Question about Buick Cars & Trucks
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: Steering wheel removal
first you want to unplug the air bag. you do this buy removing the plastic surround around the steering column, where the ignition is, just below the steering wheel itself, then you have to remove the air bag by removing the bolts from the back of the steering wheel...
then get a steeering wheel removal kit, autozone has a loan a tool program.
put the steering wheel tool on and turn oit with a wrench adn the wheel will pop off...
Posted on Nov 26, 2008
You need a steering wheel puller. You may be able to rent this from your parts house. Disconnect the battery for no less than 1/2 hour before disconnecting the air bag or the air bag could deploy. Place air bag facing up or it could become a projectile if set off.
Posted on Aug 14, 2009
The washer pump is located on the bottom of the wash fluid bootle. you can access it by removing the front passanger fender liner..
Posted on Jan 12, 2010
if turn signal does not work, check the bulbs and the flasher. The flasher should be located under the dash near the steering column, but it's not necessary to take the steering wheel off unless the turn signal switch itself is bad.
Posted on Oct 29, 2010
Tips for a great answer:
Oct 30, 2016 | 2010 Buick Lucerne
Feb 10, 2016 | 2007 Chevrolet HHR
Oct 17, 2014 | 2006 Buick Lucerne
Jan 15, 2014 | 2006 Buick Lucerne
Nov 26, 2013 | 2011 Buick Enclave CX
When the airbag light (SRS) is on or blinks it means a fault has occurred in the system and the airbag diagnostic monitor has disabled the system, the most common problem that turns the light on is a break in the connection to the steering wheel mounted airbag, this is due to a rotating ribbon contact that breaks under the steering wheel that connects the airbag to the wiring harness and the diagnostic monitor, the part is called the clock spring contact, a coiled up ribbon electrical contact that turns with the steering wheel while maintaining a mechanical connection to the airgag mounted on the steering wheel, to replace this part you must disarm the airbag system and remove the steering wheel, this requires a special steering wheel puller tool and that you disarm the airbag system before you start the work, to do this disconnect the battery negative cable for 1/2 hour prior.
Oct 21, 2010 | 2006 Hyundai Tucson
Jan 29, 2010 | 1999 Ford Explorer
Apr 21, 2009 | 2006 Buick Lucerne
53 people viewed this question
Usually answered in minutes!