mrpkf5g2opu-1-0.jpg

Mar 16, 2016 | GMC Envoy Cars & Trucks

1 Answer

I am having GMC ENVOY model 2004,I was driving at 120km/hrs on way to my office suddenly my vehicle slow down when I try to race but I could not then slow down to the side & stop the vehicle when...


The 2004 Envoy has a problem with the transmission failing. It could be an electronics problem, but it sounds as though there is no pressure in the transmisssion, perhaps a bad pump.

Jan 30, 2011 | 2004 GMC Envoy

1 Answer

Why does the powersteering not work on my 03 envoy, it has enough fluid.


With the engine running, check to see if the belt is turning the power steering pump. If it looks good than you probably have a bad power steering pump.

Dec 18, 2010 | 2004 GMC Envoy

2 Answers

I have owned two envoys now one 2001 one 2004 and both fuel pumps have went in them and front bearings just wondering why it keeps happening is there anyone else with these problems


there are many factors ur dealing with /fuel pumps are on and running constant like any other mechanical equipment over heats wears out craftsmanship i changed pumps on vehicles 10 yrs old with 120,000 ml than have same one back 2yrs later for a new one or 3yrs old veh out of warranty they just fail,as for bearings-- factors such as road conditions heavy loads 4x4 use high mileage non maintenance cause to wear faster and break down

Oct 19, 2009 | 2004 GMC Envoy

1 Answer

Around 1500 rpms or 55 mph engine seems to bog down


It sounds like your low on fluid, or your transmission filter is dirty and the front pump is not getting enough oil supply. Worst is your front pump is going bad. 
Check the fluid level and see if it's burnt. Good luck

Apr 06, 2009 | 2003 GMC Envoy

1 Answer

2004 4.2 ltr envoy power steering stopped working - no leaking


Most likely the power steering pump is your problem. It sounds like the shaft inside the pump has broken and it is not pumping fluid. I would install a new pump and see what happens. The other option would be the rack and pinion (steering gear). The power steering pump is the cheaper of the two and usually the problem. I hope this helps you.

Jan 02, 2009 | 2004 GMC Envoy

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

14 people viewed this question

Ask a Question

Usually answered in minutes!

Top GMC Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Freddy

Level 3 Expert

1311 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Are you a GMC Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...