Question about Cars & Trucks

Open Question

I have a very small spiny cactus type unknown which has a reddish top and a greyish stalk with no sign of any green. Treatable or best to destroy?

Posted by on

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My high beam light is flashing on and off in day but when I turn the lights on it goes off. Also, I now have now day time running lights.


Daytime running Light module is overheating / it reduces power to low beam to create daytime running light . Ask yourself do I need this - If no law against it = UNPLUG control module . Your low beams will operate normal by turning on switch - Lever / Turn switch will turn on Highbeams but this switch can be Lose internally and Only cure is replace Signal Light Steering wheel switch . Common issue for all Cars is switch stalk / Lever is worn out by Aggressive use. If your car has Automatic light control - re they turn off after 30 second delay when you exit car - Try putting switch in manual mode means you Turn on - off by switch . But I really feel signal stalk is worn . DRCM is a known issue that can be unplugged . Final cheap solution unplug both high beams an Drive on low beam . $$$$$$$ spent chasing small problem will destroy $$$ needed for Bigger issues .

Jun 30, 2014 | 1996 Pontiac Grand Am

1 Answer

How to change oil power whell stering daihatsu sirion


Are you after 'changing the power steering oil'?? As your typing seems to have given some odd answers.. If YES.. power steering oil, then you should know there is NO need to ever change this oil.. However, it SHOULD be a reddish colour.. if it is deep black, or smells 'burnt' that is a sign that there is other faults and therefore needs investigation. If on the other hand, there is no deep black colour, a reddy brown is NORMAL and just continue to top up.. I hope this answers your question. Ok?

Jan 21, 2013 | 2006 Daihatsu Sirion 1.3

1 Answer

Turn signals switch doesn't switch off


U can do it u self but very arcward not the best job.
your problem is there a small stalk that sticks out behind the lever wen u straiten out it catches this and turns of this small piece does break of quite frequently.
To do this ur self u will need 2 remove the plastic colwing around steering wheel their are small screws holding this together, then check if the unit screws together or is one piece if the latter 1 piece the steering wheel will need 2 b removed first check if air bag type steering wheel if so sorry take to garage hope this helps u

Sep 02, 2012 | Cars & Trucks

1 Answer

2007 golf tdi has dash warning light.


hi,
i think the light you are seeing is the cruise control indicator. its not faulty , just switched on. the switch is on the indicator stalk. on later model they changed it so this light would only come on when you had set your speed.

Jul 19, 2010 | Volkswagen Golf Cars & Trucks

1 Answer

How do you remove the indicator stalk from an Audi A3. The steering wheel has been removed but cant get the stalk off.


The best way I found to get the stalk off is with a puller. Use an air gun to tighten the puller and watch the stalk snap off with a little pressure.

Jul 02, 2010 | Cars & Trucks

3 Answers

Warning sign on bmw 1 series 2007 looks like horseshoe with explanation mark next to it with squiggly lines underneath. do not have handbook so cannot check.


Tyre pressure warning light
Check pressures
When correct,turn ignition on and use lever on top of indicator stalk to scrool untill you see tyre pressure reset
Press end of stalk to reset

May 07, 2010 | 2005 BMW 1 Series

1 Answer

Temperature sender


It does sound like the temp sender. If the plug is destroyed so you can not see what wire goes where you either need to look at an identical car or get pin-data to work it out.

The switch will have very small numbers next to each pin, like 31, 12 , 15 etc these tell you the circuit number. Pin data informs you of the color(s) of the wire on that track... so it may say 31 = Green/yellow wire, that means the Green wire with a Yellow stripe goes to pin 31

Follow me???

PS if it is the temp sensor your car will struggle to start from cold as it informs the ECU on fuelling dependent on heat.

*DO NOT* just try putting wires anywhere, you may cause an internal ECU failure and that will be expensive.

Best regards

Lloyd

Dec 07, 2009 | 2001 Nissan Altima

1 Answer

Replacing indicator/dip /cruise control stalk 86 dodge daytona


SOUND LIKE THE CANCEL SPRING FOR THE BLINKERS GO TO AUTOZONE OR NAPA WEBSITE PUT IN YOUR CAR INFO AND TYPE IN TURN SIGNAL SWITCH ? IT WILL SHOW YOU A PICTURE OF THIS SPRING

Aug 24, 2009 | 1986 Dodge Daytona

1 Answer

What engine coolant do i use for a 2000 for focus


It does not matter which coolant you use in this system, as long as you do not mix the two different types. If you are just adding coolant to the existing coolant, if it is green in color use regular antifreeze/coolant, reddish/pink use extended life coolant. If you are not sure, I recommend draining the system, flushing with water and then adding whichever type you choose.

Jul 05, 2009 | 2000 Ford Focus

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

27 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...