Question about Kia Cars & Trucks
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: 4 wheel drive won't engage
Hello... My manual says that if your 4x4 doesn't engage could be because of a bent or broken rod, Broken chain in transfer case or a misaligned or broken transfer lever. not sure if this will help... also if you haven't already check your hubs. Are they locking in? Mine had the same problem it turned out to be the spring in the auto hub was broken.
Posted on Feb 06, 2009
The crankshaft pos. sensor is located on the left "driver" side of the engine on the bellhousing and is retained by a single 10mm bolt.The sensor may be tight,be sure to twist as you pull so that it doesnt break off in the bottom end.
Posted on Jul 26, 2009
My scanner isnt working, so i hope this can help you out some...On the left Camshaft..you will a stamp I and E...iI is for intake and E is for exhaust..The I should be up at 12 o'clock and the E should be at 4..you will also have marks on the timing plate behind the camshafts to help you line it up right...Now on the Right Camshaft you will have the same marks, but this time you want the E at 12 and the I at 7 o'clock..And the crankshaft should have a little notch on it, where you can line that up at 12 o'clock with the notch imprint that is on the plate for you..You may have to clean those areas, and use a light, so you can see them..I hope this helps you out..Goodluck...
Posted on Dec 04, 2009
Look on the shifter lever,just bellow the push button. There is another push button there. That's the one you press or depress to keep the transmission on 3rd. gear. Just press it again and the hold light should come off.
Posted on Feb 18, 2010
where the hell do i find a 1996 ssangyong musso vaccum hoses diagram that is readable because i have the work shop manual and it shows me bugger all
Posted on Apr 06, 2010
Tips for a great answer:
Jan 20, 2013 | 1999 Kia Sportage
Feb 04, 2011 | Kia Sportage Cars & Trucks
Dec 17, 2009 | 1999 Kia Sportage
May 14, 2009 | 1999 Kia Sportage
Mar 21, 2009 | 1999 Kia Sportage
35 people viewed this question
Usually answered in minutes!