Question about Cars & Trucks

2 Answers

Why not work horn my lancer 2007 - Cars & Trucks

Posted by on

  • mintvl May 13, 2017

    When you take the panel/cover off your fuse compartment there will be pictures on the back with corresponding numbers. The one that looks like a horn is the one your looking for. It will have a number beside the picture. Match that number with the one beside the fuse and check to see if it is blown. If the wire is not connected both sides of the fuse replace the fuse with the same number the is on the fuse itself.

×

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Cars & Trucks Master
  • 1,824 Answers

Under the hood in fuse box find and replace horn relay.

Posted on May 13, 2017

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 5 Answers

Check your fuses. There is some in the car and under the bonnet. The are all labeled on the inside of the cover.

Posted on May 13, 2017

Testimonial: "what number thes fuses?"

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Lancer 2007 why not work horn


Hi. Check fuse panel for horn. replace with same fuse. Check wires to horn that they are not shorting out. Check with volt meter for 12v to and from horn. Good luck.

May 13, 2017 | Cars & Trucks

1 Answer

Horn on 2006 Mitsubishi Lancer is possessed!


the problem will be a short in the horn connection under the steering wheel
probably the horn wire is shorting out when you turn the wheel
the fix is to pull the steering wheel and fix the problem

Aug 29, 2016 | Mitsubishi Cars & Trucks

1 Answer

How can i locate the diagram for the fuse for the horn in a mitsubishi lancer 2003


Sounds like the horn relay is bad, the fuse for the horn is located on the driver side look under the left of the steering wheel you will see a little compartment pull it out and you will see the fuses.

Oct 01, 2014 | 2003 Mitsubishi Lancer

1 Answer

2003 lancer o-z rally SRS light stays on and horn doesn't work..is it hte clockspring that needs replaced? is there a way to test the clockspring without removing it?


If you can locate the horn wires from the column and connect those two together momentary and the horn blows, then your clock spring is bad. Given the two symptoms your dealing with that's what it sounds like. There should be power going to the clock spring if you have a multimeter. Please be sure to locate the horn wires. Do not randomly probe wires as you could inadvertently set off the air bag.

Feb 09, 2010 | 2003 Mitsubishi Lancer

1 Answer

The horn stopped working


Check the plug connection going to the horn then check the fuse to see if it is blown out, use a voltmeter to check to see if the horn plug has power as an assistant activates the horn if you are getting power replace the horn you should be able to get a original replacement at a auto junk yard.

Nov 13, 2009 | 2003 Mitsubishi Lancer

2 Answers

2003 Mitsubishi Lancer horn not honking


Usually when the horn doesn't honk it's a blown fuse

try running the ODB sensor on it... it should tell you the code...

then you can look the code up and it should tell you the problems...


Usually AutoZone or Advanced Discount Auto will do this for free for you :)

May 28, 2009 | 2003 Mitsubishi Lancer

1 Answer

My horn on my mitsubishi lancer 2002


there is a wire that runs up the center of tour streeing column and plugs into the back of the horn switch, it is possible one of these wires has come off

Oct 28, 2008 | 2002 Mitsubishi Lancer

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

25 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

75117 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...